Wooden Craft Projects For Adults | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re following because all the ideas and projects Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking source.

Many may still seem unsure if they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it even more challenging to make the ideal choice. There are in fact lots of things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. Those that are just getting started will find the ideas and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s simple step by step instructions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will be able to locate any job of their choice within this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it will be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large dimensions. Yet, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to direct them in every conceivable way he can, through simple to understand textual instructions, clear images and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find within. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools that beginners will need. You may always increase your toolbox as you gain experience!

Wooden Craft Projects For Adults Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. However, if you are unsure about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the writers in woodworking magazines do a story on how best to increase your woodworking craft. When it’s showing you how you can apply an end to a completed job, or how to make a mortise and tenon joint, something new can be heard each month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Wooden Craft Projects For Adults

If you’re just beginning and very interested in doing a DIY project for home then, woodworking can be fun. If you don’t have the proper information, instruction, and ability, you might land up spending more time and money than you originally meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having said, there are a few essential factors that you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first have to be very interested in woodworking. Creating something new with your hands is a special sense. Don’t begin a project if you’re not interested, because this might land you in a bad location.

2. Consider the main reason behind creating this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and examine the time you have, until you start with a job.

4. Start projects that you’re able to finish. If you’re in the midst of some work, then it is better not to begin any project in any way.

How to Become a Master Woodworker From Your Own Home Wooden Craft Projects For Adults

If you keep these vital points in your mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking jobs that you wish to begin with. As a beginner, always pick a project that has quite a basic build up or a very simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you could always proceed to the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning jobs should keyword be complicated and less frustrating so that you have a better knowledge of working with woods and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Wooden Craft Projects For Adults

Tools would be the ways through which you will win the battle of woodworking. Many men and women believe power tools are needs. However, for beginners, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when mended with vises, provide ample space to work. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things much easy for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws available in the market. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them will help you in advance woodworking. You might even buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for novices, but using it would make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and basic tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking jobs. Dependent on the type of project you would like to finish, pricing can be set. The easy the job, the less price it involves. But at the very beginning purchasing the tools will probably be a little hefty. Therefore, it is better to fix a budget on the tools, then keyword on the project. Buying the fundamental tools will ensure that you don’t have to buy any more material aside from the timber ply.

Time and Instructions

Instructions are one of the principal things which every newcomer should follow. It is like the woodworking Bible. Instructions guide is very simple to understand the process, what to do and how to do it. It keyword is a systematic manual for finishing the job. Time also plays a significant role in the construction of woodworking jobs. Woodworking projects require time and so it is necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that can allow you to reach success is proper planning. With appropriate planning and a strategy, it is likely to achieve success quickly. If you know the purpose of woodworking, the thing you want to build, the tools you need to own and the average time you can give every day; then you’re ready to go.

Conclusion, Wooden Craft Projects For Adults

These strategies and education is likely to make the woodworking projects and plans for beginners quickly to complete. Always ensure that you have all the vital tools, materials, area ready. Keep the instructions for constructing an item handy. Proper strategy and planning can allow you to make a great woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Wooden Craft Projects For Adults

People if you’re looking for a way to pass time or want an alternative method to make money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can consider. When starting out you need to be very cautious when choosing which project to begin with because you will find jobs that may be too difficult for a newbie. But do not be concerned about that because we are going to give you tips on the ideal means to start woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, so before you pick your job you have to be aware of if you’ve got the available resources to work on that project. Try not to spend a lot of money on purchasing gear when starting out, buy more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll be no difference between the artistic hand as well as the hands.

Starting Your First Woodworking Shop Wooden Craft Projects For Adults

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking in your home will give you time to explore unique projects and find out so many things. That’s why it’s very important to spend less money when starting out so that you can afford to make errors and at any time learning about different jobs.
It is very important that you know about different types of wood available for making projects. Anticipate carpenters use several kinds of wood quality for decorating pieces, learning which type of wood they use can help you prepare the wood you’ll need for certain jobs you may want to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in creating good jobs to fulfill your needs.

Wooden Craft Projects For Adults practice makes perfect so be sure that you practice your work every day if possible. Try out lots of layouts utilizing various tools so you can get the hang of using the tools. When starting out you can make a range of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Wooden Craft Projects For Adults

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimum amount of gear and equipment. A small home workshop may generate a broad array of simple projects which can allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products that you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let’s discuss where you will do your woodworking, Depending on the size of your home, you might be able to produce a dedicated space to your woodworking activities. This may be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust that travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw up dust into the top levels of the home. Another benefit of detached workshops would be, of course, the sound level. It’s possible to work without disturbing the remainder of the household. A good compromise might be the garage of your property.

