Woodwork Pieces | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are following because all the ideas and jobs Ted’s source are simple to comprehend and simple. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking source.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more difficult to make the right option. There are actually many things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. Those that are only getting started will discover the thoughts and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; however, they will discover that it’s really easy to follow Ted’s easy step-by-step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to locate any job of their choice within this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who purchase it will be endorsed by a 60-day warranty, so when this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large size. Yet, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the net. Ted has done his very best to guide them in every conceivable way he can, through easy to comprehend textual instructions, clear images and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find inside. Therefore, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and much more woodworking power tools , but the concept is to buy the crucial hand and power tools which beginners will need. You may always increase your toolbox as you gain experience!

Woodwork Pieces Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. However, if you are not certain about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the writers in woodworking magazines do a story about the best way best to increase your woodworking craft. When it is showing you how you can apply an end to a finished job, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

The Benefits of Woodworking Woodwork Pieces

If you are just beginning and very enthusiastic about doing a DIY project for home afterward, woodworking could be interesting. If you do not have the right information, instruction, and skill, you may land up spending more time and money than you originally meant to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects you should keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be very interested in woodworking. Making something new with your own hands is a particular sense. Do not begin a project if you’re not interested, as this may land you at a bad place.

2. Consider the main reason behind making this woodworking project. Decide on the uses of this thing you are making.

3. Consider your skills and analyze the time you have, before you begin with a job.

4. Start projects which you’re able to finish. If you are in the midst of a work, then it is better not to start any project at all.

Finding Woodworking Projects and Plans for Beginners Woodwork Pieces

If you keep those essential points in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs that you want to begin with. As a newcomer, always pick a job that has a very basic build up or a very simple construction. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you can always proceed to the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning jobs should keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodwork Pieces

Tools are the ways through which you can win the struggle of woodworking. A lot of people believe power tools are requires. But for novices, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make things considerably simple for you. When you buy a hammer, constantly assess the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws available in the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them can help you in advance woodworking. You might even purchase keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but using it would make work simpler for you at a subsequent stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills will make the job much easy.

8. Additional small and basic tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking jobs. Dependent on the sort of job that you want to finish, pricing can be determined. The easy the project, the less cost it involves. But at the very beginning buying the tools will be a little hefty. Because of this, it is much better to resolve a budget first on the tools, then keyword on the project. Purchasing the fundamental tools will ensure that you don’t have to buy any more material other than the wood ply.

Time and Directions

Instructions are one of the principal things that each and every beginner should follow. It is like the woodworking Bible. Instructions manual is quite simple to understand the procedure, what to do and the way to do it. Time also has an important part in the construction of woodworking projects. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. But the most indispensable thing keyword which will help you to reach success is proper planning. With appropriate planning and a plan, it is possible to achieve success immediately. If you understand the objective of woodworking, then the thing you want to build, the resources you need in order to possess and the average time you can devote daily; then you are ready to go.

Conclusion, Woodwork Pieces

All these strategies and instruction is likely to make the woodworking projects and strategies for beginners fast to complete. Always ensure that you have all the vital tools, materials, area prepared. Keep the instructions for constructing an item handy. Appropriate strategy and planning will allow you to earn a fantastic woodworking project for your home.

|

How to Become a Master Woodworker From Your Own Home Woodwork Pieces

Folks when trying to find a way to pass time or want an alternative way to generate money they usually turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be quite careful when choosing which project to begin with because you will find projects which may be too tough for a beginner. But don’t worry about that since we are going to give you tips on the ideal way to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you choose your project you have to know if you’ve got the available resources to work on that project. Try not to spend a good deal of money on purchasing equipment when starting out, purchase more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there will be no gap between the artistic hand and the hands.

Finding Woodworking Projects and Plans for Beginners Woodwork Pieces

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking at home will provide you time to explore different projects and find out so many things. That’s why it’s important to invest less money when starting out so you can manage to make mistakes and at any time learning about various projects.
It is very important you know about the different kinds of wood available for creating projects. Anticipate carpenters use different types of wood quality for decorating bits, learning what type of wood they use can help you prepare the wood you will need for certain projects you might want to pursue.
As soon as you understand the fundamentals of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in building good projects to satisfy your needs.

