Woodworkers Hardware | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those attributes alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they’re after because all the ideas and jobs Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still appear unsure if they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are actually lots of things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. People that are only getting started will discover the thoughts and projects in Ted’s package quite simple. Without doubt, complicated carpentry is involved; however, they will find it really simple to follow Ted’s simple step by step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will be able to find any job of their choice within this package quite readily, even though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who buy it’ll be endorsed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Yet, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the internet. Ted has done his best to guide them in every conceivable way he can, through simple to comprehend textual instructions, clear pictures and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s definitely worth buying!

How to Become a Master Woodworker From Your Own Home Woodworkers Hardware

Woodworking is one hobby that can also be a rewarding career if you like to work together with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to construct all types of furniture, (table, beds, and chairs), effortlessly. After that you can sell your finished woodworking jobs and make a handsome profit. Woodworkers Hardware.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to this expert craftsman degree is you’ll be able to create some really wonderful furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It’ll be a topic of conversation whenever you have friends come over to see. They will ask: How did you make it? Just how long can it take to complete the job? What type of wood did you use? What kind of tools did you use? Just how on earth did you create such a gorgeous item of furniture? As you discuss your work, a feeling of pride will come over you and do not be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Woodworkers Hardware

If you’re thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Woodworkers Hardware.

Begin with an idea in mind of what you would like to build and then get a excellent woodworking project plan that’s geared toward novices. There are several small woodworking projects for beginners available for sale from online woodworking merchants. Obviously, you can start out with as grand a woodworking plan as you pick. On the other hand, the odds are if you begin using a little woodworking project at first, you’ll get a better prospect of keyword completing the project.

Your woodworking project plan should incorporate some lists! Lists of: woodworking equipment, the amount and variety of wood required, and the essential hand tools and power tools to complete the undertaking. Note: A word of caution about buying woodworking tools. Only buy what you want to finish your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking tools, but you can easily break the bank purchasing a great deal of tools you may not use all that often. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not overlook that the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry place to work and might require a pair of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and more woodworking power tools , but the idea is to purchase the essential hand and power tools that beginners will need. You can always add to your toolbox as you gain experience!

Woodworkers Hardware Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Every month the authors in woodworking publications do a story about how best to increase your woodworking craft. When it is showing you how to apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

The Benefits of Woodworking Woodworkers Hardware

If you’re a beginner and very enthusiastic about doing a DIY job for home then, woodworking could be interesting. If you don’t have the right information, instruction, and skill, you may land up spending more time and money than you initially meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having said, there are a couple of essential aspects you should remember, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Making something new with your hands is a particular sense. Don’t begin a job if you’re not interested, as this may land you in a terrible location.

2. Consider the main reason for making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and examine the time that you have, before you start with a project.

4. Start projects which you’re able to complete. If you are in the midst of some work, then it’s better to not start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworkers Hardware

If you maintain those vital points in your mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you want to start with. As a newcomer, always pick a project which has a very basic construct up or a very simple structure. A few simple to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you get hold of the techniques, you could always move to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should keyword be less complicated and less bothersome so that you have a better knowledge of working with woods and their resources. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Woodworkers Hardware

Tools are the means through which you will win the struggle of woodworking. Many men and women think that power tools are needs. But for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when mended with vises, provide ample space to work. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much easy for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws available on the marketplace. Choose a size that you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You can even purchase keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it would make work simpler for you at a later stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills will make the job much simple.

8. Other small and basic tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed cost on woodworking jobs. Dependent on the sort of job that you want to finish, pricing can be set. The easy the job, the less price it involves. But at the very beginning buying the tools will be a little hefty. Therefore, it’s better to fix a budget first on the resources, then keyword on the project. Buying the basic tools will ensure that you do not have to buy any more material aside from the wood ply.

