Woodcraft Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they are after because most of the thoughts and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive package, and he ended up creating a really’complete’ woodworking resource.

Many may still seem unsure whether they should be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more challenging to make the ideal choice. There are in fact many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. People who are just getting started will discover the thoughts and jobs in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step-by-step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to be able to find any job of their choice in this bundle quite readily, though there so many options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who buy it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large dimensions. Nonetheless, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so thorough and vast it contains just about every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available across the net. Ted has done his very best to guide them in every possible way he could, through easy to understand textual instructions, clear pictures and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find within. So, it is definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Woodcraft Woodworking Plans

Woodworking is 1 hobby that can also be a rewarding career if you love to work together with your hands and construct exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll be able to construct all kinds of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking projects and make a handsome profit. Woodcraft Woodworking Plans.

It requires time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you will have the ability to create some really nice furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living room. It’ll be a topic of conversation whenever you have friends come over to see. They will ask: How can you make it? Where did you get the woodworking plans? How long did it take to finish the project? What kind of wood did you use? What kind of tools did you use? Just how on earth did you create such a gorgeous item of furniture? As you discuss your work, a sense of pride will encounter you and also do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Woodcraft Woodworking Plans

If you are thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Woodcraft Woodworking Plans.

Start with an idea in mind of what you want to build then get a excellent woodworking project plan that’s geared toward novices. There are several little woodworking projects for novices available for purchase from online woodworking retailers. A few woodworking plan suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to mention a couple. Obviously, you can begin with as grand a woodworking plan as you choose. However, the chances are if you begin using a little woodworking project initially, you will have a better chance of keyword finishing the job.

Your woodworking project plan should incorporate some lists! Length of: woodworking hardware, the quantity and variety of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of warning about buying woodworking tools. Just buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking tools, but you can easily break the bank buying a great deal of tools you may not utilize all that frequently. If you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also don’t forget that the wood glue and a brush to spread the wood adhesive! Obviously, you will require a dry area to work and might require a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools that novices will need. You may always increase your toolbox as you get experience!

Woodcraft Woodworking Plans Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. However, if you’re unsure about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Every month the authors in woodworking publications do a story on how best to improve your woodworking craft. Whether it’s showing you the way you can apply an end to a completed project, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodcraft Woodworking Plans

If you are a beginner and very interested in doing a DIY project for house afterward, woodworking can be interesting. If you do not have the right information, instruction, and ability, you may wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a couple of essential aspects you should remember, before starting with any woodworking project.

1. If you’re a beginner, you should first have to be very interested in woodworking. Making something new with your hands is a special feeling. Don’t begin a project if you are not interested, because this might land you in a bad place.

2. Think of the main reason for making this woodworking project. Choose the uses of the item you’re making.

3. Consider your abilities and analyze the time that you have, before you begin with a project.

4. Start projects that you can complete. If you are in the middle of a work, then it’s better not to start any project in any way.

Starting Your First Woodworking Shop Woodcraft Woodworking Plans

If you keep those vital points in your mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much because it takes effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking jobs that you wish to begin with. As a beginner, always pick a job which has a very basic build up or a simple structure. Some easy to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always proceed to the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning projects should always keyword be less complicated and less bothersome so you have a better comprehension of working with woods and their tools. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Woodcraft Woodworking Plans

Tools would be the means through which you can win the struggle of woodworking. Many people think that power tools are needs. But for beginners, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things considerably easy for you. When you buy a hammer, always assess the balance between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are different types of saws out there on the marketplace. Choose a size that you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them can help you ahead of time woodworking. You might even buy keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. However, this is not a tool for novices, but having it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills will make the task much simple.

8. Additional small and fundamental tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking jobs. Based on the type of project you want to complete, pricing can be determined. The easy the project, the less price it involves. However, at the very beginning purchasing the tools will probably be somewhat hefty. Therefore, it’s much better to resolve a budget on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t need to buy any more material aside from the timber ply.

Time and Instructions

Instructions are among the primary things that every newcomer should follow. It’s like the woodworking Bible. Instructions guide is quite simple to comprehend the procedure, what to do and how to get it done. It keyword is a systematic guide for finishing the project. Time also has a significant role in the construction of woodworking jobs. Woodworking projects demand time and so it is crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most essential thing keyword that will allow you to reach success is proper planning. With appropriate planning and a plan, it’s possible to achieve success quickly. If you know the purpose of woodworking, the thing that you want to construct, the tools you require in order to possess and the average time you can give daily; then you are all set to go.

Conclusion, Woodcraft Woodworking Plans

All these strategies and education will make the woodworking projects and strategies for beginners quickly to complete. Always ensure that you have all the vital tools, materials, area ready. Keep the instructions for constructing a product handy. Appropriate strategy and preparation will allow you to earn a fantastic woodworking job for your home.

|

Starting Your First Woodworking Shop Woodcraft Woodworking Plans

Folks when looking for a way to pass time or desire an alternate method to make money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It is very exciting to do and everyone can get started.

When doing woodworking at home there are lots of jobs one can consider. When starting out you need to be quite careful when choosing which job to start out with because there are projects which can be too tough for a beginner. But don’t worry about that since we will give you guidelines on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, therefore before you choose your project you need to be aware of if you have the available tools to work on such a job. Try not to spend a lot of cash on buying equipment when starting out, buy more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any difference between the artistic hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Woodcraft Woodworking Plans

Woodworking in your home will give you time to explore different jobs and learn so many things. That is why it’s very important to invest less money when starting out so you can manage to make errors and at any time learning about different projects.
It is extremely important you know about different kinds of wood available for creating jobs. Expect carpenters use different types of wood quality for decorating pieces, learning which type of wood that they use can help you prepare the wood you’ll need for certain projects you may choose to pursue.
As soon as you know the basics of wood choice and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good jobs to satisfy your wants.

Woodcraft Woodworking Plans practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of layouts utilizing various tools so that you can get the hang of using the tools. When starting out you may earn a range of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodcraft Woodworking Plans

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimum number of tools and equipment. A little home workshop may produce a wide array of simple projects which will allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us discuss where you will perform your woodworking, Depending on the size of your home, you might be able to create a dedicated space into your woodworking activities. This may be a reserved place on your garage or on your basement. In some cases, a detached shed or outbuilding might be ideal to set up your first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably produce dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the upper levels of the house. Another benefit of detached workshops is, of course, the noise level. You can work without bothering the remainder of the household. A good compromise might be the garage of your property.

This might help decrease the problems of dust and sound, however based on where you live, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Woodcraft Woodworking Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes that they include more space to function in. Woodcraft Woodworking Plans if you can have a dedicated place for a workshop all the better. Floor tools and bench top gear can stay in position from project to project. If this setup isn’t impossible, at least try to create a bench area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and gear. At the start, set up a bench area where you can shop and use the majority of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the bench to home your hands power tools and a pegboard above the seat to hang additional gear. Install a woodworking vice at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodcraft Woodworking Plans

The reach of your start-up equipment will be largely based on your financial plan. Whether you have got large financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, then purchase your quality tools at the regional building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional ads. You will find an abundance of quality gently used programs out there that belong to individuals who stumbled on that one molding job around the house or received tools as gifts that they will never utilize. You can usually buy tools for these sellers for less than half the initial cost and save even more money should you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will require extra time and possibly travel expenses. Weigh out the benefits of traveling across town to save a couple added dollars on a cheap piece of gear. The extra cost of travel and time in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimum quantity of hand gear yet produced sophisticated and complex pieces. Concentrate on developing your abilities with your start-up set of resources and prevent lamenting about the gear you wished you’d.
Here’s a listing of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and influence security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together if you find them uncomfortable.

The next piece of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw after the popular name, this may end up being the most versatile instrument in a start-up workshop. In fact, in the hands of a professional, a power hand saw can be used to construct an entire property. At some point, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you even start your next project. After selecting the proper saw install a quality blade. Most saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t just cut curves. It is ideal for cutting holes in wood too like manage slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more versatile but a quality floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the standard 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is much more critical than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want in your workshop. Buy an range of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot in the holder after each use. Last, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries happen. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The mind usually comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce range for overall work and also a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These types of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle just about any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you might find that your palm sander using a bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll find this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper borders, sew high stains and fix any imperfections in wood bits. {Begin with a standard amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a couple of years to accumulate a comprehensive set of wood clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure remains the same. Get a pair of the longest clamps which you could afford. You can contact them for smaller adhesive jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed in the end of the bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enable the user to quickly open and close the limbs without dull handle turning. The wood clamping surfaces in your vice will occasionally need replacement. I would rather utilize soft pine in my vices that won’t crush or damage lots of the various forests that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be one of the most frequently used tools. Buy a fantastic quality name brand tape measure with a wide tape typically from the 25-foot range. Although in your store you might not be using the tape in these lengths, the bigger tape steps offer more rigid tapes that will not flop around and slip off the ending of boards. Assessing when you’re by yourself will be a lot simpler, and naturally, quality tape measures can endure for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can help you in marking the ideal angles as well as compound angles. Get the number three and two Robertson set. I find the Robertson format works great for many woodworking projects and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. The expense of adhesive through all your jobs is a minor cost consideration. For that reason, it makes sense to decide on the best. I also have discovered over the years that I get the best results with both indoor and outdoor projects when I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Woodcraft Woodworking Plans

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of hurried lives, smart phones, and time-starved livelihood. With a minimum investment in the most rudimentary tools and equipment, everyone can learn the profitable abilities of his time-tested avocation and enjoy project after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected]materialintelligence.com – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Woodcraft Supply

Woodcraft Supply, LLC operates woodworking specialty retail stores across the United States (including 34 of 50 U.S. states). It also publishes a woodworking industry magazine, distributes consumer catalogs (in all 50 U.S. states and 117 countries)[1] and operates an ecommerce website.[2] The stores, catalogs and website combined sell about 20,000 products covering wood working tools, raw materials, instructional media and project kits.[3][4][5][6]

In the 1960s, Roger Wells bought Woodcraft and moved the headquarters to Woburn, Massachusetts. Woodcraft moved into a warehouse and corporate office after the success of its initial printed ads which led to creation of its catalog. Sam Ross, founder of SBR Inc., bought Woodcraft in 1972 and used his retail experience to build new stores and grow the company. In 1992, Sam Ross moved Woodcraft headquarters to Parkersburg, West Virginia.[8][9]

Woodcraft opened a new Boston area corporate location in Walpole, Massachusetts in 2013. That same year, Woodcraft and the Swiss toolmaker Pfeil celebrated 50 years as international business partners.[12]

Video: Woodworking Projects