Woodworking Designs Furniture | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those attributes alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking when they are after because all the ideas and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are in fact many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. People who are only getting started will discover the ideas and jobs in Ted’s package quite simple. No doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to find any project of their choice in this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who buy it will be backed by a 60-day guarantee, so if this woodworking package fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large size. Nonetheless, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast it contains just about every woodworking project a woodworker might be interested in building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available across the internet. Ted has done his best to direct them in every conceivable way he can, through easy to comprehend textual directions, clear images and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it is certainly worth buying!

How to Become a Master Woodworker From Your Own Home Woodworking Designs Furniture

Woodworking is 1 hobby that can also be a rewarding profession if you love to work with your hands and build exquisite pieces of furniture from wood. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll be able to construct all kinds of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. Woodworking Designs Furniture.

It takes time to become proficient at the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you’ll be able to create some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living space. It will be a topic of conversation when you have friends come over to visit. They will ask: How did you make it? Where did you get the woodworking programs? Just how long did it take to complete the job? What type of tools did you use? How on earth did you create such a gorgeous piece of furniture? As you speak about your job, a feeling of pride will encounter you and do not be surprised if your friends ask you to make one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Designs Furniture

If you’re thinking you are too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it is perfect for beginners!

Where to Begin in Woodworking? Woodworking Designs Furniture.

Start with an idea in mind of what you would like to build then get a excellent woodworking project plan that is geared toward novices. There are numerous small woodworking projects for novices available for sale from online woodworking merchants. A couple of woodworking program suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to name a couple. Of course, you can start out with as expansive a woodworking plan as you pick. On the other hand, the chances are if you start out using a little woodworking job at first, you will have a better chance of keyword completing the job.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the quantity and variety of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of warning about buying woodworking tools. Just buy what you want to complete your instant or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not cheap. The beginner needs good woodworking gear, but you can easily break the bank buying a great deal of tools you might not utilize all that often. If you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget that the wood glue and a brush to spread the wood adhesive! Of course, you’ll need a dry area to work and may require a pair of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and much more woodworking power tools here, but the concept is to buy the crucial hand and power tools that beginners will need. You may always increase your arsenal as you gain experience!

Woodworking Designs Furniture Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you are not certain about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the writers in woodworking magazines do a story on how best to increase your woodworking craft. Whether it is showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be heard every month. Next, is buying instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Woodworking Designs Furniture

If you’re just beginning and very interested in doing a DIY project for home then, woodworking can be fun. If you don’t have the right information, instruction, and skill, you may land up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a couple of essential factors that you should remember, before beginning with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a special sense. Do not begin a job if you are not interested, as this may land you in a terrible place.

2. Consider the primary reason for creating this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and analyze the time that you have, until you begin with a project.

4. Start projects which you’re able to complete. If you’re in the middle of a work, then it’s wise not to begin any project in any way.

How to Become a Master Woodworker From Your Own Home Woodworking Designs Furniture

If you maintain those essential points in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking jobs that you want to begin with. As a beginner, always select a job which has quite a basic build up or a very simple structure. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you find the techniques, you can always move into the next level of woodworking projects, like cabinets, sheds, and others. Beginning jobs should keyword be less complicated and less bothersome so you have a better knowledge of working with forests and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Designs Furniture

Tools would be the ways through which you will win the struggle of woodworking. A lot of men and women believe power tools are needs. However, for beginners, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters considerably easy for you. When you buy a hammer, always check the equilibrium between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws available in the market. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them can help you in advance woodworking. You can also purchase keyword power screwdrivers as they make the job much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for novices, but using it might make work easier for you in a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking jobs. Based on the sort of job you would like to complete, pricing could be determined. The easy the project, the less price it involves. However, at the beginning buying the tools will be a little hefty. Because of this, it is much better to resolve a budget first on the tools, then keyword on the project. Purchasing the basic tools will make certain you don’t need to purchase any more material aside from the timber ply.

Time and Instructions

Instructions are one of the principal things which every beginner should follow. It is like the woodworking Bible. Instructions guide is quite easy to comprehend the procedure, what to do and the way to do it. Time also plays an important role in the construction of woodworking projects. Woodworking projects demand time and so it’s crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to achieve success is proper preparation. With appropriate planning and a plan, it is likely to achieve success quickly. If you understand the purpose of woodworking, then the thing you need to build, the tools you need to own and the average time you can devote daily; then you are ready to go.

Conclusion, Woodworking Designs Furniture

These tips and education will create the woodworking projects and plans for novices fast to finish. Always ensure that you have all the essential tools, materials, area prepared. Read the instructions for building a product handy. Appropriate strategy and preparation can help you to earn a fantastic woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Woodworking Designs Furniture

Folks when trying to find a way to pass time or desire an alternate way to make money they generally turn to a hobby they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be very cautious when choosing which job to begin with because you will find jobs which may be too tough for a newbie. But don’t worry about that because we will provide you guidelines on the ideal way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you choose your project you have to know whether you have the available resources to work on such a job. Try not to invest a lot of cash on purchasing equipment when starting out, buy more equipment as you get more experience and become an expert carpenter. If you enjoy your hobby then there will not be any gap between the hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Designs Furniture

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking at home will provide you time to research different projects and learn a lot of things. That’s why it’s important to spend less money when starting out so that you can afford to make mistakes and at any time learning about different jobs.
It is very important you know more about the different types of wood available for making projects. Anticipate carpenters use different kinds of wood quality for decorating pieces, learning which type of wood they use can allow you to prepare the wood you will need for certain jobs you might choose to pursue.
As soon as you know the basics of wood selection and the usage of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in creating good jobs to fulfill your needs.

