Wooden Diy Gifts | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they’re following because most of the ideas and jobs Ted’s source are simple to understand and easy. Ted McGrath spent two years researching so that he could gather enough material for an extensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the right option. There are actually lots of things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit out of Ted’s woodworking Package. People who are just getting started will find the ideas and projects in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will be able to locate any project of their choice in this package quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who buy it will be backed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Yet, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overrun considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast that it contains just about every woodworking project a woodworker may be interested in building.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that are available across the internet. Ted has done his best to direct them in every conceivable way he can, through simple to understand textual directions, clear images and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. Therefore, it is definitely worth buying!

The Benefits of Woodworking Wooden Diy Gifts

Woodworking is 1 hobby that could also be a rewarding profession if you love to work with your hands and construct exquisite pieces of furniture from wood. When you learn that the woodworking crafts and become a fine woodworking craftsman, you’ll have the ability to build all types of furniture, (table, beds, and chairs), effortlessly. You can then sell your completed woodworking jobs and make a handsome profit. Wooden Diy Gifts.

It requires time to become skilled in the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you will have the ability to create some really nice furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living space. It’ll be a subject of conversation whenever you have friends come over to visit. They will ask: How can you make it? How long did it take to complete the project? What type of tools did you use? How on earth did you make such a gorgeous item of furniture? As you speak about your work, a sense of pride will encounter you and also don’t be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Wooden Diy Gifts

If you’re thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to begin in Woodworking? Wooden Diy Gifts.

Start with a concept in your mind of what you want to build and then get a excellent woodworking project plan that is geared toward novices. There are several little woodworking projects for beginners available for purchase from online woodworking merchants. A couple of woodworking plan suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to name a couple. Obviously, you can start out with as grand a woodworking plan as you choose. On the other hand, the chances are if you begin using a small woodworking job initially, you will have a better chance of keyword completing the project.

Your woodworking project plan must incorporate some lists! Lists of: woodworking equipment, the quantity and variety of wood needed, and the required hand tools and power tools to finish the project. Note: A word of caution about buying woodworking tools. Only buy what you want to finish your immediate or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools are not affordable. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you might not utilize all that frequently. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also don’t overlook the wood glue and a brush to spread the wood adhesive! Of course, you will require a dry area to work and may require a pair of saw horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and much more woodworking power tools , but the concept is to purchase the crucial hand and power tools that novices will need. You can always add to your arsenal as you gain experience!

Wooden Diy Gifts Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the writers in woodworking publications do a story about the best way best to increase your woodworking craft. When it’s showing you how to apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be heard each month. Next, is purchasing instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

The Benefits of Woodworking Wooden Diy Gifts

If you’re just beginning and very interested in doing a DIY job for home then, woodworking could be fun. If you do not have the proper information, instruction, and ability, you might land up spending more time and money than you originally intended to spend. As a novice woodworker, you need to have time and the correct tools. Having said, there are a couple of essential aspects that you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you must first need to be somewhat interested in woodworking. Making something new with your hands is a special sense. Do not start a project if you’re not interested, as this may land you at a bad place.

2. Consider the main reason for creating this woodworking project. Choose the uses of this item you’re making.

3. Consider your abilities and examine the time you have, until you begin with a job.

4. Start projects that you can complete. If you’re in the midst of some work, then it is better to not start any project at all.

How to Become a Master Woodworker From Your Own Home Wooden Diy Gifts

If you maintain those vital things in mind before beginning a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking jobs that you want to start with. As a beginner, always select a project which has quite a basic construct up or a simple structure. A few simple to begin projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always move to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning projects should keyword be less complicated and less bothersome so that you have a better comprehension of working with forests and their resources. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Wooden Diy Gifts

Tools would be the means whereby you will win the battle of woodworking. A lot of people think that power tools are requires. But for beginners, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things considerably simple for you. When you buy a hammer, always check the balance between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws out there in the marketplace. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you in advance woodworking. You can even purchase keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but using it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills will make the task much easy.

8. Additional small and basic tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking jobs. Based on the sort of project you want to complete, pricing can be set. The easy the project, the less cost it involves. However, at the beginning buying the tools will be a little hefty. Therefore, it’s much better to fix a budget first on the resources, then keyword on the project. Buying the basic tools will ensure that you don’t need to purchase any more material other than the wood ply.

Time and Instructions

Instructions are among the principal things which each and every beginner should follow. It’s like the woodworking Bible. Instructions guide is very easy to understand the process, what to do and how to do it. It keyword is a systematic manual for finishing the job. Time also has an important role in the building of woodworking jobs. Woodworking projects demand time and so it is crucial for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to reach success is proper preparation. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you know the objective of woodworking, the thing that you want to construct, the resources you need to own and the average time you can devote daily; then you’re ready to go.

