Woodworking Drawing | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are after because all the ideas and projects Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for an extensive package, and he ended up creating a truly’complete’ woodworking resource.

Many might still appear unsure if they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it more difficult to make the right option. There are actually lots of things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. Those who are only getting started will find the thoughts and jobs in Ted’s bundle quite simple. No doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s simple step-by-step directions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will have the ability to find any job of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Nonetheless, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the net. Ted has done his best to guide them in every conceivable way he can, through easy to comprehend textual directions, clear pictures and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. Therefore, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools , but the concept is to purchase the crucial hand and power tools that beginners will need. You can always increase your arsenal as you get experience!

Woodworking Drawing Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. However, if you’re unsure about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Every month the writers in woodworking magazines do a story on the best way best to increase your woodworking craft. When it’s showing you how you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be heard each month. Next, is buying educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Drawing

If you’re a beginner and very interested in doing a DIY project for home afterward, woodworking could be fun. If you do not have the proper information, instruction, and ability, you may land up spending more time and money than you initially meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having mentioned, there are a couple of essential aspects that you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a project if you are not interested, because this might land you at a bad place.

2. Think of the main reason for creating this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and examine the time that you have, until you begin with a job.

4. Start projects that you’re able to complete. If you’re in the middle of a work, then it is better not to begin any project in any way.

Starting Your First Woodworking Shop Woodworking Drawing

If you maintain these essential things in your mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects that you wish to start with. As a newcomer, always select a job which has quite a basic construct up or a simple structure. A few simple to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always proceed to the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their resources. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Drawing

Tools are the ways through which you can win the battle of woodworking. Many men and women believe power tools are requires. But for beginners, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to work. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things much easy for you. When you buy a hammer, constantly assess the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws out there in the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them can help you in advance woodworking. You can even buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but using it would make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much simple.

8. Additional small and fundamental tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed cost on woodworking jobs. Dependent on the type of job that you would like to finish, pricing can be determined. The simple the project, the less cost it involves. However, at the very beginning buying the tools will probably be somewhat hefty. Therefore, it is much better to fix a budget first on the resources, then keyword on the undertaking. Buying the fundamental tools will make certain you don’t have to buy any more material other than the timber ply.

Time and Directions

Directions are one of the principal things which each and every newcomer should follow. It is like the woodworking Bible. Instructions guide is very easy to comprehend the procedure, what to do and the way to get it done. Time also has an important role in the building of woodworking jobs. Woodworking projects demand time and so it’s necessary for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or tricks that will make the work easy. But the most essential thing keyword that will help you to reach success is proper planning. With proper planning and a plan, it is likely to achieve success immediately. If you understand the objective of woodworking, the item that you want to build, the resources you require to own and the typical time you can devote daily; then you’re ready to go.

Conclusion, Woodworking Drawing

These strategies and education will make the woodworking projects and strategies for beginners fast to finish. Always ensure you have all the essential tools, materials, space prepared. Keep the instructions for building a product handy. Proper strategy and planning will allow you to earn a fantastic woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Woodworking Drawing

Folks when trying to find a way to pass time or want an alternative method to make money they generally turn to a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you have to be quite careful when choosing which job to begin with because you will find projects which may be too difficult for a newbie. But do not be concerned about that since we are going to provide you tips on the ideal means to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, therefore before you choose your project you have to know whether you have the available resources to work on such a project. Try not to spend a lot of cash on purchasing equipment when starting out, buy more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the hand and the normal hands.

Starting Your First Woodworking Shop Woodworking Drawing

Woodworking in your home will provide you time to explore unique jobs and find out a lot of things. That is why it’s important to spend less money when starting out so you can manage to make errors and at any time learning about various jobs.
It is very important that you know more about different types of wood available for making projects. Expect carpenters use several kinds of wood quality for decorating pieces, learning which kind of wood that they use will help you prepare the wood you’ll need for specific jobs you may choose to pursue.
Once you understand the basics of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in building good jobs to fulfill your needs.

Woodworking Drawing practice makes perfect so be sure you practice your work daily if at all possible. Try out a lot of layouts utilizing a variety of tools so you may get the hang of working with the tools. When starting out you may make a number of errors but with time you will find out how to properly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Woodworking Drawing

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimum number of tools and equipment. A little home workshop may produce a wide array of simple projects which will help you develop your creative and building abilities while rewarding you with practical and artistic wood products that you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s talk about where you’ll do your woodworking, based on the dimensions of your house, you might be able to create a dedicated space to your woodworking activities. This might be a reserved place in your garage or on your cellar. In some cases, a detached shed or outbuilding might be ideal to set up your very first shop. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably create dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops would be, of course, the noise level. You can work without disturbing the remainder of the household. A fantastic compromise could be the garage of your property.

This might help minimize the difficulties of dust and sound, however based on where you reside, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Woodworking Drawing

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to function in. Woodworking Drawing if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can stay in position from project to project. If this installation isn’t hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If possible plan for inevitable growth as you get more tools and equipment. At the beginning, establish a bench area where you are able to shop and use the majority of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf beneath the seat to house your hand power tools along with a pegboard above the bench to hang other gear. Install a woodworking at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Drawing

The scope of your start-up equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, purchase your quality tools in the regional building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative local advertisements. There are plenty of quality gently used tools out there which belong to people who embarked on that 1 molding project around the house or obtained tools as presents that they won’t ever utilize. You can usually buy tools for these sellers for under half the original price and save even more money if you make a package deal for all their unused equipment. Obviously, getting tools from private individuals will take extra time and perhaps travel expenses. Weigh the benefits of traveling across town to save a couple added dollars on a inexpensive piece of equipment. The excess cost of travel and time in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand gear yet generated sophisticated and intricate pieces. Focus on developing your skills with your start-up set of resources and prevent lamenting about the gear you wished you’d.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and influence safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing them all together in the event that you find them uneasy.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. With this setup I am shielding my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw following the popular name, this can prove to be the most versatile instrument in a startup workshop. In reality, at the hands of an expert, a power hand saw can be employed to build an whole property. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your next job. After selecting the proper saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Begin with a hybrid . All these have a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut curves. It is ideal for cutting holes in wood also like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more versatile but a excellent floor unit could be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the standard 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not need in your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning each drill bit to its potential slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Even though the most frequent, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce scope for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more suited for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you will probably update to a floor version disc and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on the first few projects you might find that your palm sander using a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper borders, sew high stains and fix any imperfections in wood bits. {Start with a standard amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, good clamps are expensive and it usually requires the novice woodworker a few years to collect a comprehensive set of wood clamps. Start with a set of long”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure remains the same. Receive a set of the longest clamps which you could afford. You can get in touch with them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A store vice installed in the end of the bench is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enable the consumer to rapidly open and close the limbs with no dull handle turning. The timber beamed surfaces in your vice will occasionally need replacement. I prefer to utilize soft pine in my vices which will not crush or damage lots of the various woods that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among your most often used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually from the 25-foot selection. Even though in your shop you might not be using the tape in these spans, the bigger tape measures offer more rigid tapes that will not flop around and slip off the end of boards. Assessing when you are by yourself will be a great deal easier, and of course, quality tape measures can last for many years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles in addition to chemical angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. The cost of adhesive through all your jobs is a little cost consideration. Therefore, it is sensible to go with the best. I have also found over the years that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Woodworking Drawing

The peaceful satisfaction of woodworking is an excellent adventure in this era of rushed lives, smart phones, and time-starved careers. With a minimum investment at the most rudimentary equipment and tools, everyone can learn the profitable abilities of his time-tested avocation and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools