Woodwork Workshop Free Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they’re after because most of the thoughts and jobs Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years researching so he could gather enough material for an extensive package, and he ended up making a truly’complete’ woodworking resource.

Many might still appear unsure if they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more difficult to make the ideal choice. There are in fact lots of things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. People who are only getting started will discover the thoughts and projects in Ted’s package quite easy. No doubt, complicated carpentry is demanded; however, they will find it really easy to follow Ted’s easy step by step instructions. Currently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will be able to locate any project of their choice in this package quite easily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who purchase it will be endorsed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available across the internet. Ted has done his very best to direct them in every possible way he could, through easy to comprehend textual directions, clear images and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s definitely worth buying!

Starting Your First Woodworking Shop Woodwork Workshop Free Plans

Woodworking is 1 hobby that could also be a rewarding profession if you love to work with your hands and build exquisite pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you will have the ability to build all types of furniture, (beds, table, and chairs), effortlessly. After that you can sell your completed woodworking projects and make a handsome profit. Woodwork Workshop Free Plans.

It requires time to become proficient in the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you’ll be able to build some really wonderful furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living space. It will be a topic of conversation when you have friends come over to see. They’ll ask: How did you make it? Where did you get the woodworking programs? How long can it take to finish the job? What kind of wood did you use? What kind of tools did you use? How on earth did you create such a beautiful piece of furniture? As you speak about your work, a feeling of pride will encounter you and do not be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Woodwork Workshop Free Plans

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Woodwork Workshop Free Plans.

Begin with a concept in your mind of what you would like to construct then get a excellent woodworking project plan that is geared toward beginners. There are several small woodworking projects for beginners available for sale from online woodworking merchants. Obviously, you can begin with as expansive a woodworking program as you choose. However, the chances are if you begin using a small woodworking job initially, you’ll have a better prospect of keyword completing the project.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the amount and type of wood needed, and the required hand tools and power tools to finish the project. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools aren’t cheap. The beginner needs good woodworking tools, but you can easily break the bank purchasing a great deal of tools you may not utilize all that frequently. When you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t forget the wood glue and a brush to spread the wood adhesive! Of course, you will require a dry place to work and might require a pair of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools , but the idea is to purchase the crucial hand and power tools that beginners will need. You may always increase your arsenal as you get experience!

Woodwork Workshop Free Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Every month the writers in woodworking magazines do a story about the best way to improve your woodworking craft. When it is showing you how you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is purchasing educational DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Woodwork Workshop Free Plans

If you’re just beginning and very enthusiastic about doing a DIY project for home afterward, woodworking can be fun. If you do not have the right information, education, and ability, you might wind up spending more time and money than you originally intended to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having mentioned, there are a couple of essential aspects that you should keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Making something new with your hands is a special sense. Do not start a job if you’re not interested, as this may land you at a terrible location.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of the thing you are making.

3. Consider your skills and analyze the time that you have, until you start with a job.

4. Start projects which you’re able to finish. If you’re in the midst of some work, then it is better to not start any project at all.

How to Become a Master Woodworker From Your Own Home Woodwork Workshop Free Plans

If you keep those vital things in your mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking projects that you want to begin with. As a newcomer, always select a job which has a very basic construct up or a very simple structure. Some easy to start projects include, bird feeder, chairs, shelves, etc.. As soon as you get hold of the techniques, you can always move into the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning projects should keyword be complicated and less frustrating so you have a better comprehension of working with forests and their resources. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodwork Workshop Free Plans

Tools would be the ways whereby you will win the struggle of woodworking. A lot of people think that power tools are needs. But for beginners, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters much easy for you. When you purchase a hammer, constantly check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available in the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them can help you ahead of time woodworking. You might even purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but using it would make work easier for you in a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills can make the job much simple.

8. Other small and basic tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed cost on woodworking jobs. Dependent on the sort of project you would like to complete, pricing could be determined. The easy the project, the less price it involves. However, at the very beginning purchasing the tools will be somewhat hefty. Therefore, it’s much better to fix a budget first on the resources, then keyword on the project. Purchasing the basic tools will make certain you do not need to buy any more material other than the wood ply.

Time and Directions

Instructions are among the principal things that each and every beginner should follow. Instructions manual is very easy to comprehend the process, what to do and the way to do it. Time also has a significant role in the building of woodworking jobs. Woodworking projects require time and so it is crucial for a novice to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword that will allow you to reach success is proper planning. With proper planning and a plan, it’s possible to achieve success immediately. If you know the objective of woodworking, the item that you need to build, the resources you need to possess and the typical time it’s possible to devote every day; then you are all set to go.

Conclusion, Woodwork Workshop Free Plans

These strategies and instruction is likely to make the woodworking projects and strategies for novices quickly to finish. Always make sure that you have all the essential tools, materials, space ready. Keep the instructions for constructing an item handy. Proper strategy and preparation can allow you to earn a great woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Woodwork Workshop Free Plans

Folks when looking for a way to pass time or want an alternative method to generate money they usually turn to a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you need to be very cautious when choosing which job to begin with because you will find jobs which may be too tough for a newbie. But don’t be concerned about that since we will give you guidelines on the right means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you pick your job you have to know if you’ve got the available resources to work on that project. Try not to spend a good deal of money on buying gear when starting out, purchase more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any difference between the artistic hand and the hands.