Conclusion, Wooden Diy Gifts

All these strategies and education will make the woodworking projects and strategies for beginners fast to complete. Always ensure you have all of the vital tools, materials, space ready. Keep the instructions for constructing a product handy. Proper strategy and planning can allow you to earn a fantastic woodworking job for your home.

|

How to Become a Master Woodworker From Your Own Home Wooden Diy Gifts

Folks if you’re trying to find a way to pass time or want an alternative way to generate money they usually turn to a hobby they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are lots of projects one can consider. When starting out you have to be quite careful when choosing which project to begin with because there are projects that can be too tough for a beginner. But don’t worry about that because we are going to provide you tips on the ideal way to start woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your job you need to be aware of if you’ve got the available tools to work on that job. Try not to invest a lot of money on purchasing equipment when starting out, buy more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand as well as the normal hands.

Starting Your First Woodworking Shop Wooden Diy Gifts

Woodworking in your home will give you time to explore unique projects and find out a lot of things. That is why it’s very important to spend less money when starting out so you can afford to make errors and at any time learning about various jobs.
It’s very important that you know more about different types of wood available for making jobs. Anticipate carpenters use different types of wood quality for decorating pieces, learning which kind of wood they use will help you prepare the wood you will need for certain jobs you might choose to pursue.
As soon as you understand the fundamentals of wood selection and the usage of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good projects to satisfy your needs.

Wooden Diy Gifts practice makes perfect so make sure that you practice your work every day if possible. Try out lots of layouts using a variety of tools so you can get the hang of working with the tools. When starting out you can make a number of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

Starting Your First Woodworking Shop Wooden Diy Gifts

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimum number of gear and equipment. A small home workshop may generate a wide array of simple projects that can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s discuss where you will perform your woodworking, Depending on the dimensions of your home, you might be able to create a dedicated space into your woodworking tasks. This may be a reserved spot on your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first store. A heated shop detached from your home provides one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably create dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields located in the basement draw dust up into the upper levels of the house. Another advantage of detached workshops would be, clearly, the noise level. You can work without disturbing the remainder of the family. A fantastic compromise could be the garage of your home.

This might help minimize the problems of dust and noise, however depending on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Wooden Diy Gifts

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to function in. Wooden Diy Gifts if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top equipment can remain in position from project to project. If this installation isn’t hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. At the beginning, establish a seat area where you can store and use most of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. This will enable you to work comfortably while standing. Add a sturdy shelf beneath the seat to house your hands power tools along with a pegboard above the bench to hang other equipment. Put in a woodworking vice at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Wooden Diy Gifts

The scope of your startup equipment will be largely based on your budget. Whether you have got large financial resources or you are starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools in the regional building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local ads. You will find plenty of quality lightly used programs out there that belong to people who stumbled on that 1 molding project around the house or obtained tools as gifts that they won’t ever use. You can usually purchase tools for these sellers for under half the original cost and save even more money if you make a package deal for all their unused equipment. Of course, getting tools from private individuals will require additional time and possibly travel expenditures. Weigh out the benefits of traveling across town to save a few extra dollars on a inexpensive piece of equipment. The extra expense of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum quantity of hand gear yet produced sophisticated and complex pieces. Concentrate on developing your skills with your startup set of resources and prevent lamenting about the gear you wished you’d.
Here’s a listing of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. With this setup I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often known as a skill saw after the favorite name, this can end up being the most versatile tool in a start-up workshop. In reality, in the hands of an expert, a power hand saw can be employed to build an entire property. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second project. After selecting the proper saw install an excellent blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t only cut curves. It is perfect for cutting holes in wood also like manage slots. Eventually, you’ll want to get a ring saw. Bandsaws are much more flexible but a quality floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Down the road, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you don’t need on your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after every use. Lastly, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The head typically comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for overall work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle pretty much any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disc and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might discover that your palm sander with just a bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in timber pieces. {Start with a standard amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are costly and it normally takes the beginner woodworker a few years to accumulate a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the longest clamps which you could spend. You may get in touch with them for smaller adhesive jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of your seat is ideal for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enabled the user to quickly open and close the jaws without tedious handle turning. The wood clamping surfaces in your vice will periodically need replacement. I prefer to use soft walnut in my vices which won’t crush or damage many of the various woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most frequently used tools. Purchase a fantastic excellent name brand tape measure with a wide tape usually from the 25-foot selection. Even though in your store you might not use the tape at these lengths, the larger tape steps offer more rigid tapes that will not flop around and slip off the ending of boards. Measuring when you are by yourself will be a lot simpler, and naturally, quality tape steps can endure for many years.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will assist you in marking the right angles in addition to compound angles. Get the number three and two Robertson set. I find the Robertson format works best for most woodworking jobs and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing little mistakes on the way.

Adhesives: Not many glues are made equal. Avoid cheap home brands sold as carpenter’s glue. The expense of adhesive through all your jobs is a minor cost consideration. Therefore, it is sensible to decide on the very best. I have also discovered over time that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Wooden Diy Gifts

The peaceful gratification of woodworking is a wonderful adventure in this era of rushed lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Islamic toys

Many toy companies have tried to introducing Islamic toys to the market place these effort where concentrated on dolls and board games. Most effort of the toy companies where concentrated on the Middle Eastern region, although successful attempt examples such as Fulla, were successfully introduced to a wide variety of the international market .

Until Recently Fitra toys, a company based in Hong Kong has introduced a diversified range of Islamic toys that combines a story book series and variety of Science DIY toys, wooden toys, and Islamic Art and craft.[1][2][3][4]

Video: Woodworking Projects