Woodworking Catalogs | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they’re following because all the ideas and projects Ted’s resource are simple to understand and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more difficult to make the ideal choice. There are in fact lots of things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. People that are only getting started will discover the thoughts and projects in Ted’s package quite easy. Without doubt, intricate carpentry is involved; however, they will find it really easy to follow Ted’s easy step-by-step directions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to find any project of their choice in this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it will be backed by a 60-day warranty, so if this woodworking package fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large size. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found across the internet. Ted has done his very best to guide them in every conceivable way he can, through easy to understand textual directions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking projects they will find inside. So, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools which novices will need. You can always increase your toolbox as you get experience!

Woodworking Catalogs Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to complete your project. But if you are not certain about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Each month the writers in woodworking magazines do a story on how best to increase your woodworking craft. Whether it’s showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is purchasing educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Woodworking Catalogs

If you’re a beginner and very enthusiastic about doing a DIY job for house then, woodworking can be fun. If you don’t have the proper information, education, and skill, you might wind up spending more money and time than you initially intended to spend. As a novice woodworker, you need to have time and the correct tools. Having said, there are a couple of essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be very interested in woodworking. Making something new with your hands is a special sense. Don’t start a project if you’re not interested, because this might land you at a bad place.

2. Consider the main reason behind creating this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and analyze the time that you have, before you start with a job.

4. Start jobs which you’re able to complete. If you are in the middle of some work, then it’s better not to begin any project in any way.

How to Become a Master Woodworker From Your Own Home Woodworking Catalogs

If you keep these essential things in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking projects you wish to start with. As a newcomer, always select a project that has quite a basic construct up or a simple structure. Some easy to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you can always proceed into the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning jobs should keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Woodworking Catalogs

Tools would be the means whereby you will win the struggle of woodworking. A lot of people believe power tools are needs. However, for novices, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters considerably easy for you. When you buy a hammer, always check the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available on the market. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them can help you in advance woodworking. You can also purchase keyword power screwdrivers as they make the job much faster.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this is not a tool for beginners, but using it might make work easier for you at a later stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills can make the task much easy.

8. Other small and basic tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking projects. Based on the sort of job you want to finish, pricing could be set. The simple the project, the less cost it involves. However, at the beginning purchasing the tools will probably be somewhat hefty. Therefore, it’s better to resolve a budget first on the resources, then keyword on the undertaking. Buying the basic tools will make certain you don’t have to purchase any more material aside from the timber ply.

Time and Instructions

Directions are one of the principal things that every newcomer should follow. Instructions manual is very simple to comprehend the process, what to do and the way to get it done. Time also plays an important part in the construction of woodworking jobs. Woodworking projects require time and so it is crucial for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that will make the work easy. But the most essential thing keyword that can help you to achieve success is proper preparation. With proper planning and a plan, it is likely to achieve success immediately. If you know the objective of woodworking, the item that you need to construct, the resources you need in order to possess and the average time you can give daily; then you’re ready to go.

Conclusion, Woodworking Catalogs

These tips and education will make the woodworking projects and plans for novices fast to finish. Always make sure you have all the essential tools, materials, area ready. Keep the instructions for building a product handy. Proper strategy and preparation will allow you to earn a fantastic woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Catalogs

Folks if you’re trying to find a way to pass time or want an alternative method to generate money they usually turn to a hobby they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can consider. When starting out you have to be very careful when choosing which project to start out with since you will find jobs which may be too tough for a beginner. But don’t worry about that because we will give you tips on the right means to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you choose your job you have to know if you’ve got the available resources to work on that job. Try not to invest a lot of cash on purchasing gear when starting out, buy more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any gap between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Woodworking Catalogs

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will provide you time to research different jobs and learn a lot of things. That’s why it’s very important to spend less money when starting out so you can manage to make errors and at any time learning about different projects.
It is extremely important you know about different types of wood available for making projects. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning which kind of wood they use can allow you to prepare the wood you’ll need for certain projects you might want to pursue.
Once you know the fundamentals of wood selection and the use of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in building good projects to fulfill your needs.

Woodworking Catalogs practice makes perfect so be sure you practice your work every day if possible. Try out a lot of designs utilizing various tools so that you can get the hang of using the tools. When starting out you may make a range of mistakes but with time you will learn how to properly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Catalogs

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimum amount of tools and equipment. A small home workshop may generate a broad array of simple projects which can help you develop your creative and building abilities while rewarding you with artistic and practical wood products which you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will perform your woodworking, Depending on the dimensions of your home, you might have the ability to create a dedicated space to your woodworking activities. This may be a reserved place on your garage or in your cellar. In some cases, a detached shed or outbuilding may be perfect to set up your first shop. A heated shop detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement workshops will inevitably create dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the upper levels of the house. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without bothering the rest of the family. A fantastic compromise could be the garage of your property.

This might help decrease the problems of dust and sound, however based on where you live, a keyword garage layout may not be practical during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Woodworking Catalogs

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Woodworking Catalogs if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top equipment can stay in position from project to project. If this installation isn’t hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and gear. At the start, establish a seat area where you can shop and use most of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf beneath the seat to house your hand power tools and a pegboard above the bench to hang other equipment. Install a woodworking at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Catalogs

The scope of your startup equipment will be largely based on your financial plan. Whether you have got large financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, then purchase your quality tools at the regional building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other local ads. You will find an abundance of quality gently used programs out there that belong to people who stumbled on that 1 molding project around the house or obtained tools as gifts that they will never utilize. You can usually purchase tools for all these sellers for under half of the initial cost and save even more money should you create a bundle deal for all their unused equipment. Of course, getting tools from private individuals will require additional time and perhaps travel expenditures. Weigh out the benefits of traveling across town to save a few added dollars on a inexpensive piece of equipment. The excess cost of travel and time in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal quantity of hand gear yet produced sophisticated and complex pieces. Focus on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you’d.
Here is a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect safety. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire faster when subjected to high sound levels. These may include earplugs or full ear keyword muff protectors. I find a excellent pair of ear muff guards is ideal for hearing protection.

Lastly, put on a cap to keep the dust from your hair. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite brand name, this can end up being the most flexible tool in a startup workshop. In fact, at the hands of a professional, a power hand saw could be used to construct an whole house. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second job. After choosing the right saw put in a quality blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut corners. It is ideal for cutting holes in timber also like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more flexible but a excellent floor unit can be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their battery life will be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not need on your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its potential slot at the holder after every use. Last, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents occur. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you’ll discover that your palm sander with a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll get this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in concept, these tools allow you to taper edges, sew high stains and correct any imperfections in wood bits. {Start with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a few years to accumulate a detailed set of wood clamps. Start with a set of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure remains the same. Get a pair of the longest clamps which you could spend. You may contact them for smaller glue jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed at the end of your seat is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enabled the consumer to quickly open and close the jaws with no dull handle turning. The timber clamping surfaces on your vice will periodically require replacement. I would rather use soft pine in my vices which will not crush or damage lots of the various woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among the most frequently used tools. Buy a fantastic quality name brand tape measure with a wide tape typically in the 25-foot selection. Although in your store you might not use the tape in these lengths, the bigger tape measures offer more rigid tapes which will not flop around and slip off the end of planks. Assessing when you’re on your own will be a lot easier, and of course, quality tape steps can endure for many years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can help you in marking the ideal angles in addition to chemical angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood documents. The cost of adhesive through all your jobs is a little cost consideration. For that reason, it is sensible to go with the best. I have also discovered over the years that I receive the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Woodworking Catalogs

The peaceful gratification of woodworking is a wonderful experience in this era of hurried lives, smartphones, and time-starved careers. With a minimum investment at the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested hobby and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodcraft Supply

Woodcraft Supply, LLC operates woodworking specialty retail stores across the United States (including 34 of 50 U.S. states). It also publishes a woodworking industry magazine, distributes consumer catalogs (in all 50 U.S. states and 117 countries)[1] and operates an ecommerce website.[2] The stores, catalogs and website combined sell about 20,000 products covering wood working tools, raw materials, instructional media and project kits.[3][4][5][6]

In the 1960s, Roger Wells bought Woodcraft and moved the headquarters to Woburn, Massachusetts. Woodcraft moved into a warehouse and corporate office after the success of its initial printed ads which led to creation of its catalog. Sam Ross, founder of SBR Inc., bought Woodcraft in 1972 and used his retail experience to build new stores and grow the company. In 1992, Sam Ross moved Woodcraft headquarters to Parkersburg, West Virginia.[8][9]

Woodcraft opened a new Boston area corporate location in Walpole, Massachusetts in 2013. That same year, Woodcraft and the Swiss toolmaker Pfeil celebrated 50 years as international business partners.[12]

Video: Woodworking Tools