Woodworkers Guild Near Me | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they’re following because all the thoughts and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up making a really’complete’ woodworking source.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it even more difficult to make the right choice. There are in fact many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. People that are only getting started will find the thoughts and projects in Ted’s package quite easy. Without doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s simple step-by-step directions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will be able to find any project of their choice within this package quite readily, though there so many options.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who buy it will be backed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large size. Yet, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that can be found throughout the internet. Ted has done his best to guide them in every conceivable way he can, through simple to comprehend textual instructions, clear pictures and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find within. So, it is certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Woodworkers Guild Near Me

Woodworking is 1 hobby that can also be a rewarding profession if you love to work with your hands and build beautiful pieces of furniture from wood. When you learn that the woodworking crafts and become a fine woodworking craftsman, you’ll have the ability to build all types of furniture, (beds, table, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. Woodworkers Guild Near Me.

It takes time to become proficient in the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you will have the ability to build some really wonderful furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living room. It will be a topic of conversation whenever you have friends come over to visit. They will ask: How can you create it? Where did you get the woodworking plans? Just how long can it take to finish the job? What type of wood did you use? What type of tools did you use? How on earth did you create such a gorgeous item of furniture? As you discuss your work, a feeling of pride will come over you and also don’t be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Woodworkers Guild Near Me

If you are thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to Begin in Woodworking? Woodworkers Guild Near Me.

Start with an idea in mind of what you want to construct then get a really good woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for novices available for sale from online woodworking merchants. Obviously, you can start out with as expansive a woodworking plan as you choose. However, the chances are if you begin with a small woodworking job initially, you will have a better prospect of keyword completing the project.

Your woodworking project plan should include some lists! Length of: woodworking equipment, the amount and type of wood needed, and the required hand tools and power tools to finish the project. Note: A word of warning about buying woodworking tools. Just buy what you want to finish your instant or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a great deal of tools you might not use all that often. If you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget the wood glue and a brush to spread the wood adhesive! Obviously, you will need a dry area to work and might require a pair of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more woodworking hand tools and more woodworking power tools here, but the idea is to buy the essential hand and power tools which beginners will need. You can always increase your toolbox as you get experience!

Woodworkers Guild Near Me Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. However, if you’re not certain about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Each month the authors in woodworking magazines do a story about the best way to increase your woodworking craft. When it’s showing you how you can apply a finish to a completed job, or how to make a mortise and tenon joint, something new can be heard every month. Next, is purchasing educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Woodworkers Guild Near Me

If you are a beginner and very enthusiastic about doing a DIY job for house afterward, woodworking can be fun. If you do not have the right information, instruction, and skill, you may land up spending more time and money than you initially intended to spend. As a novice woodworker, you want to have time and the appropriate tools. Having said, there are a few essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you should first need to be very interested in woodworking. Creating something new with your hands is a special sense. Don’t begin a project if you are not interested, as this may land you at a bad place.

2. Think of the main reason for creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and analyze the time you have, until you begin with a job.

4. Start projects which you can finish. If you are in the middle of some work, then it is better to not start any project at all.

Finding Woodworking Projects and Plans for Beginners Woodworkers Guild Near Me

If you maintain those essential points in mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects that you wish to start with. As a beginner, always pick a project which has quite a basic construct up or a simple construction. Some easy to start projects comprise, bird feeder, benches, shelves, etc.. The moment you find the techniques, you could always move into the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning jobs should keyword be less complicated and less frustrating so you have a better comprehension of working with woods and their resources. Once the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Woodworkers Guild Near Me

Tools are the means through which you can win the struggle of woodworking. A lot of men and women think that power tools are requires. However, for novices, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things much simple for you. When you purchase a hammer, always check the balance between the weight and endure. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws available in the marketplace. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Having all of them can help you ahead of time woodworking. You might even buy keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but having it would make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed cost on woodworking projects. Dependent on the type of job you would like to complete, pricing could be set. The easy the job, the less price it involves. But at the beginning purchasing the tools will be somewhat hefty. Therefore, it’s much better to resolve a budget on the tools, then keyword on the undertaking. Purchasing the basic tools will ensure that you do not have to purchase any more material other than the timber ply.

