Woodworkers Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are following because all the ideas and projects Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the right option. There are actually lots of things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. People that are only getting started will discover the ideas and projects in Ted’s bundle quite easy. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step-by-step directions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any job of their choice in this package quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it will be endorsed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large dimensions. Yet, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found throughout the internet. Ted has done his best to direct them in every possible way he can, through simple to comprehend textual directions, clear images and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find within. Therefore, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and more woodworking power tools , but the idea is to purchase the crucial hand and power tools which novices will need. You can always increase your toolbox as you get experience!

Woodworkers Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. But if you are unsure about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Each month the authors in woodworking publications do a story about the best way to increase your woodworking craft. When it is showing you how you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodworkers Projects

If you’re a beginner and very interested in doing a DIY job for home afterward, woodworking could be fun. If you do not have the proper information, instruction, and skill, you might wind up spending more time and money than you originally intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential factors you need to remember, before starting with any woodworking project.

1. If you’re a beginner, you must first need to be somewhat interested in woodworking. Making something new with your hands is a particular sense. Do not start a job if you’re not interested, because this might land you at a terrible location.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of this item you are making.

3. Consider your abilities and examine the time you have, before you begin with a project.

4. Start projects that you’re able to complete. If you’re in the middle of a work, then it is better to not begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworkers Projects

If you maintain those essential points in mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects you wish to begin with. As a beginner, always select a project which has quite a basic build up or a simple construction. A few simple to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you can always proceed to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their resources. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Woodworkers Projects

Tools are the ways whereby you will win the battle of woodworking. A lot of people think that power tools are needs. However, for novices, basic hand tools can be very handy and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things considerably simple for you. When you buy a hammer, constantly assess the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws available on the market. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them can help you ahead of time woodworking. You might also buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. However, this isn’t a tool for novices, but using it might make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills will make the task much easy.

8. Additional small and basic tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed cost on woodworking projects. Based on the sort of project you would like to complete, pricing could be set. The simple the job, the less cost it involves. But at the beginning buying the tools will probably be a little hefty. Because of this, it is much better to fix a budget first on the resources, then keyword on the project. Purchasing the basic tools will make certain you don’t have to buy any more material other than the wood ply.

Time and Directions

Instructions are one of the primary things that each and every beginner should follow. Instructions manual is quite simple to understand the process, what to do and the way to do it. Time also has a significant part in the building of woodworking projects. Woodworking projects require time and so it is crucial for a beginner to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword which will allow you to achieve success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success quickly. If you know the objective of woodworking, the item that you need to construct, the resources you need to own and the average time it’s possible to devote daily; then you’re ready to go.

Conclusion, Woodworkers Projects

These strategies and education is likely to create the woodworking projects and strategies for novices fast to finish. Always make sure that you have all of the vital tools, materials, space ready. Read the instructions for constructing an item handy. Appropriate strategy and planning can allow you to earn a fantastic woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Woodworkers Projects

Folks if you’re trying to find a way to pass time or want an alternative method to make money they generally turn to a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be very careful when choosing which job to begin with because you will find projects that can be too tough for a beginner. But do not be concerned about that because we will give you tips on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you pick your job you need to be aware of whether you have the available tools to work on such a project. Try not to invest a lot of cash on buying gear when starting out, purchase more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any gap between the hand as well as the hands.

Starting Your First Woodworking Shop Woodworkers Projects

Woodworking in your home will give you time to research unique jobs and find out so many things. That is why it’s very important to invest less money when starting out so that you can afford to make errors and at any time learning about various jobs.
It’s extremely important that you know about different kinds of wood available for creating jobs. Anticipate carpenters utilize several types of wood quality for decorating bits, learning which type of wood that they use can allow you to prepare the wood you will need for certain jobs you may want to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do can help you in creating good projects to satisfy your needs.

Woodworkers Projects practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of designs using various tools so that you may find the hang of working with the tools. When starting out you may make a number of errors but with time you will find out how to correctly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodworkers Projects

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimal number of tools and equipment. A little home workshop may generate a broad variety of simple projects which will allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products which you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s talk about where you will perform your woodworking, based on the dimensions of your home, you may be able to produce a dedicated space into your woodworking activities. This may be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your first shop. A heated store detached from your home offers one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably create dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw up dust into the upper levels of the house. Another advantage of detached workshops would be, clearly, the noise level. You can work without bothering the rest of the household. A good compromise might be the garage of your home.

This might help minimize the problems of dust and noise, however based on where you reside, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Woodworkers Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. Woodworkers Projects if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top gear can remain in position from project to project. If this setup isn’t impossible, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and gear. In the start, establish a seat area where you can store and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. That will let you work comfortably while standing. Insert a sturdy shelf beneath the seat to house your hands power tools and a pegboard above the seat to hang additional gear. Put in a woodworking at one end of the seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworkers Projects

The reach of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, then purchase your quality tools at the regional building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative local advertisements. There are an abundance of quality gently used programs out there that belong to individuals who stumbled on that 1 molding job around the home or received tools as gifts that they won’t ever utilize. You can usually purchase tools for all these sellers for under half the original cost and save even more money should you make a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will take additional time and perhaps travel expenditures. Weigh the advantages of traveling around town to save a few extra bucks on a cheap piece of equipment. The extra expense of travel and time in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum quantity of hand equipment yet produced sophisticated and intricate bits. Concentrate on developing your abilities with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here is a listing of the useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together in the event that you find them uncomfortable.

The next bit of crucial safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when subjected to high sound levels. These can contain earplugs or complete ear keyword muff protectors. I find a quality set of ear muff protectors is perfect for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. With this set up I am shielding my eyes and my ears. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw after the favorite brand name, this can end up being the most versatile tool in a startup workshop. In fact, at the hands of an expert, a power hand saw can be employed to construct an entire property. At some point, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get a quality brand saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you start your next project. After selecting the proper saw put in a quality blade. Most saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot only cut corners. It’s perfect for cutting holes in wood too like manage slots. Eventually, you’ll want to obtain a band saw. Bandsaws are much more versatile but a quality floor unit could be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch version. Down the street, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their battery life will be bad and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you do not want in your workshop. Purchase an range of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning each drill bit to its potential slot in the holder after every use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents happen. Even though the most ordinary, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The head usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more suited for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage pretty much any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disk and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you’ll find your palm sander using just a little bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll get that this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in concept, these tools allow you to taper borders, sew high stains and fix any imperfections in wood bits. {Begin with a typical amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it usually takes the beginner woodworker a couple of years to collect a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Get a pair of the longest clamps which you could spend. You can contact them for smaller adhesive jobs and expand them to their full length for larger projects.

Shop Vice: A store vice installed in the end of the bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the greater vices offer quick release mechanisms that enable the user to quickly open and close the jaws without tedious handle rotation. The timber clamping surfaces in your vice will occasionally need replacement. I prefer to utilize soft pine in my vices which will not crush or damage many of the various woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most frequently used tools. Purchase a good quality name brand tape measure with a wide tape typically in the 25-foot selection. Even though in your shop you might not use the tape at these spans, the bigger tape steps offer more rigid tapes that will not flop around and slide off the ending of planks. Assessing when you’re by yourself will be a lot easier, and of course, quality tape steps can last for several decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will assist you in marking the right angles in addition to chemical angles. Get the number three and two Robertson set. I find the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. The expense of adhesive through all of your jobs is a little cost consideration. For that reason, it makes sense to go with the best. I also have discovered over the years that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Woodworkers Projects

The peaceful gratification of woodworking is a wonderful experience in this day and age of rushed lives, smart phones, and time-starved careers. With a minimum investment in the most basic equipment and tools, everyone can learn the rewarding skills of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools