Woodworking Crafts | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re after because all the ideas and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years exploring so he could gather enough material for an extensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still seem unsure if they should be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. Those who are just getting started will discover the ideas and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s simple step by step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers are going to be able to locate any project of their choice in this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who purchase it’ll be backed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large size. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overrun considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that are available across the net. Ted has done his very best to direct them in every conceivable way he can, through easy to comprehend textual instructions, clear images and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find inside. Therefore, it is certainly worth buying!

Finding Woodworking Projects and Plans for Beginners Woodworking Crafts

Woodworking is one hobby that could also be a rewarding profession if you like to work with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you’ll be able to build all kinds of furniture, (table, beds, and chairs), effortlessly. After that you can sell your completed woodworking jobs and make a handsome profit. Woodworking Crafts.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman level is you will be able to build some really nice furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living room. It’ll be a topic of conversation when you have friends come over to see. They’ll ask: How can you make it? Where did you get the woodworking programs? How long can it take to finish the job? What kind of wood did you use? What kind of tools did you use? Just how on earth did you make such a gorgeous item of furniture? As you discuss your job, a feeling of pride will come over you and also do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Crafts

If you are thinking you are too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to begin in Woodworking? Woodworking Crafts.

Begin with a concept in your mind of what you would like to build then get a excellent woodworking project plan that is geared toward novices. There are several little woodworking projects for beginners available for sale from online woodworking merchants. A couple of woodworking plan suggestions for you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to mention a few. Of course, you can start out with as expansive a woodworking program as you pick. However, the odds are if you start out using a small woodworking job at first, you’ll have a better chance of keyword completing the project.

Your woodworking project plan must include some lists! Lists of: woodworking hardware, the quantity and variety of wood needed, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about buying woodworking tools. Just buy what you want to finish your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking tools, but it is simple to break the bank buying a great deal of tools you may not use all that often. If you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget the wood glue and a brush to spread the wood glue! Obviously, you will need a dry area to work and might need a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools here, but the concept is to buy the crucial hand and power tools which beginners will need. You may always increase your arsenal as you get experience!

Woodworking Crafts Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Each month the authors in woodworking magazines do a story on how best to improve your woodworking craft. Whether it’s showing you how you can apply an end to a completed job, or how to create a mortise and tenon joint, something new can be heard each month. Next, is purchasing educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop Woodworking Crafts

If you are just beginning and very interested in doing a DIY project for home then, woodworking can be fun. If you don’t have the proper information, education, and skill, you might land up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having said, there are a couple of essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first have to be very interested in woodworking. Making something new with your hands is a particular sense. Do not begin a project if you’re not interested, because this might land you at a terrible place.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your skills and analyze the time you have, before you begin with a project.

4. Start projects that you’re able to complete. If you’re in the middle of a work, then it’s better not to start any project in any way.

The Benefits of Woodworking Woodworking Crafts

If you keep those essential points in your mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking projects you wish to start with. As a beginner, always select a job that has a very basic build up or a very simple structure. A few simple to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you could always proceed to the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning jobs should keyword be less complicated and less frustrating so that you have a better comprehension of working with woods and their tools. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Woodworking Crafts

Tools are the means whereby you will win the battle of woodworking. A lot of people believe power tools are needs. But for beginners, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things much simple for you. When you purchase a hammer, always assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws available in the marketplace. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them can help you ahead of time woodworking. You can also buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but using it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking jobs. Based on the type of job that you would like to complete, pricing could be determined. The easy the job, the less cost it involves. However, at the very beginning purchasing the tools will probably be somewhat hefty. Therefore, it is better to resolve a budget first on the resources, then keyword on the undertaking. Purchasing the fundamental tools will make certain you do not need to buy any more material other than the wood ply.

Time and Directions

Instructions are one of the primary things that each and every beginner should follow. It’s like the woodworking Bible. Instructions manual is very easy to understand the procedure, what to do and the way to get it done. Time also plays an important part in the building of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword that will allow you to reach success is proper planning. With appropriate planning and a plan, it is possible to achieve success immediately. If you understand the objective of woodworking, the thing you want to construct, the tools you need to own and the average time it’s possible to devote daily; then you’re all set to go.

