Woodworking Gift Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re after because most of the thoughts and jobs Ted’s source are simple to understand and simple. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive package, and he ended up making a really’complete’ woodworking source.

Many might still appear unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it more difficult to make the right option. There are in fact many things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. People that are just getting started will find the thoughts and jobs in Ted’s package quite easy. Without doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s simple step-by-step directions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers are going to have the ability to locate any job of their choice within this bundle quite readily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it’ll be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large dimensions. Nonetheless, with a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available throughout the net. Ted has done his very best to direct them in every possible way he can, through simple to comprehend textual directions, clear images and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find within. Therefore, it is definitely worth buying!

How to Become a Master Woodworker From Your Own Home Woodworking Gift Projects

Woodworking is one hobby that could also be a rewarding career if you like to work with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you will be able to construct all types of furniture, (table, beds, and chairs), effortlessly. You can then sell your finished woodworking jobs and make a handsome profit. Woodworking Gift Projects.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman level is you’ll have the ability to create some really wonderful furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It’ll be a topic of conversation whenever you have friends come over to visit. They will ask: How did you make it? Where did you get the woodworking programs? How long did it take to finish the project? What type of wood did you use? What type of tools did you use? Just how on earth did you make such a gorgeous piece of furniture? As you discuss your job, a sense of pride will encounter you and don’t be surprised if your friends ask you to make one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Gift Projects

If you are thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Woodworking Gift Projects.

Start with a concept in mind of what you want to construct and then get a really good woodworking project plan that’s geared toward novices. There are numerous little woodworking projects for beginners available for sale from online woodworking retailers. A few woodworking plan suggestions to get you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to mention a few. Of course, you can begin with as expansive a woodworking program as you choose. However, the chances are if you begin with a little woodworking project at first, you’ll get a better prospect of keyword completing the project.

Your woodworking project plan should include some lists! Lists of: woodworking hardware, the quantity and type of wood required, and the essential hand tools and power tools to finish the project. Note: A word of caution about purchasing woodworking tools. Just buy what you want to finish your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools aren’t cheap. The beginner needs good woodworking tools, but you can easily break the bank buying a great deal of tools you may not utilize all that often. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget the wood glue and a brush to spread the wood glue! Of course, you’ll need a dry area to work and may need a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools , but the concept is to buy the crucial hand and power tools that beginners will need. You can always increase your toolbox as you get experience!

Woodworking Gift Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to complete your project. However, if you’re not certain about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Each month the authors in woodworking magazines do a story about how to improve your woodworking craft. Whether it is showing you the way to apply an end to a finished job, or how to make a mortise and tenon joint, something new could be learned each month. Next, is buying instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Gift Projects

If you’re just beginning and very interested in doing a DIY project for home then, woodworking could be interesting. If you don’t have the proper information, instruction, and skill, you may wind up spending more time and money than you initially intended to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential aspects that you should remember, before starting with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a project if you’re not interested, because this might land you in a bad place.

2. Consider the main reason behind creating this woodworking project. Choose the uses of the item you are making.

3. Consider your abilities and analyze the time you have, before you begin with a job.

4. Start jobs which you can finish. If you are in the middle of some work, then it’s wise to not begin any project in any way.

Starting Your First Woodworking Shop Woodworking Gift Projects

If you keep these essential points in your mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much because it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to opt for the woodworking jobs that you wish to begin with. As a beginner, always pick a project which has quite a basic construct up or a very simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you find these techniques, you can always move to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less bothersome so that you have a better comprehension of working with forests and their tools. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Gift Projects

Tools are the means through which you can win the struggle of woodworking. A lot of men and women think that power tools are requires. But for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when mended with vises, offer ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things considerably easy for you. When you buy a hammer, constantly check the equilibrium between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws available on the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you ahead of time woodworking. You might also purchase keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. However, this is not a tool for beginners, but having it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills can make the task much simple.

8. Additional small and fundamental tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed cost on woodworking projects. Based on the sort of project you want to complete, pricing can be determined. The simple the project, the less price it involves. But at the beginning buying the tools will probably be a little hefty. Because of this, it is better to resolve a budget on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t have to purchase any more material other than the wood ply.

Time and Directions

Directions are among the principal things which each and every beginner should follow. Instructions guide is very simple to comprehend the procedure, what to do and how to do it. It keyword is a systematic guide for completing the project. Time also plays an important role in the building of woodworking jobs. Woodworking projects demand time and so it’s crucial for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword which will help you to reach success is proper preparation. With appropriate planning and a strategy, it is possible to achieve success quickly. If you understand the objective of woodworking, then the item that you want to construct, the tools you require in order to own and the typical time you can give every day; then you are all set to go.

