Woodshop Plans For Beginners | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking when they are after because all the ideas and jobs Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking source.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more difficult to make the ideal choice. There are actually many things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. Those who are only getting started will discover the ideas and projects in Ted’s bundle quite easy. Without doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step by step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to find any project of their choice in this bundle quite readily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who buy it’ll be endorsed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large size. Nonetheless, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking bundle created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that can be found throughout the internet. Ted has done his best to guide them in every possible way he can, through easy to comprehend textual directions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find within. So, it is definitely worth buying!

The Benefits of Woodworking Woodshop Plans For Beginners

Woodworking is 1 hobby that can also be a rewarding career if you love to work with your hands and construct beautiful pieces of furniture from wood. When you learn that the woodworking crafts and become a nice woodworking craftsman, you will have the ability to build all kinds of furniture, (beds, table, and chairs), with ease. After that you can sell your completed woodworking projects and make a handsome profit. Woodshop Plans For Beginners.

It requires time to become skilled at the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you’ll have the ability to build some really wonderful furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living space. It’ll be a subject of conversation when you have friends come over to see. They will ask: How did you create it? Where did you get the woodworking plans? Just how long did it take to finish the job? What kind of wood did you use? What type of tools did you use? Just how on earth did you make such a gorgeous piece of furniture? As you speak about your work, a feeling of pride will come over you and do not be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Woodshop Plans For Beginners

If you are thinking you are too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Woodshop Plans For Beginners.

Start with a concept in mind of what you want to construct then get a excellent woodworking project plan that is geared toward novices. There are numerous small woodworking projects for novices available for sale from online woodworking merchants. Of course, you can begin with as expansive a woodworking program as you pick. However, the odds are if you start out with a small woodworking project initially, you’ll have a better prospect of keyword completing the job.

Your woodworking project plan must incorporate some lists! Length of: woodworking hardware, the amount and variety of wood required, and the essential hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Only buy what you want to complete your immediate or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The beginner needs good woodworking gear, but you can easily break the bank buying a great deal of tools you might not utilize all that frequently. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t overlook the wood glue and a brush to spread the wood glue! Obviously, you’ll need a dry area to work and might need a pair of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools here, but the idea is to purchase the crucial hand and power tools which novices will need. You can always increase your toolbox as you get experience!

Woodshop Plans For Beginners Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines out there. Every month the authors in woodworking publications do a story about how to improve your woodworking craft. When it is showing you the way you can apply an end to a finished project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is buying educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodshop Plans For Beginners

If you’re just beginning and very interested in doing a DIY job for house then, woodworking could be interesting. If you don’t have the right information, instruction, and ability, you might land up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a couple of essential aspects that you should keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you should first have to be very interested in woodworking. Creating something new with your hands is a particular feeling. Don’t start a project if you’re not interested, as this may land you in a terrible location.

2. Think of the main reason for making this woodworking project. Choose the uses of the item you’re making.

3. Consider your abilities and examine the time that you have, until you start with a project.

4. Start projects that you’re able to complete. If you are in the middle of some work, then it’s better not to begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Woodshop Plans For Beginners

If you keep those vital points in your mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much because it takes effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking jobs you want to begin with. As a newcomer, always select a project which has quite a basic build up or a very simple structure. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you find these techniques, you can always proceed into the next level of woodworking projects, like cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less bothersome so you have a better knowledge of working with woods and their resources. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Woodshop Plans For Beginners

Tools are the ways through which you can win the struggle of woodworking. A lot of men and women think that power tools are requires. However, for novices, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things much easy for you. When you purchase a hammer, always check the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available in the marketplace. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them can help you in advance woodworking. You can also purchase keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. However, this isn’t a tool for beginners, but using it might make work simpler for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the job much simple.

8. Other small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed price on woodworking projects. Based on the sort of job you want to finish, pricing can be determined. The simple the job, the less price it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Because of this, it is much better to fix a budget on the resources, then keyword on the project. Buying the fundamental tools will make certain you don’t need to purchase any more material other than the timber ply.

Time and Directions

Directions are among the primary things which each and every beginner should follow. Instructions manual is very simple to comprehend the process, what to do and how to do it. It keyword is a systematic guide for completing the project. Time also plays a significant role in the construction of woodworking jobs. Woodworking projects require time and therefore it’s necessary for a novice to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most indispensable thing keyword that can allow you to reach success is proper preparation. With proper planning and a strategy, it’s likely to achieve success immediately. If you understand the objective of woodworking, the thing you need to construct, the tools you require to possess and the average time you can give daily; then you are ready to go.