Conclusion, Woodworking Crafts

All these strategies and education is likely to make the woodworking projects and plans for novices quickly to finish. Always ensure that you have all the vital tools, materials, space prepared. Keep the instructions for building a product handy. Appropriate strategy and preparation will allow you to earn a great woodworking project for your home.

|

Starting Your First Woodworking Shop Woodworking Crafts

People if you’re trying to find a way to pass time or want an alternate way to make money they usually turn to a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you have to be quite careful when choosing which project to begin with because there are jobs which may be too difficult for a beginner. But do not be concerned about that because we are going to provide you tips on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, therefore before you choose your project you need to be aware of whether you’ve got the available resources to work on that job. Try not to spend a lot of cash on purchasing equipment when starting out, purchase more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any difference between the hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Woodworking Crafts

Woodworking in your home will provide you time to explore different jobs and find out a lot of things. That is why it’s very important to spend less money when starting out so that you can manage to make errors and at any time learning about different projects.
It is extremely important that you know about different kinds of wood available for creating jobs. Anticipate carpenters utilize different types of wood quality for decorating bits, learning what type of wood that they use will allow you to prepare the wood you’ll need for certain jobs you may choose to pursue.
As soon as you understand the fundamentals of wood choice and the usage of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in creating good projects to satisfy your needs.

Woodworking Crafts practice makes perfect so be sure that you practice your work daily if at all possible. Try out lots of layouts utilizing a variety of tools so you may get the hang of working with the tools. When starting out you can make a range of errors but with time you will learn how to properly utilize them and produce quality projects.

|

The Benefits of Woodworking Woodworking Crafts

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimum number of tools and equipment. A small home workshop can generate a broad variety of simple projects that can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you will do your woodworking, based on the size of your home, you might have the ability to produce a dedicated space into your woodworking activities. This may be a reserved place in your garage or on your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air yields found in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without disturbing the remainder of the family. A fantastic compromise could be the garage of your home.

This can help decrease the difficulties of dust and sound, however based on where you reside, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Crafts

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they include more space to work in. Woodworking Crafts if you’re able to have a dedicated spot for a workshop all the better. Floor tools and bench top equipment can remain in place from project to project. If this installation isn’t impossible, at least attempt to create a bench area where equipment could be saved and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. In the start, set up a bench area where you can shop and use the majority of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Add a sturdy shelf beneath the bench to home your hands power tools and a pegboard above the seat to hang other gear. Put in a woodworking at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Crafts

The scope of your start-up equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, purchase your quality tools at your local building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional advertisements. There are plenty of quality lightly used programs out there which belong to individuals who stumbled on that 1 molding project around the house or obtained tools as presents which they won’t ever utilize. You can usually buy tools for all these sellers for less than half of the original price and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and perhaps travel expenditures. Weigh out the benefits of traveling across town to save a couple added dollars on a cheap piece of gear. The excess expense of travel and time in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum quantity of hand equipment yet generated sophisticated and complex pieces. Focus on developing your abilities with your startup set of tools and avoid lamenting about the equipment you wished you’d.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together in the event that you find them uneasy.

The next piece of critical safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. With this setup I’m shielding my eyes and my ears. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw following the favorite name, this can end up being the most flexible tool in a start-up workshop. In fact, in the hands of a professional, a power hand saw could be used to build an whole property. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a funding enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your next job. After choosing the proper saw install an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and put in an excellent blade with carbide teeth. Begin with a hybrid . All these have a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t just cut curves. It’s ideal for cutting holes in wood too like manage slots. At some point, you’re going to want to get a band saw. Bandsaws are even more versatile but a quality floor unit can be costly. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have discovered that purchasing quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is one annoyance you don’t want on your workshop. Buy an assortment of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning each drill piece to its prospective slot in the holder after each use. Last, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop accidents occur. Even though the most ordinary, hammer injuries are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The head typically comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle just about any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disc and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface space. As you embark on the first few projects you’ll discover that your palm sander using just a little bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll get this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in concept, these tools enable you to taper borders, sew high stains and fix any imperfections in timber pieces. {Begin with a standard amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, superior clamps are costly and it normally requires the beginner woodworker a few years to collect a detailed set of wood clamps. Start with a pair of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Receive a set of the longest clamps which you could spend. You may contact them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A store vice installed in the end of the bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enable the consumer to rapidly open and close the limbs with no tedious handle rotation. The wood beamed surfaces on your vice will periodically need replacement. I prefer to utilize soft walnut in my vices which won’t crush or damage many of the various forests that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among your most often used tools. Buy a good quality name brand tape measure with a wide tape usually in the 25-foot selection. Although in your store you may not use the tape at these spans, the bigger tape steps offer more rigid tapes that won’t flop around and slip off the end of planks. Assessing when you are on your own will be a lot easier, and of course, quality tape steps can endure for many decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversized carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles as well as compound angles. Get the number two and three Robertson set. I discover that the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. The expense of adhesive through all your projects is a minor cost consideration. For that reason, it is sensible to decide on the best. I have also found over time that I get the best results with both indoor and outdoor projects once I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Woodworking Crafts

The peaceful gratification of woodworking is a wonderful experience in this day and age of hurried lives, smart phones, and time-starved careers. With a minimum investment in the most rudimentary tools and equipment, everyone can learn the rewarding skills of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools