Woodworking Ideas | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking when they’re after because all the thoughts and jobs Ted’s source are simple to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the right choice. There are in fact lots of things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. People that are only getting started will find the ideas and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is demanded; however, they will find it really easy to follow Ted’s easy step-by-step directions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to be able to find any job of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it will be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large dimensions. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that can be found throughout the net. Ted has done his best to guide them in every possible way he can, through simple to understand textual instructions, clear images and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking projects they will find within. So, it’s certainly worth buying!

The Benefits of Woodworking Woodworking Ideas

Woodworking is 1 hobby that could also be a rewarding profession if you like to work with your hands and build exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you will be able to construct all types of furniture, (beds, table, and chairs), effortlessly. After that you can sell your finished woodworking jobs and make a handsome profit. Woodworking Ideas.

It takes time to become skilled at the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will be able to build some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living room. It’ll be a topic of conversation whenever you have friends come over to see. They will ask: How can you create it? How long can it take to complete the job? What kind of tools did you use? How on earth did you make such a beautiful piece of furniture? As you discuss your job, a sense of pride will encounter you and do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Ideas

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Woodworking Ideas.

Begin with a concept in mind of what you want to build and then get a excellent woodworking project plan that is geared toward beginners. There are several little woodworking projects for novices available for sale from online woodworking merchants. Obviously, you can start out with as grand a woodworking plan as you choose. However, the odds are if you begin using a small woodworking job initially, you’ll get a better chance of keyword finishing the project.

Your woodworking project plan must incorporate some lists! Lists of: woodworking equipment, the quantity and variety of wood needed, and the required hand tools and power tools to finish the undertaking. Note: A word of warning about buying woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you may not use all that often. When you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t overlook the wood glue and a brush to spread the wood glue! Of course, you will require a dry area to work and might need a set of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools that beginners will need. You may always add to your arsenal as you gain experience!

Woodworking Ideas Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. But if you are not certain about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Every month the authors in woodworking publications do a story on how best to improve your woodworking craft. When it is showing you the way you can apply an end to a finished project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is purchasing instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Ideas

If you’re a beginner and very interested in doing a DIY project for home afterward, woodworking can be interesting. If you don’t have the proper information, education, and skill, you might wind up spending more time and money than you initially intended to spend. As a beginner woodworker, you need to have time and the correct tools. Having said, there are a couple of essential factors you should remember, before beginning with any woodworking project.

1. If you are just beginning, you should first have to be very interested in woodworking. Creating something new with your own hands is a special sense. Don’t begin a job if you are not interested, as this may land you at a bad place.

2. Consider the primary reason for creating this woodworking project. Choose the uses of this item you’re making.

3. Consider your skills and analyze the time that you have, before you start with a project.

4. Start jobs that you’re able to complete. If you’re in the midst of a work, then it’s better to not begin any project in any way.

How to Become a Master Woodworker From Your Own Home Woodworking Ideas

If you maintain those vital points in mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much because it takes effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking jobs that you wish to begin with. As a newcomer, always select a project which has a very basic construct up or a very simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always move into the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning projects should keyword be less complicated and less bothersome so that you have a better knowledge of working with forests and their resources. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Ideas

Tools are the ways whereby you can win the battle of woodworking. A lot of men and women believe power tools are requires. But for novices, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when mended with vises, provide ample space to work. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you buy a hammer, constantly assess the equilibrium between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws available in the marketplace. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Having all of them can help you in advance woodworking. You might also purchase keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this isn’t a tool for beginners, but using it might make work simpler for you in a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s not any fixed cost on woodworking projects. Based on the type of project that you want to finish, pricing can be set. The easy the project, the less cost it involves. But at the beginning purchasing the tools will be a little hefty. Therefore, it is much better to fix a budget first on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you do not have to buy any more material other than the timber ply.

Time and Instructions

Directions are among the principal things that every beginner should follow. Instructions manual is quite easy to understand the process, what to do and how to get it done. Time also has a significant role in the building of woodworking projects. Woodworking projects require time and therefore it’s crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. But the most indispensable thing keyword that will allow you to achieve success is proper planning. With appropriate planning and a plan, it is likely to achieve success immediately. If you know the purpose of woodworking, the thing you want to build, the tools you require to own and the average time you can devote every day; then you are all set to go.

Conclusion, Woodworking Ideas

All these strategies and education will create the woodworking projects and plans for novices fast to complete. Always make sure that you have all the essential tools, materials, area ready. Read the instructions for constructing an item handy. Proper strategy and planning will allow you to earn a great woodworking job for your property.

|

Starting Your First Woodworking Shop Woodworking Ideas

Folks when trying to find a way to pass time or desire an alternative way to generate money they usually turn to a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you need to be quite careful when choosing which project to begin with because there are jobs which can be too difficult for a beginner. But don’t worry about that since we are going to provide you tips on the ideal way to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your job you need to be aware of whether you have the available tools to work on that project. Try not to spend a lot of money on purchasing gear when starting out, purchase more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no difference between the hand and the hands.

