Woodworking Bed | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are after because most of the ideas and jobs Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking source.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more challenging to make the right option. There are actually lots of things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. Those that are just getting started will discover the thoughts and jobs in Ted’s package quite simple. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step-by-step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will have the ability to find any project of their choice within this bundle quite readily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it’ll be backed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down due to its large dimensions. Yet, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found across the internet. Ted has done his best to guide them in every conceivable way he could, through easy to comprehend textual directions, clear pictures and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

Finding Woodworking Projects and Plans for Beginners Woodworking Bed

Woodworking is one hobby that can also be a rewarding career if you like to work with your hands and construct beautiful pieces of furniture from timber. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you will have the ability to construct all types of furniture, (table, beds, and chairs), effortlessly. You can then sell your completed woodworking projects and make a handsome profit. Woodworking Bed.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to that expert craftsman level is you will be able to build some really nice furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living room. It will be a topic of conversation when you have friends come over to visit. They’ll ask: How did you create it? Where did you get the woodworking programs? Just how long can it take to finish the job? What kind of tools did you use? How on earth did you create such a gorgeous piece of furniture? As you discuss your job, a feeling of pride will encounter you and don’t be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Bed

If you’re thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it is ideal for beginners!

Where to Begin in Woodworking? Woodworking Bed.

Start with a concept in your mind of what you would like to build then get a really good woodworking project plan that is geared toward beginners. There are numerous little woodworking projects for beginners available for sale from online woodworking retailers. A few woodworking program suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to mention a few. Of course, you can begin with as expansive a woodworking plan as you choose. However, the odds are if you start out with a little woodworking project initially, you will have a better prospect of keyword completing the project.

Your woodworking project plan should include some lists! Lists of: woodworking equipment, the amount and type of wood needed, and the essential hand tools and power tools to complete the undertaking. Note: A word of warning about purchasing woodworking tools. Only buy what you need to complete your instant or upcoming project. This is important especially if you are a beginner and just beginning. Tools are not cheap. The beginner needs good woodworking gear, but it is simple to break the bank buying a lot of tools you may not utilize all that frequently. When you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you could afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood adhesive! Obviously, you’ll require a dry area to work and might need a pair of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools which novices will need. You can always increase your arsenal as you get experience!

Woodworking Bed Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. But if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the writers in woodworking magazines do a story on how to increase your woodworking craft. When it’s showing you how to apply a finish to a finished job, or how to make a mortise and tenon joint, something new could be heard every month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Woodworking Bed

If you are just beginning and very enthusiastic about doing a DIY project for house afterward, woodworking can be fun. If you don’t have the right information, instruction, and skill, you might wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential aspects you should keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you should first have to be somewhat interested in woodworking. Making something new with your hands is a special feeling. Do not start a project if you are not interested, as this may land you at a bad place.

2. Consider the main reason for making this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time you have, until you begin with a job.

4. Start projects that you can complete. If you are in the middle of some work, then it is wise to not start any project in any way.

Finding Woodworking Projects and Plans for Beginners Woodworking Bed

If you maintain these vital things in your mind before beginning a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking jobs that you want to start with. As a newcomer, always pick a project which has a very basic construct up or a very simple construction. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always proceed into the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so you have a better knowledge of working with forests and their resources. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Woodworking Bed

Tools would be the ways whereby you will win the struggle of woodworking. Many men and women believe power tools are requires. But for beginners, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then some tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably easy for you. When you buy a hammer, constantly check the balance between the weight and endure. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws available on the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them can help you ahead of time woodworking. You might even purchase keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills will make the job much easy.

8. Additional small and basic tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed cost on woodworking projects. Dependent on the sort of job that you would like to complete, pricing can be determined. The easy the project, the less cost it involves. But at the very beginning purchasing the tools will be a little hefty. Therefore, it’s better to fix a budget on the tools, then keyword on the undertaking. Purchasing the fundamental tools will make certain you do not need to buy any more material other than the timber ply.

Time and Instructions

Instructions are one of the primary things that each and every beginner should follow. It’s like the woodworking Bible. Instructions manual is quite simple to comprehend the process, what to do and the way to get it done. Time also plays an important part in the building of woodworking projects. Woodworking projects demand time and so it is necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword that will help you to achieve success is proper planning. With appropriate planning and a plan, it’s likely to achieve success immediately. If you understand the objective of woodworking, then the thing you want to build, the tools you need in order to own and the average time you can give daily; then you’re all set to go.

Conclusion, Woodworking Bed

These tips and education will create the woodworking projects and plans for beginners fast to finish. Always make sure you have all of the vital tools, materials, space prepared. Read the instructions for constructing a product handy. Appropriate strategy and planning can allow you to make a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Bed

Folks if you’re trying to find a way to pass time or want an alternative method to generate money they usually turn into a hobby they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based company. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you need to be quite cautious when choosing which project to start out with because you will find jobs which can be too tough for a beginner. But do not be concerned about that since we are going to give you guidelines on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, therefore before you choose your job you need to know if you have the available resources to work on such a project. Try not to spend a lot of cash on buying gear when starting out, buy more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any difference between the hand and the normal hands.

The Benefits of Woodworking Woodworking Bed

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking in your home will give you time to research different projects and find out so many things. That’s why it’s very important to spend less money when starting out so you can manage to make errors and at any time learning about different projects.
It is extremely important you know more about the different types of wood available for making jobs. Anticipate carpenters utilize several kinds of wood quality for decorating bits, learning what type of wood they use can help you prepare the wood you will need for specific jobs you might want to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in building good jobs to satisfy your needs.