Woodwork Pieces practice makes perfect so be sure you practice your work every day if at all possible. Try out lots of layouts utilizing a variety of tools so you can find the hang of working with the tools. When starting out you may make a number of errors but with time you will find out how to correctly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodwork Pieces

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum number of gear and equipment. A small home workshop can produce a broad array of simple projects that can help you develop your creative and construction skills while rewarding you with artistic and practical wood products which you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will perform your woodworking, Depending on the size of your home, you might have the ability to create a dedicated space to your woodworking activities. This may be a reserved place on your garage or in your cellar. In some cases, a detached shed or outbuilding may be perfect to prepare your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably produce dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air returns found in the cellar draw up dust into the upper levels of the home. Another benefit of detached workshops is, of course, the noise level. It’s possible to work without bothering the rest of the family. A fantastic compromise might be the garage of your home.

This might help minimize the problems of dust and noise, however depending on where you reside, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Woodwork Pieces

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they add more space to work in. Woodwork Pieces if you can have a dedicated spot for a marathon all the better. Floor gear and bench top gear can remain in place from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment can be saved and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. At the beginning, set up a bench area where you can shop and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Add a sturdy shelf beneath the bench to home your hand power tools and a pegboard over the seat to hang other gear. Put in a woodworking at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodwork Pieces

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, buy your quality tools at your local construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative local ads. You will find plenty of quality gently used tools out there that belong to people who stumbled on that 1 molding job around the house or obtained tools as presents which they won’t ever use. You can usually purchase tools for these sellers for less than half the initial price and save even more money should you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and possibly travel expenditures. Weigh the benefits of traveling across town to save a couple extra bucks on a cheap piece of gear. The excess cost of travel and time in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal amount of hand gear yet generated sophisticated and complex bits. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here is a checklist of the useful tools you’ll need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and influence safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. With this set up I’m shielding my eyes and my ears. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this can prove to be the most flexible tool in a start-up workshop. In reality, at the hands of an expert, a power hand saw could be used to construct an entire property. At some point, you are going to want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your next project. After choosing the proper saw install a quality blade. Most saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Start with a hybrid . These possess a balanced enamel count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot just cut curves. It is perfect for cutting holes in wood also like handle slots. At some point, you’re going to want to get a band saw. Bandsaws are much more versatile but a excellent floor unit could be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the street, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not need on your workshop. Buy an range of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning every drill piece to its prospective slot in the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries occur. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more appropriate for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disc and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you’ll find that your palm sander using a bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks with 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll find that this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in concept, these tools allow you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Begin with a standard number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, superior clamps are costly and it usually requires the beginner woodworker a couple of years to collect a detailed set of timber clamps. Begin with a pair of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure is still the same. Get a pair of the longest clamps that you can spend. You may contact them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed at the end of the bench is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the better vices offer rapid release mechanisms that enabled the user to rapidly open and close the limbs without tedious handle rotation. The wood clamping surfaces in your vice will periodically need replacement. I prefer to utilize soft pine in my vices that won’t crush or damage lots of the various forests that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be among the most frequently used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually from the 25-foot range. Although in your store you may not use the tape in these spans, the larger tape steps provide more rigid tapes which will not flop around and slip off the ending of boards. Assessing when you are by yourself will be a lot easier, and naturally, quality tape steps can last for several years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools can assist you in marking the right angles as well as chemical angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover that the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. The expense of adhesive through all your projects is a minor cost consideration. Therefore, it makes sense to go with the best. I have also discovered over time that I receive the best results with both indoor and outdoor projects when I use quality outside grade adhesive. All these resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Woodwork Pieces

The peaceful satisfaction of woodworking is a wonderful experience in this era of rushed lives, smart phones, and time-starved livelihood. With a minimum investment at the most basic tools and equipment, everyone can learn the profitable skills of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking joints

Joinery is a part of woodworking that involves joining together pieces of timber or lumber, to produce more complex items. Some wood joints employ fasteners, bindings, or adhesives, while others use only wood elements. The characteristics of wooden joints - strength, flexibility, toughness, appearance, etc. - derive from the properties of the materials involved and the purpose of the joint. Therefore, different joinery techniques are used to meet differing requirements. For example, the joinery used to construct a house can be different from that used to make puzzle toys, although some concepts overlap.

This must be taken into account when joining wood parts together, otherwise the joint is destined to fail. Gluing boards with the grain running perpendicular to each other is often the reason for split boards, or broken joints. Furniture from the 18th century, while made by master craftsmen, did not take this into account. The result is this masterful work suffers from broken bracket feet, which was often attached with a glue block which ran perpendicular to the base pieces. The glue blocks were fastened with both glue and nails, resulting in unequal expansion and contraction between the pieces. This was also the cause of splitting of wide boards, which were commonly used during that period.

In modern woodworking it is even more critical, as heating and air conditioning cause major changes in the moisture content of the wood. All woodworking joints must take these changes into account, and allow for the resulting movement.[3]

Video: Woodworking Tools