Time and Directions

Instructions are among the principal things which each and every beginner should follow. Instructions manual is quite easy to comprehend the process, what to do and the way to get it done. It keyword is a systematic manual for finishing the project. Time also plays an important role in the building of woodworking projects. Woodworking projects demand time and therefore it is necessary for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword that can allow you to achieve success is proper preparation. With appropriate planning and a plan, it is possible to achieve success quickly. If you know the objective of woodworking, the thing you want to build, the resources you need in order to own and the average time it’s possible to devote daily; then you’re all set to go.

Conclusion, Woodworkers Guild Near Me

These tips and instruction is likely to create the woodworking projects and strategies for novices quickly to complete. Always ensure that you have all of the vital tools, materials, area ready. Read the instructions for building a product handy. Appropriate strategy and preparation can help you to earn a fantastic woodworking job for your property.

|

Starting Your First Woodworking Shop Woodworkers Guild Near Me

People if you’re trying to find a way to pass time or want an alternative method to make money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you have to be quite cautious when choosing which job to begin with because there are jobs that can be too tough for a beginner. But do not be concerned about that because we are going to provide you guidelines on the ideal means to start woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you pick your job you need to know whether you’ve got the available resources to work on that job. Try not to invest a lot of money on buying equipment when starting out, buy more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any difference between the artistic hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Woodworkers Guild Near Me

Woodworking in your home will provide you time to research unique projects and learn a lot of things. That’s why it’s very important to invest less money when starting out so that you can afford to make errors and at any time learning about different jobs.
It is extremely important you know about the different types of wood available for making jobs. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning which type of wood that they use will help you prepare the wood you will need for certain projects you may choose to pursue.
Once you know the basics of wood selection and the use of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to fulfill your needs.

Woodworkers Guild Near Me practice makes perfect so be sure you practice your work daily if at all possible. Try out lots of designs utilizing a variety of tools so that you may find the hang of working with the tools. When starting out you can make a range of errors but with time you will learn how to properly use them and create quality projects.

|

Starting Your First Woodworking Shop Woodworkers Guild Near Me

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimum number of tools and equipment. A small home workshop can generate a broad array of simple projects which will help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s talk about where you will perform your woodworking, Depending on the size of your home, you might be able to produce a dedicated space into your woodworking activities. This might be a reserved spot on your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to prepare your very first store. A heated store detached from your house offers one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns found in the cellar draw up dust into the top levels of the house. Another benefit of detached workshops is, clearly, the noise level. You can work without disturbing the rest of the family. A fantastic compromise might be the garage of your property.

This can help minimize the problems of dust and sound, however based on where you live, a keyword garage layout might not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworkers Guild Near Me

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they include more space to work in. Woodworkers Guild Near Me if you can have a dedicated place for a workshop all the greater. Floor gear and bench top gear can stay in place from project to project. If this installation is not hopeless, at least attempt to create a bench area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and gear. At the start, set up a bench area where you are able to store and use the majority of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf beneath the seat to home your hands power tools and a pegboard above the bench to hang additional equipment. Install a woodworking vice at one end of your bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworkers Guild Near Me

The reach of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools at your local building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other local advertisements. You will find plenty of quality gently used tools out there which belong to people who embarked on that one molding job around the home or received tools as presents that they won’t ever use. You can usually buy tools for these sellers for less than half of the original price and save even more money should you make a bundle deal for all their unused equipment. Of course, getting tools from private people will take additional time and possibly travel expenditures. Weigh the advantages of traveling around town to save a couple added dollars on a inexpensive piece of gear. The extra cost of time and travel in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal amount of hand gear yet generated sophisticated and complex pieces. Concentrate on developing your skills with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence safety. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uneasy.

The next piece of critical safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw following the popular name, this can end up being the most flexible tool in a startup workshop. In reality, at the hands of a professional, a power hand saw can be employed to build an entire property. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your second job. After selecting the right saw install a quality blade. Most skill saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and install an excellent blade with carbide teeth. Begin with a hybrid blade. All these have a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut curves. It’s ideal for cutting holes in timber also like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you do not need in your workshop. Purchase an range of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning every drill bit to its potential slot at the holder after each use. Lastly, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries occur. Although the most frequent, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The head usually comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor version disc and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you’ll find your palm sander using a little bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll get this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in wood pieces. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a few years to accumulate a detailed set of wood clamps. Start with a set of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure remains the same. Receive a pair of the longest clamps which you could spend. You may contact them for smaller glue jobs and expand them to their full length for bigger jobs.

Shop Vice: A shop vice installed at the end of the seat is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the limbs with no tedious handle turning. The timber clamping surfaces in your vice will periodically require replacement. I would rather utilize soft walnut in my vices that won’t crush or damage lots of the various woods that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among the most often used tools. Purchase a good quality name brand tape measure with a broad tape usually from the 25-foot selection. Although in your shop you might not be using the tape at these spans, the bigger tape measures offer more rigid tapes which will not flop around and slip off the ending of planks. Measuring when you’re by yourself will be a great deal simpler, and naturally, quality tape measures can endure for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can help you in marking the right angles as well as compound angles. Get the number three and two Robertson set. I discover the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes along the way.

Adhesives: Not many glues are made equal. Avoid inexpensive home brands sold as carpenter’s glue. The expense of glue through all your jobs is a minor cost consideration. Therefore, it is sensible to decide on the best. I also have found over time that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Woodworkers Guild Near Me

The peaceful gratification of woodworking is a wonderful adventure in this era of rushed lives, smartphones, and time-starved livelihood. With a minimal investment in the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested avocation and revel in job after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Paul Sellers

Paul Sellers (born 1950) is a British woodworker, writer and teacher. He was apprenticed as a woodworker in the UK in 1965 at the age of 15.[1] He moved to the US in 1984 and quickly became noted for his ability in traditional woodworking. He has and continues to teach people the craft of woodworking. He has designed and made cabinets for the White House.[2] He started the New Legacy School of Woodworking that provides short courses.[3] Sellers is author of Working Wood which was published in 2011 and Essential Woodworking Hand Tools which was published in 2016. He then moved to premises at the Sylva Wood Centre in Long Wittenham, near Abingdon in Oxfordshire.[4] Recently Paul moved to larger premises in an industrial unit in Abingdon, Oxfordshire.

Paul has established a considerable worldwide presence and following on YouTube, where he shares his long experience of woodworking with hand tools, with current and future generations. He recognised that he is one of the last people to experience a formal English woodworking apprenticeship using hand-tools and has worked tirelessly to preserve as much of that rapidly disappearing knowledge and experience as he can. He does so without sponsorship from tool makers, which might compromise his impartiality and credibility. He presents an approach to woodworking that is deliberately both inclusive and affordable, favouring restoring good quality, common, affordable, long lasting, old tools rather than promoting expensive premium new tools or inferior, modern "knock offs" (copies) or expensive specialist tools. His no-nonsense insights and advice carry the credibility of his 50 plus years as a Master Craftsman woodworker, working in the UK and USA.

Paul has created a veritable library of YouTube videos with his son, Joseph, and team. As well as a supporting website and blog. Notable episodes include several on saw sharpening from beginner to advanced, chisel preparation, a comparison/demonstration of modern bevel-edged chisels and vintage "pig-sticker" mortice chisels, "rag-in-a-can oiler", restoring planes, setting up planes, setting up and using old wooden planes and series such as building your own workbench/stool/toolchest and his series of videos showing how to make "Poor man's" versions of various tools. He has provided the inspiration and instruction for a diverse new generation of woodworkers, of all ages, both amateur and professional. Paul has mentioned in various contexts that he considers himself an amateur in the sense that he does this for the love of the craft, it is more than a profession to him, it is his life style and his life. He is creating a woodworking knowledge base legacy for all.

Video: Woodworking Tools