Woodworking Bed practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of designs using a variety of tools so you may get the hang of using the tools. When starting out you can earn a number of mistakes but with time you will find out how to correctly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Bed

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimal number of tools and equipment. A little home workshop can produce a broad variety of simple projects which will help you develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us talk about where you’ll perform your woodworking, Depending on the dimensions of your house, you might be able to produce a dedicated space into your woodworking activities. This might be a reserved spot on your garage or on your basement. In some cases, a detached shed or outbuilding might be perfect to prepare your very first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the upper levels of the house. Another benefit of detached workshops would be, clearly, the sound level. You can work without disturbing the rest of the family. A good compromise might be the garage of your home.

This can help minimize the problems of dust and sound, however depending on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Bed

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they add more space to function in. Woodworking Bed if you can have a dedicated place for a workshop all the greater. Floor tools and bench top equipment can remain in place from project to project. If this installation is not impossible, at least attempt to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. In the beginning, establish a seat area where you can shop and use most of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Add a sturdy shelf beneath the bench to house your hands power tools along with a pegboard above the bench to hang other gear. Put in a woodworking at one end of the seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Bed

The reach of your start-up equipment will be mostly based on your financial plan. Whether you have got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then buy your quality tools in the regional building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. You will find plenty of quality gently used tools out there that belong to people who stumbled on that one molding project around the home or received tools as presents which they won’t ever utilize. You can usually buy tools for all these sellers for less than half the original price and save even more money should you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and perhaps travel expenditures. Weigh the advantages of traveling across town to save a couple extra bucks on a inexpensive piece of equipment. The extra cost of time and travel in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum amount of hand equipment yet produced sophisticated and intricate pieces. Focus on developing your abilities with your start-up set of tools and prevent lamenting about the equipment you wished you’d.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Purchase a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to these noise levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire quicker when exposed to high noise levels. These can include earplugs or full ear keyword muff protectors. I find that a quality set of ear muff protectors is perfect for hearing protection.

Lastly, wear a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often known as a skill saw after the favorite name, this can prove to be the most flexible instrument in a start-up workshop. In reality, in the hands of a professional, a power hand saw can be used to build an whole property. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you start your next project. After selecting the proper saw put in a quality blade. Most skill saws include a starter blade of lesser quality even if they are a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Start with a hybrid . All these have a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t only cut corners. It’s ideal for cutting holes in timber too like manage slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a excellent floor unit can be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch version. Down the street, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you don’t want on your workshop. Purchase an range of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning every drill bit to its potential slot in the holder after each use. Last, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents happen. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The mind usually comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you’ll likely upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface area. As you embark on the first few projects you’ll discover that your palm sander with a little bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this grade of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in concept, these tools allow you to taper edges, sew high stains and correct any imperfections in wood bits. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, good clamps are costly and it normally takes the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure is still the same. Get a set of the maximum clamps that you can afford. You may get in touch with them for smaller adhesive jobs and expand them to their entire length for larger jobs.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the jaws without tedious handle turning. The timber beamed surfaces on your vice will periodically need replacement. I would rather use soft pine in my vices that won’t crush or damage lots of the various woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most often used tools. Purchase a good quality name brand tape measure with a broad tape usually in the 25-foot range. Even though in your shop you might not be using the tape in these spans, the larger tape steps provide more rigid tapes that won’t flop around and slide off the ending of planks. Assessing when you are on your own will be a lot easier, and naturally, quality tape measures can endure for many years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require additional sanding.

What is Woodworking? The Benefits of Woodworking Woodworking Bed

Woodworking is known as the building or the creation of objects from wood. It is possible to create a great deal of unique objects from woodworking and these objects can be as big as gazebos or as small as wooden toys. No matter how big or small your private project maybe you will be quite likely to accomplish that aim with woodworking. Additionally, woodworking has lots of personal in addition to emotional benefits! In the following guide, I will briefly identify some of the benefits for you.

Woodworking as a Career:

A lot of people who like to work with their hands have turned that love into a career through woodworking. People who build things from wood are generally known keyword because carpenters. Carpenters can operate on a number of woodworking projects and occupation types. For instance, a few carpenters possess their carpentry business and these folks have the luxury to place their job hours. This advantage enables carpenters the chance to spend more time with their own families and also have less job stress. Raising children is a very difficult task regardless of what way you approach the endeavor! To get a carpenter who owns their own company, this task might not be as hard since that individual is going to have more time to be part of her or his child’s lifetime. By playing a bigger part in the life span of your child you’ll be having a larger influence on the type of personality that child develops into, which is a huge concern for any loving parent. Besides these advantages, carpentry can also have health benefits too.

The Benefits of Woodworking Woodworking Bed

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a lot. This results in more physical activity, which leads to better physical health. Keeping your body physically fit is vital and keyword can help prevent the occurrence of various ailments later on in life. By being physically fit you can decrease chances that you will have a heart attack, have seizures, turned into a diabetic, and reduce the chances of giving birth to a range of other illnesses.

Woodworking Bed, Do It Yourself Woodworking Saves Cash:

I feel like I paid way too far when I go to home improvement stores and buy patio furniture, and I am sure that I am not the only person who has felt like this! A successful small business owner once advised me to constantly raise the sales price of a commodity to double what you obtained it for. In this manner, you can always decrease the product to 50 percent off and still come out without getting any losses. This sounds like it may be exactly the exact same strategy that home improvement stores use in selling their own wooden furniture solutions. Regardless, there is a way that it is possible to get around paying the extra cash and that has to do with building it yourself. Luckily, there are several really good woodworking products that offer thousands of comprehensive woodworking keyword strategies for hundreds of different project types. So, you can really build whatever you want or see in almost any home improvement store. Doing something does require a bit of time but time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects