Woodworking Forum | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they are after because most of the thoughts and jobs Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many might still appear unsure if they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more challenging to make the ideal option. There are actually lots of things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit out of Ted’s woodworking Package. Those who are just getting started will find the thoughts and jobs in Ted’s bundle quite easy. Without doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s easy step-by-step instructions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to locate any project of their choice in this bundle quite easily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who purchase it’ll be backed by a 60-day guarantee, so if this woodworking package fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Yet, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available throughout the net. Ted has done his very best to direct them in every conceivable way he could, through simple to comprehend textual instructions, clear pictures and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. So, it is definitely worth buying!

How to Become a Master Woodworker From Your Own Home Woodworking Forum

Woodworking is one hobby that can also be a rewarding profession if you love to work with your hands and construct beautiful pieces of furniture from timber. When you learn that the woodworking crafts and become a nice woodworking craftsman, you will have the ability to build all types of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. Woodworking Forum.

It takes time to become skilled at the craft of woodworking. The nice thing about working up to that expert craftsman degree is you’ll be able to create some really nice furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living room. It’ll be a topic of conversation whenever you have friends come over to see. They’ll ask: How can you make it? How long can it take to complete the project? What kind of tools did you use? Just how on earth did you make such a gorgeous piece of furniture? As you speak about your job, a sense of pride will come over you and also don’t be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Woodworking Forum

If you are thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Woodworking Forum.

Begin with an idea in your mind of what you would like to build then get a excellent woodworking project plan that’s geared toward beginners. There are several little woodworking projects for beginners available for purchase from online woodworking retailers. Obviously, you can begin with as expansive a woodworking plan as you pick. However, the chances are if you start out using a little woodworking job initially, you’ll have a better prospect of keyword finishing the project.

Your woodworking project plan should include some lists! Lists of: woodworking hardware, the quantity and variety of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about buying woodworking tools. Just buy what you want to finish your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking tools, but you can easily break the bank purchasing a lot of tools you may not utilize all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not forget that the wood glue and a brush to spread the wood glue! Of course, you will require a dry area to work and may require a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You can always add to your arsenal as you gain experience!

Woodworking Forum Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. But if you are unsure about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Every month the writers in woodworking magazines do a story about the best way to increase your woodworking craft. Whether it’s showing you the way to apply a finish to a completed job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodworking Forum

If you are just beginning and very enthusiastic about doing a DIY project for home then, woodworking could be fun. If you don’t have the proper information, instruction, and skill, you might land up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a couple of essential factors that you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first have to be very interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a job if you are not interested, as this may land you at a terrible place.

2. Consider the main reason for creating this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and examine the time you have, before you begin with a job.

4. Start jobs that you can complete. If you are in the midst of a work, then it is wise to not start any project in any way.

How to Become a Master Woodworker From Your Own Home Woodworking Forum

If you keep these essential points in your mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking jobs you wish to begin with. As a newcomer, always pick a job which has quite a basic construct up or a very simple structure. A few simple to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always move into the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning jobs should keyword be complicated and less bothersome so you have a better comprehension of working with forests and their resources. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Forum

Tools are the ways through which you can win the battle of woodworking. Many people think that power tools are requires. But for novices, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when mended with vises, provide ample space to work. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably easy for you. When you buy a hammer, always check the balance between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws available on the market. Choose a size that you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them will help you in advance woodworking. You can also purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill helps you make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much easy.

8. Additional small and basic tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed price on woodworking jobs. Dependent on the type of job that you want to complete, pricing can be determined. The easy the job, the less price it involves. But at the very beginning purchasing the tools will be somewhat hefty. Therefore, it is much better to resolve a budget on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t need to purchase any more material other than the wood ply.

Time and Instructions

Instructions are among the principal things that every newcomer should follow. It is like the woodworking Bible. Instructions manual is quite easy to comprehend the procedure, what to do and how to do it. Time also plays an important part in the building of woodworking projects. Woodworking projects require time and therefore it’s necessary for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most indispensable thing keyword that can help you to achieve success is proper planning. With appropriate planning and a strategy, it is possible to achieve success immediately. If you understand the purpose of woodworking, then the item that you want to construct, the tools you need in order to possess and the average time you can devote daily; then you are ready to go.

Conclusion, Woodworking Forum

All these tips and instruction is likely to create the woodworking projects and strategies for novices quickly to finish. Always make sure that you have all of the vital tools, materials, area prepared. Keep the instructions for building an item handy. Proper strategy and preparation can help you to earn a fantastic woodworking project for your home.

|

How to Become a Master Woodworker From Your Own Home Woodworking Forum

People if you’re trying to find a way to pass time or want an alternative method to generate money they generally turn into a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based company. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you have to be quite careful when choosing which project to start out with because there are jobs which can be too difficult for a newbie. But do not worry about that since we are going to give you tips on the right means to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, therefore before you choose your job you need to be aware of whether you have the available tools to work on such a job. Try not to invest a good deal of cash on buying equipment when starting out, buy more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Forum

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking at home will give you time to research unique projects and learn so many things. That’s why it’s very important to invest less money when starting out so that you can manage to make errors and at any time learning about different jobs.
It is very important you know more about different kinds of wood available for making projects. Anticipate carpenters utilize different types of wood quality for decorating pieces, learning what kind of wood that they use can help you prepare the wood you will need for certain jobs you may choose to pursue.
As soon as you understand the basics of wood choice and the use of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to satisfy your wants.

