Woodworking Classes | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re after because most of the ideas and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more challenging to make the right choice. There are in fact many things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. People that are only getting started will find the thoughts and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is involved; nonetheless, they will find it really easy to follow Ted’s easy step-by-step instructions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will be able to locate any project of their choice in this bundle quite easily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who purchase it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large size. Yet, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that can be found throughout the internet. Ted has done his very best to guide them in every possible way he could, through simple to understand textual directions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it’s certainly worth buying!

How to Become a Master Woodworker From Your Own Home Woodworking Classes

Woodworking is 1 hobby that can also be a rewarding profession if you like to work together with your hands and build exquisite pieces of furniture from wood. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to construct all kinds of furniture, (table, beds, and chairs), effortlessly. You can then sell your completed woodworking jobs and make a handsome profit. Woodworking Classes.

It takes time to become proficient in the craft of woodworking. The nice thing about working up to that expert craftsman level is you’ll have the ability to build some really nice furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living room. It’ll be a topic of conversation when you have friends come over to visit. They will ask: How can you make it? How long did it take to complete the job? What kind of tools did you use? How on earth did you make such a gorgeous piece of furniture? As you discuss your work, a sense of pride will come over you and also don’t be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Woodworking Classes

If you are thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Woodworking Classes.

Begin with an idea in your mind of what you want to build then get a excellent woodworking project plan that’s geared toward novices. There are numerous small woodworking projects for beginners available for sale from online woodworking retailers. Of course, you can start out with as grand a woodworking program as you pick. On the other hand, the odds are if you start out using a small woodworking job at first, you’ll have a better chance of keyword completing the job.

Your woodworking project plan must incorporate some lists! Lists of: woodworking hardware, the amount and type of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Only buy what you want to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools are not cheap. The newcomer needs good woodworking tools, but you can easily break the bank purchasing a lot of tools you might not utilize all that often. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t forget the wood glue and a brush to spread the wood adhesive! Of course, you’ll require a dry place to work and may require a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and much more woodworking power tools , but the idea is to buy the essential hand and power tools which beginners will need. You can always increase your toolbox as you gain experience!

Woodworking Classes Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Every month the writers in woodworking publications do a story about how best to improve your woodworking craft. When it’s showing you the way you can apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

The Benefits of Woodworking Woodworking Classes

If you’re just beginning and very interested in doing a DIY project for home then, woodworking can be interesting. If you do not have the proper information, instruction, and skill, you may wind up spending more time and money than you originally meant to spend. As a novice woodworker, you need to have time and the appropriate tools. Having mentioned, there are a few essential aspects that you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a project if you are not interested, because this might land you at a terrible place.

2. Think of the main reason behind making this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your skills and analyze the time you have, before you start with a job.

4. Start projects that you can complete. If you’re in the middle of some work, then it is better to not start any project in any way.

Starting Your First Woodworking Shop Woodworking Classes

If you maintain those vital points in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking jobs that you want to start with. As a beginner, always select a job that has a very basic build up or a very simple structure. Some easy to begin projects include, bird feeder, benches, shelves, etc.. The moment you find these techniques, you can always move to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning jobs should keyword be less complicated and less frustrating so you have a better comprehension of working with forests and their resources. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Woodworking Classes

Tools are the means whereby you will win the struggle of woodworking. Many people think that power tools are needs. However, for beginners, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much simple for you. When you purchase a hammer, constantly assess the balance between the weight and endure. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws out there in the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them can help you in advance woodworking. You can also purchase keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this is not a tool for novices, but having it would make work simpler for you at a subsequent stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the task much simple.

8. Other small and basic tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed price on woodworking projects. Based on the type of project that you want to complete, pricing could be set. The easy the project, the less cost it involves. But at the beginning buying the tools will be somewhat hefty. Because of this, it’s much better to fix a budget on the tools, then keyword on the undertaking. Purchasing the basic tools will ensure that you don’t have to purchase any more material aside from the timber ply.

Time and Directions

Instructions are one of the primary things which each and every newcomer should follow. Instructions guide is quite simple to understand the procedure, what to do and how to get it done. It keyword is a systematic manual for completing the job. Time also has a significant part in the building of woodworking projects. Woodworking projects demand time and therefore it’s crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword that can help you to reach success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success quickly. If you know the objective of woodworking, then the item that you need to build, the tools you need to own and the typical time you can give daily; then you’re all set to go.

Conclusion, Woodworking Classes

All these tips and education is likely to make the woodworking projects and strategies for beginners quickly to finish. Always make sure you have all the essential tools, materials, space ready. Read the instructions for building an item handy. Appropriate strategy and preparation can allow you to make a great woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Classes

People when trying to find a way to pass time or want an alternate way to generate money they usually turn into a hobby they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you need to be quite careful when choosing which project to start out with since you will find projects that may be too tough for a newbie. But do not worry about that since we will provide you tips on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you pick your job you have to be aware of whether you have the available tools to work on that job. Try not to invest a good deal of cash on buying equipment when starting out, buy more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will not be any gap between the hand and the hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Classes

Woodworking in your home will provide you time to research unique projects and find out so many things. That’s why it’s very important to spend less money when starting out so you can manage to make mistakes and at any time learning about various jobs.
It’s very important you know about the different types of wood available for making jobs. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning what type of wood they use can allow you to prepare the wood you will need for certain projects you may choose to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in building good jobs to fulfill your needs.

Woodworking Classes practice makes perfect so make sure you practice your work daily if possible. Try out lots of layouts utilizing a variety of tools so you can get the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to properly use them and produce quality projects.

|

The Benefits of Woodworking Woodworking Classes

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimum amount of tools and equipment. A little home workshop may generate a broad variety of simple projects that can help you develop your creative and construction skills while rewarding you with practical and artistic wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s discuss where you’ll do your woodworking, based on the dimensions of your home, you might have the ability to produce a dedicated space to your woodworking activities. This might be a reserved place in your garage or on your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your very first store. A heated shop detached from your home offers one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably create dust which travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the cellar draw up dust into the top levels of the house. Another advantage of detached workshops would be, clearly, the sound level. It’s possible to work without bothering the rest of the household. A fantastic compromise could be the garage of your property.

This might help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage layout may not be sensible during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Woodworking Classes

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Woodworking Classes if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top gear can stay in position from project to project. If this setup is not impossible, at least try to create a bench area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. At the beginning, establish a seat area where you are able to shop and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. That will enable you to work comfortably while standing. Add a sturdy shelf beneath the bench to house your hands power tools and a pegboard above the seat to hang other equipment. Install a woodworking at one end of the bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Classes

The reach of your startup equipment will be largely based on your financial plan. Whether you have got large financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, then buy your quality tools in your local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional ads. You will find plenty of quality lightly used programs out there which belong to people who stumbled on that one molding project around the home or obtained tools as presents which they won’t ever utilize. You can usually buy tools for all these sellers for less than half the initial cost and save even more money should you create a package deal for all their unused equipment. Obviously, getting tools from private people will take additional time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a couple added dollars on a cheap piece of equipment. The extra cost of travel and time in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal amount of hand equipment yet produced sophisticated and intricate bits. Focus on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you had.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and affect safety. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next piece of critical safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to high sound levels. Last, put on a cap to keep the dust out of your hair. I prefer a very simple ball cap with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw after the favorite name, this can end up being the most flexible instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw could be employed to construct an whole house. Eventually, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget empowers him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you even start your next project. After choosing the right saw install a quality blade. Most skill saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut curves. It’s ideal for cutting holes in wood also like handle slots. Eventually, you’ll want to get a ring saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss over the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you do not want in your workshop. Buy an assortment of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after every use. Last, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries happen. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more suited for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle just about any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you’ll probably upgrade to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you’ll find your palm sander using just a little bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber bits. {Start with a standard amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually takes the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Begin with a set of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure is still the same. Receive a set of the maximum clamps which you can spend. You can get in touch with them for smaller glue jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the consumer to rapidly open and close the limbs with no tedious handle turning. The timber clamping surfaces on your vice will occasionally need replacement. I prefer to use soft walnut in my vices which will not crush or damage lots of the various woods that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape typically in the 25-foot range. Although in your store you might not use the tape at these spans, the bigger tape measures provide more rigid tapes that will not flop around and slide off the ending of boards. Measuring when you’re on your own will be a lot simpler, and of course, quality tape measures can endure for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Woodworking Classes

Woodworking is known as the building or the creation of objects from wood. It is possible to produce a great deal of unique objects from woodworking and these items can be as big as gazebos or as little as wooden toys. However large or small your personal project maybe you will be quite likely to accomplish that aim with woodworking. Additionally, woodworking has many private in addition to psychological benefits! In the following article, I am going to briefly identify some of the benefits for you.

Woodworking as a Career:

People who build things out of wood are generally known keyword because carpenters. Carpenters can work on a number of woodworking projects and job types. For instance, a few carpenters possess their carpentry company and these individuals have the luxury to set their job hours. This advantage enables carpenters the opportunity to spend additional time with their families and have less job stress. Raising kids is a very tough task regardless of what way you approach the task! To get a carpenter who possesses their own business, this task may not be hard because that individual is going to have more time to be a part of her or his child’s life. By playing a bigger part in the life of your child you’ll be having a greater impact on the type of personality that child develops into, which is a massive concern for any loving parent. Besides these advantages, carpentry can also have health benefits as well.

Finding Woodworking Projects and Plans for Beginners Woodworking Classes

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a whole lot. This causes more physical activity, which results in better physical health. Keeping your body physically fit is vital and keyword can assist in preventing the incidence of various ailments in the foreseeable future life. By being physically fit you can reduce chances that you will have a heart attack, have seizures, turned into a diabetic, and lower the odds of giving birth to a number of other disorders.

Woodworking Classes, Do It Yourself Woodworking Saves Money:

I feel as I paid way too much when I go to home improvement shops and buy patio furniture, and I am certain that I am not the only person that has felt this way! A successful business owner once told me to always increase the sales price of a product to double what you obtained it for. This way, you can always reduce the product to 50 percent away and come out without acquiring any losses. This sounds like it might be the same tactic that home improvement stores use in selling their wooden furniture solutions. Regardless, there is a way which it is possible to get around paying the additional money and that has to do with building it yourself. Luckily, there are several really excellent woodworking products offering thousands of comprehensive woodworking keyword strategies for hundreds of different project types. So, you can really build whatever you need or see in almost any home improvement store. Doing something yourself does require a little bit of time but the time is well spent when you end up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

College Woodwork

College Woodwork is a century-old furniture manufacturer located in Oshawa, Ontario, Canada and is a subsidiary of Kingsway College. College Woodwork was originally a woodworking class for students attending Lornedale Academy and today provides employment for students of Kingsway College.[1]

College Woodwork began in the early 1900s as a woodworking class for students attending Lornedale Academy. For both philosophical and economic reasons, work was viewed as an essential component of education. By 1920, the woodworking class had grown into a business producing small household items such as trellises, playpens, potty chairs, ladders and ironing boards. Furniture was a natural extension of the product line, and by the early 1960s, production focused on simple furniture.

Video: Woodworking Projects