Time and Directions

Directions are one of the primary things which each and every newcomer should follow. It is like the woodworking Bible. Instructions manual is quite easy to understand the procedure, what to do and the way to get it done. Time also plays a significant role in the construction of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that can help you to reach success is proper preparation. With proper planning and a strategy, it’s likely to achieve success immediately. If you know the purpose of woodworking, the thing that you need to construct, the tools you need in order to own and the average time you can devote daily; then you are all set to go.

Conclusion, Woodworkers Hardware

All these tips and instruction will create the woodworking projects and strategies for beginners fast to finish. Always ensure you have all the essential tools, materials, space prepared. Read the instructions for constructing an item handy. Appropriate strategy and planning can allow you to earn a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Woodworkers Hardware

People when looking for a way to pass time or desire an alternative method to generate money they usually turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you need to be quite cautious when choosing which project to start out with because there are jobs that may be too tough for a newbie. But do not worry about that since we are going to give you guidelines on the ideal way to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your job you have to know if you have the available tools to work on that project. Try not to spend a lot of cash on purchasing gear when starting out, purchase more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Woodworkers Hardware

Woodworking at home will give you time to explore unique jobs and learn a lot of things. That is why it’s very important to invest less money when starting out so that you can afford to make mistakes and at any time learning about different jobs.
It’s extremely important you know about different kinds of wood available for creating jobs. Expect carpenters utilize different kinds of wood quality for decorating bits, learning what kind of wood that they use can allow you to prepare the wood you will need for certain jobs you may choose to pursue.
Once you understand the basics of wood choice and the usage of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in building good projects to satisfy your needs.

Woodworkers Hardware practice makes perfect so be sure you practice your work every day if possible. Try out lots of designs using various tools so that you can get the hang of using the tools. When starting out you may make a range of errors but with time you will find out how to correctly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworkers Hardware

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimum amount of gear and equipment. A little home workshop can produce a wide array of simple projects which can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products which you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let’s discuss where you will do your woodworking, based on the size of your home, you might have the ability to produce a dedicated space into your woodworking activities. This may be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated store detached from your house offers one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops is, clearly, the sound level. You can work without bothering the rest of the family. A fantastic compromise could be the garage of your home.

This might help decrease the difficulties of dust and sound, however based on where you reside, a keyword garage workshop might not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworkers Hardware

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to function in. Woodworkers Hardware if you’re able to have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can stay in position from project to project. If this setup isn’t impossible, at least try to make a chair area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. In the start, set up a seat area where you can shop and use most of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Add a sturdy shelf beneath the seat to house your hand power tools along with a pegboard over the bench to hang other gear. Install a woodworking at one end of your seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworkers Hardware

The scope of your start-up equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, purchase your quality tools at the local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative local ads. There are plenty of quality gently used programs out there which belong to individuals who embarked on that 1 molding job around the home or received tools as gifts that they won’t ever utilize. You can usually buy tools for these sellers for less than half the initial price and save even more money should you make a package deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and possibly travel expenses. Weigh out the benefits of traveling around town to save a couple extra bucks on a cheap piece of equipment. The extra expense of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal quantity of hand equipment yet produced sophisticated and intricate bits. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw after the favorite name, this may prove to be the most versatile tool in a startup workshop. In fact, in the hands of an expert, a power hand saw can be employed to construct an whole house. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you start your second job. After selecting the right saw put in a quality blade. Most skill saws include a starter blade of lesser quality even if they are a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid blade. All these have a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot only cut corners. It’s perfect for cutting holes in timber also like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are even more flexible but a quality floor unit could be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the standard 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want in your workshop. Purchase an range of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning every drill bit to its potential slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Although the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The head usually comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce range for overall work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you’ll discover your palm sander with just a bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll find that this grade of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in wood pieces. {Begin with a typical number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a few years to accumulate a comprehensive set of wood clamps. Begin with a pair of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the maximum clamps which you could spend. You can contact them for smaller adhesive jobs and enlarge them to their full length for bigger projects.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the greater vices offer quick release mechanisms that enable the consumer to rapidly open and close the limbs without dull handle rotation. The wood beamed surfaces in your vice will periodically need replacement. I prefer to utilize soft walnut in my vices that will not crush or damage lots of the various woods that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most frequently used tools. Purchase a fantastic excellent name brand tape measure with a wide tape usually from the 25-foot selection. Although in your store you may not be using the tape in these lengths, the bigger tape steps provide more rigid tapes which will not flop around and slide off the end of planks. Assessing when you’re on your own will be a lot simpler, and of course, quality tape steps can last for several decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Woodworkers Hardware

