Woodworking Articles | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they’re after because most of the thoughts and projects Ted’s source are easy to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for an extensive package, and he ended up making a really’complete’ woodworking resource.

Many may still seem unsure if they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more difficult to make the ideal option. There are in fact lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those that are just getting started will find the ideas and jobs in Ted’s bundle quite easy. Without doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s easy step-by-step instructions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to find any job of their choice in this package quite readily, even though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who buy it’ll be endorsed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down because of its large dimensions. Yet, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available across the net. Ted has done his very best to direct them in every possible way he could, through simple to comprehend textual instructions, clear images and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find within. Therefore, it is definitely worth buying!

The Benefits of Woodworking Woodworking Articles

Woodworking is 1 hobby that could also be a rewarding career if you like to work together with your hands and build exquisite pieces of furniture from wood. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to construct all kinds of furniture, (beds, table, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. Woodworking Articles.

It requires time to become proficient in the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you will have the ability to create some really nice furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living room. It will be a topic of conversation when you have friends come over to visit. They’ll ask: How did you create it? Where did you get the woodworking plans? How long did it take to complete the project? What kind of wood did you use? What kind of tools did you use? How on earth did you make such a gorgeous item of furniture? As you discuss your work, a sense of pride will come over you and do not be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Woodworking Articles

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it is ideal for beginners!

Where to Begin in Woodworking? Woodworking Articles.

Start with an idea in your mind of what you would like to construct then get a excellent woodworking project plan that’s geared toward novices. There are several small woodworking projects for beginners available for purchase from online woodworking retailers. Of course, you can start out with as grand a woodworking program as you pick. On the other hand, the chances are if you begin using a small woodworking project at first, you’ll get a better prospect of keyword finishing the project.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the amount and variety of wood needed, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you want to finish your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not affordable. The beginner needs good woodworking tools, but it is simple to break the bank buying a great deal of tools you may not utilize all that frequently. If you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood adhesive! Of course, you will require a dry place to work and might need a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and more woodworking power tools , but the idea is to buy the crucial hand and power tools which beginners will need. You can always add to your toolbox as you gain experience!

Woodworking Articles Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. However, if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Each month the authors in woodworking publications do a story on the best way to increase your woodworking craft. Whether it is showing you how you can apply an end to a completed project, or how to make a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Articles

If you are a beginner and very interested in doing a DIY job for home afterward, woodworking can be interesting. If you don’t have the proper information, instruction, and skill, you may wind up spending more money and time than you originally meant to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a few essential factors you need to remember, before starting with any woodworking project.

1. If you’re a beginner, you should first have to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Do not begin a job if you’re not interested, because this might land you at a bad place.

2. Consider the primary reason behind making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and analyze the time you have, until you start with a project.

4. Start jobs that you’re able to complete. If you’re in the midst of some work, then it is wise not to begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Articles

If you keep these vital things in your mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much as it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to opt for the woodworking projects that you want to begin with. As a newcomer, always select a project which has a very basic construct up or a simple construction. Some simple to begin projects include, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you can always proceed to the next level of woodworking projects, like cabinets, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their resources. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Woodworking Articles

Tools are the means through which you can win the struggle of woodworking. Many men and women think that power tools are needs. But for novices, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when mended with vises, offer ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters much easy for you. When you purchase a hammer, always assess the balance between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws out there on the market. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You can even buy keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for beginners, but having it would make work easier for you at a later stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the task much simple.

8. Other small and basic tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is no fixed cost on woodworking projects. Dependent on the type of project that you want to complete, pricing can be set. The simple the project, the less price it involves. But at the very beginning buying the tools will be somewhat hefty. Because of this, it’s much better to fix a budget on the resources, then keyword on the undertaking. Purchasing the fundamental tools will make certain you don’t need to buy any more material other than the wood ply.

