Woodworkers Project | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they’re following because all the thoughts and jobs Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive package, and he ended up creating a truly’complete’ woodworking source.

Many might still seem unsure if they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are actually lots of things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. Those who are just getting started will discover the ideas and projects in Ted’s package quite easy. Without doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s simple step by step directions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any job of their choice within this package quite easily, even though there so many options.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who buy it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down due to its large size. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be considering constructing.

This woodworking bundle created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking packages that are available across the net. Ted has done his very best to guide them in every conceivable way he could, through easy to comprehend textual directions, clear images and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find within. Therefore, it is certainly worth buying!

Finding Woodworking Projects and Plans for Beginners Woodworkers Project

Woodworking is 1 hobby that can also be a rewarding profession if you like to work together with your hands and construct beautiful pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you will have the ability to build all kinds of furniture, (beds, table, and chairs), with ease. After that you can sell your completed woodworking jobs and make a handsome profit. Woodworkers Project.

It requires time to become skilled at the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you’ll have the ability to create some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living room. It’ll be a subject of conversation when you have friends come over to visit. They will ask: How did you create it? How long can it take to finish the project? What type of tools did you use? How on earth did you create such a beautiful item of furniture? As you speak about your job, a feeling of pride will come over you and do not be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Woodworkers Project

If you’re thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to begin in Woodworking? Woodworkers Project.

Begin with an idea in mind of what you would like to build and then get a excellent woodworking project plan that is geared toward novices. There are numerous little woodworking projects for novices available for purchase from online woodworking merchants. Obviously, you can begin with as grand a woodworking program as you choose. However, the odds are if you start out using a small woodworking job initially, you will have a better chance of keyword completing the job.

Your woodworking project plan should include some lists! Lists of: woodworking equipment, the quantity and type of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you need to complete your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The beginner needs good woodworking tools, but it is simple to break the bank buying a great deal of tools you may not utilize all that often. If you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not forget that the wood glue and a brush to spread the wood adhesive! Of course, you’ll require a dry area to work and might need a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which beginners will need. You can always increase your arsenal as you get experience!

Woodworkers Project Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. However, if you are unsure about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Every month the authors in woodworking publications do a story about the best way best to increase your woodworking craft. Whether it’s showing you the way to apply an end to a finished project, or how to create a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Woodworkers Project

If you are just beginning and very enthusiastic about doing a DIY project for home then, woodworking can be fun. If you do not have the proper information, instruction, and ability, you might wind up spending more money and time than you initially intended to spend. As a novice woodworker, you need to have time and the appropriate tools. Having said, there are a couple of essential factors that you should remember, before starting with any woodworking project.

1. If you’re just beginning, you should first have to be somewhat interested in woodworking. Creating something new with your hands is a special feeling. Do not begin a job if you’re not interested, as this may land you in a bad location.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of this item you’re making.

3. Consider your skills and analyze the time that you have, before you start with a job.

4. Start projects which you’re able to complete. If you’re in the middle of a work, then it is wise not to start any project in any way.

Finding Woodworking Projects and Plans for Beginners Woodworkers Project

If you maintain those essential points in your mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects you wish to begin with. As a newcomer, always select a project which has quite a basic construct up or a simple construction. A few simple to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always proceed to the next level of woodworking projects, like cabinets, sheds, and others. Beginning jobs should always keyword be complicated and less frustrating so you have a better comprehension of working with forests and their resources. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Woodworkers Project

Tools would be the ways whereby you can win the struggle of woodworking. A lot of people think that power tools are needs. However, for beginners, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you buy a hammer, always check the balance between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws out there in the marketplace. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them will help you ahead of time woodworking. You can even buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. However, this is not a tool for novices, but having it would make work easier for you in a later stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the task much simple.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed cost on woodworking projects. Based on the type of project you want to complete, pricing could be set. The easy the project, the less cost it involves. But at the beginning purchasing the tools will probably be a little hefty. Therefore, it is much better to resolve a budget on the resources, then keyword on the undertaking. Buying the fundamental tools will make certain you do not have to buy any more material other than the wood ply.

Time and Instructions

Instructions are among the primary things that each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is quite easy to comprehend the procedure, what to do and the way to get it done. Time also has an important part in the construction of woodworking projects. Woodworking projects demand time and therefore it’s necessary for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most indispensable thing keyword that will allow you to achieve success is proper planning. With proper planning and a strategy, it’s likely to achieve success immediately. If you understand the objective of woodworking, then the thing that you need to construct, the resources you require in order to own and the typical time you can devote daily; then you’re all set to go.

Conclusion, Woodworkers Project

These strategies and education is likely to make the woodworking projects and plans for beginners quickly to finish. Always make sure that you have all the vital tools, materials, space ready. Keep the instructions for building an item handy. Appropriate strategy and preparation can help you to earn a great woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Woodworkers Project

Folks when looking for a way to pass time or desire an alternate method to generate money they generally turn into a hobby they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be quite careful when choosing which project to start out with since there are projects which may be too tough for a beginner. But do not be concerned about that because we will provide you guidelines on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, so before you pick your project you need to be aware of whether you have the available tools to work on such a project. Try not to spend a good deal of money on purchasing gear when starting out, buy more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the hand and the hands.

The Benefits of Woodworking Woodworkers Project

To keep yourself updated you must disseminate with different brands tools and woods. Woodworking at home will provide you time to explore different projects and find out so many things. That is why it’s very important to spend less money when starting out so you can manage to make errors and at some time learning about various projects.
It is very important you know more about the different kinds of wood available for making projects. Anticipate carpenters use several kinds of wood quality for decorating pieces, learning which type of wood they use can allow you to prepare the wood you will need for certain jobs you might choose to pursue.
Once you understand the fundamentals of wood selection and the use of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in creating good jobs to fulfill your needs.