Woodworking Forum practice makes perfect so be sure that you practice your work every day if at all possible. Try out a lot of layouts utilizing a variety of tools so that you may get the hang of using the tools. When starting out you may earn a number of errors but with time you will learn how to correctly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Forum

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimal number of tools and equipment. A little home workshop may produce a broad variety of simple projects which will help you develop your creative and building abilities while rewarding you with practical and artistic wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us talk about where you’ll perform your woodworking, Depending on the dimensions of your home, you might be able to produce a dedicated space into your woodworking tasks. This may be a reserved spot in your garage or on your cellar. In some cases, a detached shed or outbuilding might be ideal to set up your first shop. A heated shop detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the upper levels of the home. Another advantage of detached workshops would be, clearly, the sound level. It’s possible to work without bothering the remainder of the family. A good compromise could be the garage of your home.

This might help minimize the problems of dust and sound, however depending on where you live, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Woodworking Forum

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they add more space to work in. Woodworking Forum if you can have a dedicated spot for a marathon all the better. Floor tools and bench top gear can stay in position from project to project. If this setup is not impossible, at least attempt to make a chair area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and gear. At the beginning, set up a seat area where you are able to shop and use most of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the bench to home your hand power tools and a pegboard above the seat to hang additional gear. Install a woodworking vice at one end of your bench on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Forum

The reach of your startup equipment will be largely based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools in your local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. There are plenty of quality lightly used programs out there which belong to people who embarked on that 1 molding project around the home or obtained tools as presents that they won’t ever use. You can usually purchase tools for these sellers for under half the original cost and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will take additional time and perhaps travel expenses. Weigh the benefits of traveling across town to save a few added bucks on a cheap piece of gear. The extra cost of time and travel in these situations is generally justified when buying large ticket items such as table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal quantity of hand equipment yet produced sophisticated and complex bits. Concentrate on developing your skills with your startup set of tools and avoid lamenting about the equipment you wished you had.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of critical safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a very simple ball cap with my ear muffs and eye protection. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw following the popular name, this may prove to be the most versatile tool in a start-up workshop. In fact, at the hands of an expert, a power hand saw could be employed to build an entire property. At some point, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a funding enables him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your second project. After choosing the right saw put in an excellent blade. Most skill saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid . These possess a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot only cut curves. It’s ideal for cutting holes in timber also like handle slots. At some point, you’re going to want to get a band saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the standard 3/8 inch model. Through tough lessons learned, I have discovered that buying quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their battery life will be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not need on your workshop. Buy an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning each drill piece to its potential slot in the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents happen. Although the most ordinary, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce scope for general work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface area. As you embark on the first few projects you’ll discover your palm sander using a little bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll find this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and correct any imperfections in timber bits. {Begin with a standard amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are expensive and it usually takes the beginner woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure remains the same. Get a set of the maximum clamps which you can afford. You can contact them for smaller adhesive jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer quick release mechanisms that enabled the user to rapidly open and close the limbs with no tedious handle turning. The wood clamping surfaces in your vice will periodically require replacement. I prefer to utilize soft walnut in my vices that will not crush or damage many of the various forests that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Purchase a good excellent name brand tape measure with a broad tape typically in the 25-foot range. Although in your shop you may not be using the tape at these lengths, the bigger tape steps offer more rigid tapes that won’t flop around and slip off the end of boards. Assessing when you’re by yourself will be a lot easier, and naturally, quality tape measures can last for several years.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will help you in marking the right angles as well as compound angles. Get the number three and two Robertson set. I discover that the Robertson format works best for many woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. The expense of adhesive through all your jobs is a little cost consideration. For that reason, it makes sense to go with the very best. I have also discovered over the years that I get the best results with both indoor and outdoor projects once I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Woodworking Forum

The peaceful gratification of woodworking is a wonderful adventure in this era of hurried lives, smartphones, and time-starved careers. With a minimal investment in the most rudimentary equipment and tools, everyone can learn the profitable skills of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Instructables

Instructables is a website specializing in user-created and uploaded do-it-yourself projects, currently owned by Autodesk. It was created by Eric Wilhelm and Saul Griffith and launched in August 2005. Instructables is dedicated to step-by-step collaboration among members to build a variety of projects. Users post instructions to their projects, usually accompanied by visual aids, and then interact through comment sections below each Instructable step as well in topic forums.

After graduating from the Media Lab at MIT, Wilhelm and Griffith founded Squid Labs, an engineering and technology company specializing in design and consulting. Instructables started as an internal Squid Labs project, which later spun out as an independent company with Wilhelm as its CEO. Wilhelm still regularly contributes to the site.

The original content focused mostly on such projects as building electronic or mechanical devices to solve common problems around the home. The scope of the project has expanded to include a larger array of categories, including Food, Living, Outside, Tech, Play and Workshop. Sponsored categories are sometimes added for companies to advertise a specific topic on the site.

Video: Woodworking Tools