Woodworking Designs Furniture practice makes perfect so be sure that you practice your work every day if at all possible. Try out a lot of layouts utilizing a variety of tools so you may find the hang of working with the tools. When starting out you may earn a number of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Woodworking Designs Furniture

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimum number of tools and equipment. A little home workshop can produce a wide variety of simple projects which will help you develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you’ll do your woodworking, Depending on the dimensions of your home, you might be able to create a dedicated space into your woodworking tasks. This may be a reserved spot on your garage or in your basement. In some cases, a detached shed or outbuilding might be ideal to set up your first store. A heated store detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns located in the cellar draw up dust into the top levels of the home. Another benefit of detached workshops is, clearly, the noise level. It’s possible to work without disturbing the remainder of the family. A good compromise could be the garage of your property.

This might help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Woodworking Designs Furniture

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes that they include more space to function in. Woodworking Designs Furniture if you’re able to have a dedicated spot for a marathon all the better. Floor gear and bench top equipment can stay in position from project to project. If this setup is not impossible, at least try to make a chair area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. In the beginning, set up a bench area where you can shop and use the majority of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf beneath the seat to home your hands power tools and a pegboard over the bench to hang additional equipment. Put in a woodworking at one end of the bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Designs Furniture

The scope of your start-up equipment will be largely based on your budget. Whether you have got large financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, buy your quality tools in your local building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional ads. There are plenty of quality gently used tools out there which belong to people who embarked on that one molding project around the home or received tools as gifts that they won’t ever use. You can usually buy tools for these sellers for under half of the initial cost and save even more money should you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will require extra time and perhaps travel expenses. Weigh the advantages of traveling around town to save a couple added bucks on a cheap piece of equipment. The excess cost of travel and time in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum amount of hand gear yet generated sophisticated and complex pieces. Concentrate on developing your abilities with your start-up set of tools and prevent lamenting about the equipment you wished you had.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of critical safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw after the popular name, this may prove to be the most versatile tool in a start-up workshop. In fact, at the hands of an expert, a power hand saw can be employed to build an whole property. At some point, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get a quality brand saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you start your second job. After choosing the right saw install a quality blade. Most saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Begin with a hybrid . All these possess a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t only cut curves. It is perfect for cutting holes in wood too like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you do not need on your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Even though the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce range for overall work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface area. As you embark on the first few projects you’ll find your palm sander using a bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an extra source of 100 grit paper. You’ll get this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in wood pieces. {Begin with a standard number 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, good clamps are costly and it normally requires the novice woodworker a few years to accumulate a detailed set of wood clamps. Begin with a set of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure remains the same. Receive a pair of the maximum clamps that you could spend. You can contact them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the consumer to quickly open and close the jaws without tedious handle turning. The timber beamed surfaces on your vice will occasionally require replacement. I prefer to utilize soft pine in my vices which will not crush or damage many of the various forests that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of the most often used tools. Purchase a good quality name brand tape measure with a broad tape typically in the 25-foot range. Even though in your shop you might not use the tape at these spans, the bigger tape measures offer more rigid tapes that will not flop around and slide off the end of planks. Measuring when you are on your own will be a lot easier, and naturally, quality tape steps can endure for many decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will assist you in marking the right angles in addition to compound angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes on the way.

Adhesives: Not all glues are made equal. Stay away from inexpensive home brands sold as carpenter’s glue. The expense of glue through all of your jobs is a minor cost consideration. For that reason, it makes sense to go with the best. I also have found over time that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Woodworking Designs Furniture

The peaceful satisfaction of woodworking is an excellent adventure in this era of hurried lives, smartphones, and time-starved careers. With a minimal investment at the most basic tools and equipment, anyone can learn the profitable skills of his time-tested avocation and revel in job after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Amish furniture

Amish furniture is furniture manufactured by the Amish, primarily of Pennsylvania, Indiana, and Ohio. It is generally known as being made completely out of wood, usually without particle board or laminate. The styles most often used by the Amish woodworkers are generally more traditional in nature.

Amish furniture first gained attention in the 1920s, when early American folk art was "discovered", and dealers and historians placed great value upon the beauty and quality of the pieces. Many different styles of Amish furniture emerged.[1] The Jonestown School began in the late 18th century in Lebanon County, Pennsylvania. The Jonestown School is most widely known for painted blanket chests decorated with flowers on three panels. Examples of these chests are on display at both the Smithsonian Museum and the Metropolitan Museum of Art in New York City.

Another distinctive style of Amish furniture is the Soap Hollow School, developed in Soap Hollow, Pennsylvania. These pieces are often brightly painted in red, gold, and black. Henry Lapp was a furniture maker based in Lancaster County, Pennsylvania, and it is his designs that most closely resemble the furniture we think of today as Amish-made. He was one of the first to abandon the painted, Germanic-style influence in his furniture and opted for an undecorated, plain style, following more the styles of Welsh furniture making of the time. The order book he offered to his customers contained watercolor paintings of his pieces and is now in the Philadelphia Museum of Art. The record price for American folk-painted furniture was sold at Sotheby's in 1986. It was a tall case clock made in 1801 by Johannes Spitler that sold for $203,500.

Video: Woodworking Projects