Conclusion, Woodworking Gift Projects

These tips and education will make the woodworking projects and plans for beginners fast to complete. Always ensure that you have all the vital tools, materials, space prepared. Read the instructions for building a product handy. Proper strategy and preparation will help you to earn a great woodworking project for your home.

|

How to Become a Master Woodworker From Your Own Home Woodworking Gift Projects

People if you’re looking for a way to pass time or desire an alternate way to generate money they generally turn to a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you need to be quite cautious when choosing which job to begin with because there are jobs that can be too tough for a beginner. But do not worry about that because we will give you guidelines on the ideal means to start woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, so before you choose your job you need to be aware of whether you’ve got the available resources to work on such a project. Try not to spend a lot of cash on purchasing gear when starting out, buy more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any gap between the artistic hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Gift Projects

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking in your home will give you time to explore unique jobs and learn a lot of things. That’s why it’s important to spend less money when starting out so you can manage to make errors and at any time learning about different projects.
It’s very important that you know more about the different kinds of wood available for making projects. Expect carpenters utilize different kinds of wood quality for decorating bits, learning which kind of wood that they use will allow you to prepare the wood you’ll need for certain jobs you might want to pursue.
Once you understand the fundamentals of wood choice and the use of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in creating good projects to satisfy your wants.

Woodworking Gift Projects practice makes perfect so make sure you practice your work every day if possible. Try out a lot of layouts using a variety of tools so you may find the hang of working with the tools. When starting out you may make a number of errors but with time you will find out how to properly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Gift Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum number of tools and equipment. A small home workshop may generate a wide array of simple projects which will help you develop your creative and construction skills while rewarding you with artistic and practical wood products which you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us talk about where you’ll perform your woodworking, Depending on the size of your home, you might be able to produce a dedicated space to your woodworking tasks. This may be a reserved place in your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to set up your first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably produce dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields found in the basement draw dust up into the top levels of the home. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without bothering the remainder of the family. A fantastic compromise might be the garage of your property.

This can help minimize the difficulties of dust and noise, however based on where you live, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Woodworking Gift Projects

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Woodworking Gift Projects if you can have a dedicated place for a workshop all the greater. Floor tools and bench top gear can stay in position from project to project. If this setup is not hopeless, at least attempt to create a bench area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. In the start, set up a bench area where you can shop and use the majority of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf below the bench to house your hands power tools and a pegboard over the bench to hang other equipment. Put in a woodworking at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Gift Projects

The reach of your start-up equipment will be largely based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, then buy your quality tools in the local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. There are an abundance of quality gently used tools out there that belong to individuals who stumbled on that 1 molding project around the home or received tools as presents which they will never utilize. You can usually purchase tools for these sellers for less than half of the original cost and save even more money if you make a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will take extra time and possibly travel expenditures. Weigh out the advantages of traveling across town to save a few added dollars on a cheap piece of gear. The excess cost of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal amount of hand gear yet produced sophisticated and complex bits. Concentrate on developing your skills with your startup set of resources and prevent lamenting about the gear you wished you had.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and affect security. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You can avoid wearing them all together if you find them uneasy.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this setup I am shielding my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw after the popular name, this can prove to be the most flexible tool in a start-up workshop. In reality, in the hands of a professional, a power hand saw could be employed to construct an whole property. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your next job. After selecting the right saw install an excellent blade. Most skill saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Start with a hybrid . These possess a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot just cut corners. It’s perfect for cutting holes in wood too like handle slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more versatile but a quality floor unit could be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the conventional 3/8 inch model. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their battery life will be bad and to make things worse keyless chucks come loose and slip often. This is one annoyance you don’t need on your workshop. Purchase an assortment of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its potential slot in the holder after each use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries happen. Even though the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head usually comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce scope for overall work and a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle pretty much any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on the first few projects you might discover your palm sander using just a little bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an extra source of 100 grit paper. You’ll get this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in timber bits. {Begin with a typical amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, superior clamps are costly and it usually requires the novice woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the maximum clamps which you could afford. You can contact them for smaller glue jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of the bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enabled the user to rapidly open and close the jaws with no tedious handle rotation. The timber clamping surfaces in your vice will occasionally require replacement. I would rather use soft walnut in my vices which will not crush or damage many of the various woods that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among your most frequently used tools. Buy a good quality name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your shop you may not be using the tape in these lengths, the larger tape measures offer more rigid tapes which will not flop around and slip off the ending of boards. Assessing when you’re by yourself will be a lot easier, and naturally, quality tape steps can last for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will need additional sanding.