Time and Instructions

Instructions are one of the primary things that every newcomer should follow. It is like the woodworking Bible. Instructions guide is very easy to comprehend the process, what to do and the way to do it. It keyword is a systematic manual for completing the project. Time also has a significant part in the building of woodworking projects. Woodworking projects demand time and so it’s necessary for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword that can help you to achieve success is proper preparation. With appropriate planning and a strategy, it is possible to achieve success immediately. If you understand the objective of woodworking, then the item you want to build, the tools you require in order to own and the average time it’s possible to devote every day; then you’re all set to go.

Conclusion, Woodworking Articles

All these tips and instruction is likely to create the woodworking projects and strategies for beginners fast to complete. Always make sure you have all of the essential tools, materials, space prepared. Keep the instructions for constructing an item handy. Proper strategy and planning can allow you to make a fantastic woodworking project for your home.

|

Starting Your First Woodworking Shop Woodworking Articles

Folks when trying to find a way to pass time or want an alternative method to make money they usually turn to a hobby that they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can consider. When starting out you have to be very careful when choosing which project to start out with since you will find jobs which can be too difficult for a newbie. But don’t be concerned about that since we will provide you tips on the ideal way to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, so before you choose your job you need to be aware of if you’ve got the available tools to work on such a project. Try not to invest a good deal of cash on purchasing gear when starting out, buy more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand and the hands.

The Benefits of Woodworking Woodworking Articles

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking at home will provide you time to explore different projects and learn a lot of things. That’s why it’s important to invest less money when starting out so you can afford to make errors and at some time learning about various jobs.
It is extremely important you know more about different kinds of wood available for creating projects. Expect carpenters utilize several kinds of wood quality for decorating bits, learning which kind of wood they use can allow you to prepare the wood you will need for certain projects you may choose to pursue.
As soon as you know the basics of wood choice and the use of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to satisfy your needs.

Woodworking Articles practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of layouts using a variety of tools so that you may get the hang of working with the tools. When starting out you can earn a range of errors but with time you will learn how to correctly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Woodworking Articles

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal amount of tools and equipment. A little home workshop may produce a wide array of simple projects which will help you develop your creative and building skills while rewarding you with practical and artistic wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us talk about where you’ll do your woodworking, Depending on the dimensions of your house, you may have the ability to create a dedicated space to your woodworking tasks. This might be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to set up your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw up dust into the top levels of the house. Another benefit of detached workshops would be, clearly, the sound level. You can work without disturbing the remainder of the household. A fantastic compromise might be the garage of your property.

This can help decrease the problems of dust and noise, however based on where you reside, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Woodworking Articles

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to function in. Woodworking Articles if you’re able to have a dedicated spot for a workshop all the greater. Floor gear and bench top gear can stay in position from project to project. If this installation isn’t impossible, at least attempt to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and gear. At the beginning, establish a seat area where you are able to shop and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Insert a sturdy shelf below the bench to home your hands power tools along with a pegboard over the seat to hang other gear. Put in a woodworking vice at one end of the bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Articles

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, then purchase your quality tools in your regional construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional ads. There are an abundance of quality lightly used programs out there that belong to individuals who embarked on that one molding project around the house or obtained tools as gifts that they won’t ever use. You can usually buy tools for these sellers for under half of the initial cost and save even more money if you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a couple added bucks on a cheap piece of gear. The extra cost of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or high finished tools like surface planers in the future.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand equipment yet produced sophisticated and intricate pieces. Focus on developing your abilities with your startup set of tools and avoid lamenting about the equipment you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire quicker when exposed to high sound levels. These can contain earplugs or full ear keyword muff protectors. I find that a excellent set of ear muff guards is ideal for hearing protection.

Lastly, wear a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the favorite name, this may end up being the most versatile tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw can be used to build an whole property. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your second job. After selecting the proper saw put in a quality blade. Most skill saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid blade. These possess a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot only cut curves. It’s ideal for cutting holes in timber too like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the standard 3/8 inch model. Through hard lessons learned, I have discovered that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not need on your workshop. Buy an assortment of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries occur. Even though the most frequent, hammer accidents are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with inferior joints between the head and handle. The head usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disk and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might find that your palm sander using a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll get that this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in concept, these tools allow you to taper edges, sew high stains and correct any imperfections in wood bits. {Begin with a typical number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it normally requires the beginner woodworker a few years to collect a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a set of the maximum clamps which you can spend. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A shop vice installed at the end of the seat is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enabled the user to quickly open and close the limbs with no dull handle rotation. The wood beamed surfaces on your vice will occasionally require replacement. I would rather utilize soft walnut in my vices that won’t crush or damage lots of the various woods that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most often used tools. Purchase a good excellent name brand tape measure with a broad tape usually from the 25-foot selection. Even though in your shop you may not be using the tape in these lengths, the bigger tape steps provide more rigid tapes which will not flop around and slip off the end of planks. Measuring when you are by yourself will be a lot easier, and of course, quality tape measures can last for many decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Woodworking Articles

Woodworking is referred to as the building or the production of items out of wood. It is possible to create a lot of unique objects from woodworking and these objects can be as big as gazebos or as small as wooden toys. However large or small your private project maybe you’ll be very likely to accomplish that aim with woodworking. In addition, woodworking has lots of private in addition to emotional benefits! In this article, I will briefly identify some of these benefits for you.

Woodworking as a Career:

A lot of individuals who like to work with their hands have turned that love into a career through woodworking. Individuals who build things out of wood are usually known keyword as carpenters. Carpenters can operate on a number of woodworking projects and job types. For instance, a few carpenters possess their carpentry company and these individuals have the luxury to place their work hours. This benefit enables carpenters the chance to spend more time with their families and have less job strain. Raising children is a really difficult task no matter what way you approach the task! For a carpenter who owns their own business, this task might not be as hard since that individual will have more time to become part of his or her child’s life. By playing a larger role in the life span of your child you will be having a larger impact on the type of personality that child develops into, which is a massive concern for any loving parent. Besides these benefits, carpentry can also have health benefits too.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Articles

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a lot. This causes more physical activity, which leads to better physical health. Maintaining your body physically fit is vital and keyword can assist in preventing the incidence of various ailments later on in life. By being physically fit you can reduce chances that you will have a heart attack, have seizures, turned into a diabetic, and lower the chances of having a range of different illnesses.

Woodworking Articles, Do It Yourself Woodworking Saves Money:

I feel like that I paid way too far when I go to home improvement stores and buy patio furniture, and I am certain that I’m not the only person that has felt like this! A successful small business owner once advised me to constantly increase the sales price of a product to double everything you’ve got it for. In this manner, you can always reduce the merchandise to 50 percent off and still come out without acquiring any losses. This sounds like it may be the same tactic that home improvement stores use in selling their wooden furniture solutions. Regardless, there’s a way that it is possible to get around paying the extra cash and that has to do with building it yourself. Luckily, there are several really excellent woodworking products that offer thousands of detailed woodworking keyword plans for hundreds of different job types. Thus, you really can build whatever you need or see in almost any home improvement store. Doing something yourself does require a bit of time but the time is well spent when you end up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking joints

Joinery is a part of woodworking that involves joining together pieces of timber or lumber, to produce more complex items. Some wood joints employ fasteners, bindings, or adhesives, while others use only wood elements. The characteristics of wooden joints - strength, flexibility, toughness, appearance, etc. - derive from the properties of the materials involved and the purpose of the joint. Therefore, different joinery techniques are used to meet differing requirements. For example, the joinery used to construct a house can be different from that used to make puzzle toys, although some concepts overlap.

This must be taken into account when joining wood parts together, otherwise the joint is destined to fail. Gluing boards with the grain running perpendicular to each other is often the reason for split boards, or broken joints. Furniture from the 18th century, while made by master craftsmen, did not take this into account. The result is this masterful work suffers from broken bracket feet, which was often attached with a glue block which ran perpendicular to the base pieces. The glue blocks were fastened with both glue and nails, resulting in unequal expansion and contraction between the pieces. This was also the cause of splitting of wide boards, which were commonly used during that period.

In modern woodworking it is even more critical, as heating and air conditioning cause major changes in the moisture content of the wood. All woodworking joints must take these changes into account, and allow for the resulting movement.[3]

Video: Woodworking Tools