Finding Woodworking Projects and Plans for Beginners Woodwork Workshop Free Plans

Woodworking in your home will give you time to research unique jobs and find out so many things. That is why it’s important to spend less money when starting out so you can manage to make errors and at any time learning about various projects.
It’s very important you know about the different types of wood available for creating jobs. Anticipate carpenters use several kinds of wood quality for decorating bits, learning what type of wood that they use will allow you to prepare the wood you’ll need for certain jobs you might want to pursue.
Once you know the basics of wood selection and the use of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in building good jobs to fulfill your needs.

Woodwork Workshop Free Plans practice makes perfect so be sure that you practice your work daily if at all possible. Try out a lot of layouts utilizing a variety of tools so that you can get the hang of using the tools. When starting out you can make a range of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Woodwork Workshop Free Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimum amount of tools and equipment. A small home workshop can produce a broad variety of simple projects that will allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us talk about where you’ll perform your woodworking, based on the size of your house, you might be able to create a dedicated space into your woodworking activities. This may be a reserved spot in your garage or on your cellar. In some cases, a detached shed or outbuilding may be ideal to set up your first shop. A heated shop detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns located in the basement draw up dust into the top levels of the house. Another benefit of detached workshops is, of course, the noise level. You can work without disturbing the remainder of the household. A fantastic compromise could be the garage of your home.

This might help minimize the difficulties of dust and sound, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodwork Workshop Free Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they include more space to work in. Woodwork Workshop Free Plans if you’re able to have a dedicated place for a workshop all the greater. Floor gear and bench top equipment can stay in position from project to project. If this setup isn’t impossible, at least attempt to create a bench area where equipment can be stored and pulled out as needed. If possible plan for inevitable growth as you get more tools and equipment. In the start, establish a seat area where you are able to shop and use most of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. Insert a sturdy shelf beneath the seat to house your hand power tools along with a pegboard over the seat to hang additional equipment. Put in a woodworking vice at one end of the bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodwork Workshop Free Plans

The reach of your startup equipment will be largely based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools at the local building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative local advertisements. There are an abundance of quality gently used programs out there that belong to individuals who embarked on that 1 molding project around the home or obtained tools as presents that they will never utilize. You can usually purchase tools for all these sellers for less than half of the original price and save even more money should you create a bundle deal for all their unused equipment. Obviously, getting tools from private people will take additional time and perhaps travel expenditures. Weigh the advantages of traveling around town to save a couple extra dollars on a cheap piece of gear. The extra cost of time and travel in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand gear yet generated sophisticated and complex bits. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here’s a listing of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection for your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and influence security. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together if you find them uneasy.

The next piece of critical safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. With this setup I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw after the favorite name, this may end up being the most flexible instrument in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be employed to build an whole property. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your next project. After selecting the proper saw put in a quality blade. Most saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut corners. It’s perfect for cutting holes in wood also like manage slots. At some point, you’re going to want to get a band saw. Bandsaws are even more versatile but a quality floor unit can be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you do not want in your workshop. Buy an range of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning each drill piece to its prospective slot in the holder after each use. Lastly, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Even though the most ordinary, hammer injuries are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage just about any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you will probably update to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you might discover that your palm sander using just a little bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough boards with 100 grit paper and after finish your work with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in concept, these tools allow you to taper edges, sew high stains and fix any imperfections in timber pieces. {Begin with a standard amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it normally requires the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Get a pair of the longest clamps that you could afford. You may contact them for smaller adhesive jobs and expand them to their entire length for larger jobs.

Shop Vice: A store vice installed in the end of the seat is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enabled the consumer to quickly open and close the jaws without tedious handle turning. The timber clamping surfaces in your vice will periodically require replacement. I prefer to utilize soft walnut in my vices which will not crush or damage lots of the different woods that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among your most frequently used tools. Purchase a good excellent name brand tape measure with a broad tape usually from the 25-foot range. Even though in your shop you may not use the tape at these spans, the larger tape measures offer more rigid tapes that will not flop around and slip off the end of boards. Measuring when you’re on your own will be a lot simpler, and of course, quality tape measures can endure for many years.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will help you in marking the ideal angles as well as chemical angles. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and repairing little mistakes along the way.

Adhesives: Not all glues are created equal. Avoid inexpensive house brands sold as carpenter’s glue. The cost of glue through all of your projects is a minor cost consideration. For that reason, it is sensible to decide on the best. I also have found over time that I get the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Woodwork Workshop Free Plans

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of hurried lives, smartphones, and time-starved careers. With a minimal investment in the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Shaving horse

A shaving horse (shave horse, or shaving bench[1]) is a combination of vice and workbench, used for green woodworking. Typical usage of the shaving horse is to create a round profile along a square piece, such as for a chair leg or to prepare a workpiece for the pole lathe. They are used in crafts such as coopering and bowyery.

The shavehorse is commonly used as the preparation of stock prior to turning in a lathe, to roughly form cylindrical billets, the intermediate dressing phase between a crudely dressed raw split log and the final lathe work.

As the name "horse" suggests, the worker sits astride the shaving horse. The clamp is operated by the operator pressing their feet onto a treadle bar below. A foot-actuated clamp holds the work piece securely against pulling forces, especially as when shaped with a drawknife or spokeshave.[2][3][4]

Video: Woodworking Tools