What is Woodworking? The Benefits of Woodworking Woodworking Gift Projects

Woodworking is known as the building or the production of items from wood. It is possible to create a lot of unique objects from woodworking and these objects can be as large as gazebos or as small as wooden toys. No matter how big or small your personal project maybe you will be quite likely to accomplish that aim with woodworking. Additionally, woodworking has lots of private as well as emotional benefits! In the following guide, I am going to briefly identify some of these benefits for you.

Woodworking as a Career:

Individuals who build things from wood are generally known keyword as carpenters. Carpenters can work on a variety of woodworking projects and job types. For example, some carpenters own their carpentry business and these folks have the luxury to place their work hours. This benefit allows carpenters the opportunity to spend additional time with their families and also have less job strain. Raising kids is a very tough task regardless of what way you approach the task! For a carpenter who owns his or her own company, this job might not be as hard since that person will have more time to become a part of his or her child’s lifetime. By playing a bigger part in the life of your child you’ll be having a greater impact on the sort of character that child develops into, which is a massive concern for any loving parent. Besides these benefits, carpentry may also have health benefits as well.

How to Become a Master Woodworker From Your Own Home Woodworking Gift Projects

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a lot. This causes more physical activity, which leads to better physical health. Maintaining your body physically healthy is really important and keyword can assist in preventing the occurrence of various ailments in the foreseeable future life. By being physically healthy you can decrease chances you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of giving birth to a number of other illnesses.

Woodworking Gift Projects, Do It Yourself Woodworking Saves Money:

I always feel like that I paid way too much when I visit home improvement shops and purchase patio furniture, and I am sure that I’m not the only person that has felt this way! A successful business owner once advised me to constantly increase the sales price of a product to double everything you’ve obtained it for. This way, you can always decrease the product to 50 percent off and still come out without acquiring any losses. This sounds like it might be exactly the exact same tactic that home improvement shops use in selling their own wooden furniture solutions. Regardless, there is a way which it is possible to get around paying the additional money and that’s to do with building it yourself. Fortunately, there are several really good woodworking products that offer thousands of detailed woodworking keyword plans for hundreds of different project types. So, you can really build anything you want or see in almost any home improvement store. Doing something yourself does take a little bit of time but time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

CustomMade

CustomMade is an online custom jeweler. Until 2015, the business operated as an online marketplace connecting customers with independent artisans (called "custom makers") who produce custom-designed furniture, jewelry, home décor, and other personalized items.[1][2] CustomMade is the world's first and largest online seller of custom products.[3][4][5] They have 3,500 custom makers registered on the site and have raised a total of $7.65 million in venture funding.[6] On May 21, 2015, the business was acquired by Wayfair (NYSE: W) for an undisclosed sum after having raised $25.65MM in venture funding. In May 2017, it was announced that founder Seth Rosen had re-purchased the business out of foreclosure in partnership with Western Technology Investment (WTI) to focus on building the custom jewelry business.[7][8][9]

Co-founders Michael Salguero and Seth Rosen met as undergraduates at Boston University, where both had a passion for custom-made shirts, belts, and pants.[10][11][12] The two founders had careers in real estate and were looking for more exciting work.[13][14][15] In January 2009, Salguero and Rosen bought the custommade.com URL for $150,000 from a woodworker who had owned and run the site since 1996.[13][14][16][17] At the time of the purchase, the site hosted around 350 makers paying a small subscription fee to be on the site. The site was generating about $35,000 a year in subscription sales.[13] According to Salguero, the new company became based on two principles:

The founders spent much of the first year rebuilding the site's interface and visiting woodworking and craft fairs to sign up custom makers with the site.[10] In January 2009, they raised a $400,000 seed round.[20] Early versions of CustomMade.com drew visitors, but only a small number of those visitors ordered items.[21] CustomMade redesigned the site with help from Google Ventures and within a week, increased the number of paying projects by 200 percent.[21] From 2009 to 2010, the number of visitors to the site tripled to a total of 1.5 million, and in 2010, CustomMade earned $350,000 in revenue.[1]

Video: Woodworking Tools