Woodworking is known as the construction or the production of items out of wood. You can produce a great deal of unique objects from woodworking and these objects can be as large as gazebos or as small as wooden toys. However large or small your personal project maybe you will be quite likely to do that aim with woodworking. In addition, woodworking has lots of personal as well as emotional benefits! In this guide, I will briefly identify some of these benefits for you.

Woodworking as a Career:

Individuals who build things out of wood are generally known keyword because carpenters. Carpenters can operate on a number of woodworking jobs and job types. For example, a few carpenters own their carpentry company and these folks have the luxury to set their job hours. This advantage allows carpenters the chance to spend additional time with their families and also have less job stress. Raising children is a really difficult task no matter what way you approach the task! To get a carpenter who owns their own company, this task may not be as hard since that person will have more time to become part of her or his child’s life. By playing a bigger part in the life of your child you’ll be having a greater impact on the sort of character that kid develops into, which is a huge concern for any loving parent. Besides such advantages, carpentry may also have health benefits too.

How to Become a Master Woodworker From Your Own Home Woodworkers Hardware

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood round a whole lot. This results in more physical activity, which leads to better physical health. Maintaining your body physically fit is vital and keyword will help prevent the occurrence of various ailments in the foreseeable future life. By being physically healthy you can reduce chances you will have a heart attack, have seizures, turned into a diabetic, and lower the odds of having a range of other illnesses.

Woodworkers Hardware, Do It Yourself Woodworking Saves Cash:

I feel as that I paid way too much when I go to home improvement shops and purchase patio furniture, and I am certain that I’m not the only person that has felt like this! A successful business owner once told me to always raise the sales price of a product to double everything you got it for. In this manner, you can always reduce the merchandise to 50 percent off and come out without acquiring any losses. This sounds like it may be exactly the same tactic that home improvement stores use in selling their wooden furniture products. Regardless, there’s a way which it is possible to get around paying the extra cash and that’s to do with building it yourself. Luckily, there are some really excellent woodworking products offering thousands of detailed woodworking keyword strategies for hundreds of different project types. Thus, you really can build anything you need or see in any home improvement store. Doing something does require a bit of time but the time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Lee Valley Tools

The company is family-owned. The founder, Leonard Lee, was a recipient of the Order of Canada. He founded the company in 1978, in Ottawa, Ontario. Over the next ten years, the company opened several more stores (Toronto, Vancouver) and started manufacturing its own line of tools (starting with the Veritas Dovetail Marker in 1982). Since then, it has continued opening stores, manufacturing more diverse tools, and selling through mail order and the Internet. In 1998, Canica Design was launched. Canica is a medical design company associated with Lee Valley Tools[1] which arose out of consultations between Leonard Lee and surgeon Michael Bell after Lee found that Bell was using Lee Valley tools in his plastic surgery practice.

Lee Valley Tools is notable for enforcing and codifying the concept of “pay slope”[2] limiting the pay at the highest levels in the company based on what the lowest paid employees earn. They earned a slot in the Forbes Top 500 Employers list in 2018.[3]

The primary business is mail-order and retail, purveying mainly woodworking and gardening tools and equipment, as well as woodworking hardware and gifts. The consumer part of the business runs under the main company name, Lee Valley Tools.

Video: Woodworking Tools