Conclusion, Woodshop Plans For Beginners

All these tips and instruction will make the woodworking projects and plans for beginners fast to finish. Always ensure that you have all the vital tools, materials, area ready. Keep the instructions for constructing an item handy. Appropriate strategy and planning can help you to make a fantastic woodworking job for your home.

|

The Benefits of Woodworking Woodshop Plans For Beginners

Folks if you’re trying to find a way to pass time or want an alternative method to make money they usually turn into a hobby that they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be very careful when choosing which job to begin with because there are projects that may be too tough for a newbie. But do not worry about that since we will give you guidelines on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, so before you pick your job you have to know whether you have the available tools to work on such a project. Try not to invest a good deal of cash on buying gear when starting out, purchase more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any gap between the artistic hand as well as the normal hands.

The Benefits of Woodworking Woodshop Plans For Beginners

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking in your home will provide you time to explore different projects and learn a lot of things. That is why it’s important to invest less money when starting out so you can manage to make mistakes and at any time learning about different projects.
It is extremely important you know about different types of wood available for creating jobs. Anticipate carpenters utilize different types of wood quality for decorating pieces, learning which kind of wood that they use will help you prepare the wood you will need for certain jobs you may choose to pursue.
As soon as you know the fundamentals of wood choice and the use of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in creating good jobs to fulfill your wants.

Woodshop Plans For Beginners practice makes perfect so make sure you practice your work daily if possible. Try out a lot of layouts utilizing various tools so you may find the hang of working with the tools. When starting out you can earn a range of errors but with time you will learn how to properly use them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodshop Plans For Beginners

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimal number of gear and equipment. A small home workshop can produce a broad variety of simple projects which will allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s talk about where you’ll do your woodworking, based on the dimensions of your home, you might be able to create a dedicated space to your woodworking tasks. This may be a reserved place on your garage or in your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your very first store. A heated shop detached from your house offers one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably create dust that travels to the living area of your house. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the upper levels of the house. Another benefit of detached workshops would be, clearly, the sound level. You can work without bothering the remainder of the family. A good compromise might be the garage of your home.

This can help minimize the difficulties of dust and noise, however depending on where you live, a keyword garage layout may not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Woodshop Plans For Beginners

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they include more space to function in. Woodshop Plans For Beginners if you can have a dedicated place for a workshop all the better. Floor gear and bench top equipment can stay in position from project to project. If this installation is not impossible, at least attempt to make a chair area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and equipment. In the beginning, set up a seat area where you are able to store and use most of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Add a sturdy shelf beneath the seat to home your hand power tools and a pegboard over the seat to hang other gear. Install a woodworking vice at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodshop Plans For Beginners

The scope of your startup equipment will be largely based on your budget. Whether you have got large financial resources or you’re starting on a shoestring consistently buy quality equipment. If you can afford it, buy your quality tools at the local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional advertisements. You will find plenty of quality lightly used tools out there that belong to individuals who embarked on that 1 molding project around the home or obtained tools as presents which they will never use. You can usually purchase tools for these sellers for less than half the original cost and save even more money if you make a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and possibly travel expenditures. Weigh the benefits of traveling around town to save a couple added bucks on a cheap piece of gear. The extra cost of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum amount of hand equipment yet generated sophisticated and complex pieces. Concentrate on developing your abilities with your startup set of tools and avoid lamenting about the gear you wished you had.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together in the event that you find them uneasy.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this set up I’m shielding my eyes and my ears. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw following the favorite brand name, this may end up being the most versatile instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be employed to build an entire property. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your second job. After choosing the proper saw install a quality blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Start with a hybrid blade. All these have a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t only cut curves. It is perfect for cutting holes in wood also like handle slots. At some point, you’ll want to get a ring saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slip often. This is one annoyance you do not need in your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its potential slot at the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents happen. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The head typically comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce range for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely upgrade to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface area. As you embark on your first few projects you’ll find your palm sander using just a bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll find that this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in timber bits. {Start with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it usually takes the beginner woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a pair of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a set of the longest clamps which you can afford. You can contact them for smaller adhesive jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of your bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer you quick release mechanisms that enabled the user to quickly open and close the limbs without dull handle turning. The wood clamping surfaces in your vice will periodically need replacement. I prefer to utilize soft walnut in my vices which won’t crush or damage many of the various woods that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be one of your most often used tools. Purchase a good quality name brand tape measure with a broad tape usually from the 25-foot selection. Even though in your shop you may not use the tape in these spans, the bigger tape steps offer more rigid tapes that won’t flop around and slip off the ending of planks. Assessing when you are by yourself will be a great deal simpler, and of course, quality tape measures can last for several years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can help you in marking the right angles as well as chemical angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works best for most woodworking projects and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. The cost of glue through all your projects is a little cost consideration. Therefore, it is sensible to go with the very best. I also have discovered over time that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Woodshop Plans For Beginners

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimum investment at the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested hobby and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Video: Woodworking Projects