How to Become a Master Woodworker From Your Own Home Woodworking Ideas

To keep yourself updated you must disseminate with different brands tools and woods. Woodworking at home will provide you time to research unique projects and learn a lot of things. That is why it’s important to spend less money when starting out so you can afford to make mistakes and at any time learning about different projects.
It’s extremely important you know more about different kinds of wood available for making projects. Expect carpenters use different kinds of wood quality for decorating bits, learning which kind of wood they use will help you prepare the wood you will need for specific projects you may choose to pursue.
As soon as you know the fundamentals of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in building good jobs to satisfy your needs.

Woodworking Ideas practice makes perfect so be sure that you practice your work every day if possible. Try out a lot of designs utilizing various tools so you may find the hang of using the tools. When starting out you may earn a range of mistakes but with time you will learn how to correctly use them and create quality projects.

|

The Benefits of Woodworking Woodworking Ideas

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimal amount of tools and equipment. A small home workshop can produce a broad array of simple projects that will help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us discuss where you’ll do your woodworking, Depending on the size of your home, you might have the ability to produce a dedicated space into your woodworking activities. This might be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your first store. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably produce dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without bothering the rest of the family. A good compromise could be the garage of your property.

This can help decrease the problems of dust and sound, however based on where you live, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Ideas

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Woodworking Ideas if you’re able to have a dedicated place for a workshop all the greater. Floor gear and bench top gear can stay in position from project to project. If this installation is not hopeless, at least attempt to create a bench area where equipment can be stored and pulled out as needed. If possible plan for inevitable growth as you get more tools and gear. In the beginning, set up a seat area where you are able to store and use the majority of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf beneath the seat to house your hands power tools along with a pegboard above the bench to hang additional gear. Install a woodworking vice at one end of your bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Ideas

The scope of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools in your local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative local ads. There are an abundance of quality gently used tools out there which belong to individuals who stumbled on that 1 molding project around the house or received tools as gifts which they won’t ever utilize. You can usually buy tools for all these sellers for under half of the original price and save even more money if you create a bundle deal for all their unused equipment. Obviously, getting tools from private people will take extra time and possibly travel expenses. Weigh the advantages of traveling around town to save a couple extra dollars on a cheap piece of gear. The extra cost of travel and time in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand gear yet produced sophisticated and complex bits. Concentrate on developing your abilities with your start-up set of resources and avoid lamenting about the gear you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect security. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. With this set up I am shielding my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the popular name, this may end up being the most versatile instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw can be used to build an whole house. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you even start your second job. After choosing the right saw put in a quality blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid . All these have a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut curves. It is ideal for cutting holes in wood too like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more versatile but a quality floor unit could be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have found that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you don’t want on your workshop. Purchase an range of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot in the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce range for overall work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle just about any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you will probably update to a floor version disc and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander using just a bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets with an extra source of 100 grit paper. You’ll get that this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in wood bits. {Begin with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it usually requires the novice woodworker a few years to accumulate a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the longest clamps which you can afford. You can get in touch with them for smaller glue jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the consumer to quickly open and close the jaws without dull handle turning. The wood clamping surfaces in your vice will occasionally require replacement. I would rather utilize soft walnut in my vices that won’t crush or damage lots of the various woods that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of your most frequently used tools. Purchase a good quality name brand tape measure with a wide tape usually in the 25-foot selection. Even though in your store you may not use the tape in these spans, the bigger tape steps offer more rigid tapes which will not flop around and slip off the end of planks. Assessing when you’re by yourself will be a great deal simpler, and of course, quality tape steps can last for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles as well as compound angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find the Robertson format works best for most woodworking projects and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. The expense of adhesive through all your jobs is a minor cost consideration. For that reason, it is sensible to decide on the very best. I have also found over time that I get the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Woodworking Ideas

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of hurried lives, smart phones, and time-starved livelihood. With a minimal investment in the most basic tools and equipment, everyone can learn the rewarding abilities of his time-tested hobby and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Router (woodworking)

A router is a hand tool or power tool that a worker uses to rout (hollow out) an area in relatively hard material like wood or plastic. Routers are mainly used in woodworking, especially cabinetry. Routers are typically handheld or fastened cutting end-up in a router table.

The hand tool type of router is the original form. It is a specialized type of hand plane with a broad base and a narrow blade that projects well beyond its base plate (giving it the nickname old woman's tooth). The power tool form of router with an electric-motor-driven spindle is now the more common form. The hand tool version is now often called a router plane, and for some tasks, still provides a few advantages over the power tool. Some workers consider the electric router one of the most versatile woodworking power tools.[1] CNC wood routers implement the advantages of CNC (Computer Numerical Control).

Related to the router is a smaller, lighter version designed specifically for trimming laminates. It can be used for smaller general routing work. For example, with an appropriate jig it can be used for recessing door hinges and recessing lock faceplates. Even rotary tools can be used as routers when the right bits and accessories (such as a plastic router base) are attached.

Video: Woodworking Projects