This can help minimize the problems of dust and noise, however based on where you reside, a keyword garage layout may not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Wooden Craft Projects For Adults

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they include more space to work in. Wooden Craft Projects For Adults if you can have a dedicated spot for a marathon all the better. Floor gear and bench top equipment can remain in position from project to project. If this installation is not hopeless, at least attempt to make a chair area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. In the start, set up a seat area where you are able to store and use most of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. This will let you work comfortably while standing. Add a sturdy shelf below the bench to house your hands power tools and a pegboard over the bench to hang other gear. Install a woodworking at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Wooden Craft Projects For Adults

The scope of your startup equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, then buy your quality tools in your regional building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other regional advertisements. There are an abundance of quality gently used tools out there which belong to people who stumbled on that 1 molding job around the house or obtained tools as presents that they won’t ever utilize. You can usually purchase tools for these sellers for less than half of the original cost and save even more money should you create a bundle deal for all their unused equipment. Obviously, getting tools from private people will require extra time and perhaps travel expenses. Weigh out the advantages of traveling across town to save a couple added bucks on a inexpensive piece of gear. The excess cost of time and travel in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum quantity of hand gear yet generated sophisticated and intricate pieces. Concentrate on developing your abilities with your startup set of resources and prevent lamenting about the equipment you wished you’d.
Here is a listing of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and affect safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next piece of crucial safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw following the favorite name, this can end up being the most versatile tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be used to construct an entire house. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you even start your next project. After choosing the right saw put in a quality blade. Most skill saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Start with a hybrid . These possess a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t only cut corners. It’s perfect for cutting holes in timber too like manage slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the standard 3/8 inch version. Down the street, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you do not need on your workshop. Buy an range of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its prospective slot in the holder after every use. Lastly, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood grips with inferior joints between the head and handle. The mind usually comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more appropriate to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disk and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might discover your palm sander with a bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood bits. {Start with a standard amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are expensive and it normally requires the novice woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure remains the same. Receive a set of the longest clamps which you can afford. You may get in touch with them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the limbs with no dull handle turning. The timber beamed surfaces in your vice will periodically need replacement. I would rather utilize soft pine in my vices that will not crush or damage many of the different forests that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most often used tools. Buy a good excellent name brand tape measure with a wide tape typically from the 25-foot range. Although in your shop you might not be using the tape at these lengths, the bigger tape steps offer more rigid tapes which will not flop around and slip off the ending of boards. Assessing when you are by yourself will be a great deal simpler, and of course, quality tape measures can endure for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Avoid oversized carpenter’s pencils. Their large flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can help you in marking the right angles in addition to compound angles. Get the number two and three Robertson set. I find the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. The cost of adhesive through all your projects is a minor cost consideration. Therefore, it makes sense to decide on the best. I have also discovered over time that I get the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Wooden Craft Projects For Adults

The peaceful gratification of woodworking is a wonderful experience in this era of rushed lives, smartphones, and time-starved livelihood. With a minimum investment at the most rudimentary tools and equipment, anyone can learn the profitable abilities of his time-tested hobby and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

SCAMP (boat)

The SCAMP (acronym of Small Craft Advisor Magazine Project) is a wooden or fiberglass hulled Balanced Lug rigged sailing dinghy. The boat is 11 ft 11 in (3.63 m) long, and capable of accommodating four persons on a daysail or one to two for overnighting or extended cruising. Craig Wagner and Josh Colvin, editors of Small Craft Advisor Magazine, teamed up with noted New Zealand boat designer, John Welsford, to create what they call a "Mini Microcruiser" sailboat. Welsford considers it possibly the best boat he's designed, based on "suitability for purpose".[1] Some early plans details received subsequent revisions by Kees Prins and the Northwest Maritime Center.[2] While no particular feature of the boat is unprecedented, the combination of design elements has produced a "new genre of sailboat".[3]

In the course of publishing Small Craft Advisor, Craig and Josh had sailed more than 70 small boats all the while compiling an informal list of favorite features and characteristics. Some of these ideas combined with Colvin's experience on a 150-mile cruise down the Columbia River — wishing he had a smaller, shallower boat for exploring that was still capable of coping with the River's sometimes challenging conditions—inspired the SCAMP concept.[3] The emphasis was on "minimalism, efficiency and ease of use."[3] In January 2010 they contacted John Welsford and started the design process. Building commenced at the Northwest Maritime Center in July 2010.

Builder's plans were released for sale first, followed by CNC-cut kits. Gig Harbor Boat Works completed the first fiberglass production SCAMP in July 2013 and is currently the only manufacturer of fiberglass SCAMPs.[4]

Video: Woodworking Tools