Woodworkers Project practice makes perfect so make sure that you practice your work daily if at all possible. Try out lots of layouts using various tools so that you can find the hang of working with the tools. When starting out you can make a number of errors but with time you will learn how to correctly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworkers Project

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimal number of gear and equipment. A little home workshop can generate a wide variety of simple projects which will help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us discuss where you will do your woodworking, based on the size of your home, you may have the ability to create a dedicated space into your woodworking tasks. This may be a reserved spot on your garage or on your cellar. In some cases, a detached shed or outbuilding might be ideal to prepare your first shop. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields found in the basement draw dust up into the top levels of the house. Another benefit of detached workshops would be, of course, the sound level. You can work without disturbing the remainder of the family. A good compromise might be the garage of your home.

This might help minimize the problems of dust and noise, however depending on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Woodworkers Project

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Woodworkers Project if you can have a dedicated spot for a marathon all the greater. Floor tools and bench top gear can stay in position from project to project. If this setup isn’t hopeless, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and equipment. At the beginning, set up a bench area where you can store and use most of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Add a sturdy shelf below the bench to home your hands power tools along with a pegboard above the seat to hang other gear. Install a woodworking vice at one end of the seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworkers Project

The reach of your start-up equipment will be largely based on your financial plan. Whether you have got large financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, purchase your quality tools in the regional construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other regional advertisements. There are plenty of quality gently used tools out there which belong to people who embarked on that 1 molding job around the home or obtained tools as presents which they won’t ever utilize. You can usually purchase tools for all these sellers for less than half the original price and save even more money if you make a package deal for all their unused equipment. Obviously, getting tools from private people will take additional time and possibly travel expenses. Weigh the benefits of traveling around town to save a couple extra dollars on a cheap piece of equipment. The extra expense of time and travel in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum quantity of hand equipment yet produced sophisticated and intricate bits. Focus on developing your skills with your startup set of tools and avoid lamenting about the equipment you wished you had.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uncomfortable.

The next bit of critical safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire quicker when exposed to elevated noise levels. Select powerful hearing protection that you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. I prefer a very simple ball cap with my ear muffs and eye protection. With this setup I’m shielding my eyes and my ears. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw following the popular brand name, this may end up being the most versatile instrument in a startup workshop. In fact, at the hands of an expert, a power hand saw could be employed to build an whole house. Eventually, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you even start your next job. After choosing the right saw put in a quality blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid . All these have a balanced enamel count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument cannot only cut corners. It’s ideal for cutting holes in timber also like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you do not need in your workshop. Buy an range of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill bit to its prospective slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents happen. Although the most frequent, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce range for general work and a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more appropriate for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely upgrade to a floor version disc and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you’ll discover your palm sander using a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough planks with 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll get this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and fix any imperfections in timber bits. {Begin with a typical number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a few years to collect a comprehensive set of timber clamps. Start with a set of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure is still the same. Receive a pair of the longest clamps which you can spend. You may get in touch with them for smaller glue jobs and expand them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of the bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enable the consumer to rapidly open and close the jaws without dull handle rotation. The timber clamping surfaces on your vice will occasionally need replacement. I would rather use soft walnut in my vices that won’t crush or damage lots of the different woods that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among the most frequently used tools. Purchase a good excellent name brand tape measure with a wide tape typically from the 25-foot selection. Although in your store you might not use the tape in these spans, the bigger tape steps offer more rigid tapes which won’t flop around and slip off the end of boards. Assessing when you are by yourself will be a great deal simpler, and of course, quality tape measures can last for many years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood.

What is Woodworking? The Benefits of Woodworking Woodworkers Project

Woodworking is known as the building or the production of objects from wood. It is possible to create a lot of different objects from woodworking and these items are often as large as gazebos or as little as wooden toys. However large or small your private project maybe you will be very likely to accomplish that aim with woodworking. Additionally, woodworking has many personal as well as emotional benefits! In the following article, I will briefly identify some of these benefits for you.

Woodworking as a Career:

Individuals who build things out of wood are generally known keyword as carpenters. Carpenters can work on a variety of woodworking jobs and occupation types. For example, a few carpenters own their carpentry business and these individuals have the luxury to place their work hours. This benefit enables carpenters the opportunity to spend additional time with their families and also have less job stress. Raising children is a really difficult task no matter what way you approach the task! To get a carpenter who owns their own company, this job may not be as hard since that person is going to have more time to become part of her or his child’s life. By playing a larger part in the life span of your child you will be having a larger influence on the type of personality that kid develops into, which is a huge concern for any loving parent. Besides these benefits, carpentry may also have health benefits too.

Finding Woodworking Projects and Plans for Beginners Woodworkers Project

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a whole lot. This results in more physical activity, which leads to better physical health. Keeping your body physically healthy is really important and keyword will assist in preventing the occurrence of various illnesses later on in life. By being physically fit you can reduce chances you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of having a range of different illnesses.

Woodworkers Project, Do It Yourself Woodworking Saves Cash:

I feel like I paid way too much when I go to home improvement stores and buy patio furniture, and I am certain that I am not the only person who has felt like this! A successful business owner once told me to constantly increase the sales price of a commodity to double everything you got it for. In this manner, you always have the option to decrease the product to 50 percent away and still come out without getting any losses. This seems like it might be exactly the same strategy that home improvement shops use in selling their own wooden furniture solutions. Regardless, there’s a way that it is possible to get around paying the additional cash and that has to do with building it yourself. Luckily, there are some really good woodworking products offering thousands of detailed woodworking keyword plans for hundreds of different job types. Thus, you can really build whatever you need or see in almost any home improvement store. Doing something yourself does take a bit of time but the time is well spent when you end up saving hundreds of dollars because of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects