Woodworking Jobs | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities that make it the”#1 woodworking Resource” and a few of those attributes alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they are after because most of the ideas and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years exploring so that he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking resource.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are actually lots of things that set Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those that are only getting started will find the thoughts and jobs in Ted’s bundle quite easy. No doubt, intricate carpentry is involved; nonetheless, they will find it really easy to follow Ted’s simple step by step directions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice within this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who purchase it will be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available throughout the internet. Ted has done his best to guide them in every possible way he can, through simple to understand textual directions, clear pictures and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find within. Therefore, it’s definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Jobs

Woodworking is 1 hobby that can also be a rewarding career if you love to work together with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to construct all types of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. Woodworking Jobs.

It takes time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you’ll have the ability to create some really nice furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living room. It will be a subject of conversation when you have friends come over to see. They will ask: How can you create it? How long can it take to complete the job? What type of tools did you use? How on earth did you create such a gorgeous item of furniture? As you speak about your work, a feeling of pride will come over you and do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Jobs

If you are thinking you are too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it is ideal for beginners!

Where to Begin in Woodworking? Woodworking Jobs.

Begin with a concept in your mind of what you would like to build and then get a excellent woodworking project plan that’s geared toward novices. There are numerous little woodworking projects for beginners available for sale from online woodworking merchants. A few woodworking plan suggestions to get you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a few. Obviously, you can begin with as grand a woodworking program as you pick. On the other hand, the chances are if you begin using a small woodworking project initially, you will get a better chance of keyword completing the project.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the quantity and type of wood required, and the essential hand tools and power tools to finish the project. Note: A word of warning about purchasing woodworking tools. Just buy what you need to complete your instant or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools are not cheap. The beginner needs good woodworking gear, but you can easily break the bank buying a lot of tools you might not utilize all that frequently. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t forget the wood glue and a brush to spread the wood glue! Obviously, you’ll require a dry place to work and might require a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more woodworking hand tools and much more woodworking power tools here, but the concept is to purchase the essential hand and power tools that novices will need. You may always add to your arsenal as you get experience!

Woodworking Jobs Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. But if you are unsure about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Every month the writers in woodworking publications do a story on how best to increase your woodworking craft. Whether it’s showing you how to apply a finish to a finished project, or how to make a mortise and tenon joint, something new could be learned each month. Next, is purchasing educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Jobs

If you are just beginning and very interested in doing a DIY project for house then, woodworking can be fun. If you do not have the right information, education, and ability, you may wind up spending more money and time than you originally intended to spend. As a novice woodworker, you need to have time and the correct tools. Having said, there are a few essential factors that you need to remember, before beginning with any woodworking project.

1. If you’re a beginner, you must first need to be very interested in woodworking. Making something new with your own hands is a particular feeling. Do not start a job if you are not interested, as this may land you at a bad location.

2. Consider the main reason behind making this woodworking project. Decide on the uses of this item you are making.

3. Consider your skills and examine the time you have, until you begin with a project.

4. Start projects that you can complete. If you are in the middle of some work, then it’s better not to start any project at all.

How to Become a Master Woodworker From Your Own Home Woodworking Jobs

If you maintain these vital points in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much because it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking jobs that you wish to begin with. As a beginner, always pick a project which has a very basic construct up or a very simple construction. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always move into the next level of woodworking projects, like cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so you have a better comprehension of working with forests and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Jobs

Tools would be the ways whereby you can win the struggle of woodworking. Many men and women believe power tools are needs. However, for novices, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to work. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things much simple for you. When you purchase a hammer, always check the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws available in the marketplace. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them can help you in advance woodworking. You can even buy keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. However, this is not a tool for novices, but having it might make work easier for you at a subsequent stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills will make the job much easy.

8. Additional small and basic tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking projects. Dependent on the sort of project that you would like to finish, pricing could be set. The easy the job, the less cost it involves. But at the beginning buying the tools will probably be somewhat hefty. Because of this, it’s much better to resolve a budget on the resources, then keyword on the undertaking. Buying the fundamental tools will ensure that you don’t have to buy any more material other than the wood ply.

Time and Instructions

Directions are among the principal things which each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is quite easy to understand the procedure, what to do and how to do it. Time also has a significant role in the construction of woodworking projects. Woodworking projects require time and therefore it is crucial for a novice to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most indispensable thing keyword that can allow you to achieve success is proper preparation. With proper planning and a plan, it’s likely to achieve success quickly. If you understand the purpose of woodworking, the item you want to build, the tools you need in order to own and the typical time you can give daily; then you are all set to go.

Conclusion, Woodworking Jobs

All these tips and education will create the woodworking projects and strategies for novices quickly to finish. Always make sure that you have all the vital tools, materials, space ready. Read the instructions for constructing an item handy. Appropriate strategy and preparation can help you to make a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Jobs

Folks if you’re looking for a way to pass time or want an alternative method to make money they usually turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you need to be quite cautious when choosing which project to start out with because there are projects which may be too difficult for a beginner. But do not worry about that because we will give you guidelines on the ideal means to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, therefore before you choose your job you need to know if you have the available resources to work on such a project. Try not to spend a lot of cash on buying equipment when starting out, buy more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll be no gap between the hand and the hands.

How to Become a Master Woodworker From Your Own Home Woodworking Jobs

Woodworking in your home will provide you time to research unique jobs and learn a lot of things. That’s why it’s very important to spend less money when starting out so you can manage to make errors and at any time learning about different jobs.
It is very important you know about different kinds of wood available for creating projects. Anticipate carpenters utilize several types of wood quality for decorating pieces, learning which type of wood that they use will help you prepare the wood you’ll need for certain jobs you might choose to pursue.
Once you understand the fundamentals of wood choice and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to satisfy your wants.

Woodworking Jobs practice makes perfect so be sure that you practice your work daily if possible. Try out lots of layouts using a variety of tools so that you can find the hang of using the tools. When starting out you can earn a number of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Woodworking Jobs

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum amount of gear and equipment. A small home workshop can produce a broad array of simple projects that will allow you to develop your creative and construction skills while rewarding you with artistic and practical wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you will do your woodworking, based on the dimensions of your house, you may have the ability to produce a dedicated space to your woodworking tasks. This might be a reserved place on your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably produce dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the upper levels of the home. Another benefit of detached workshops is, of course, the sound level. You can work without bothering the remainder of the family. A fantastic compromise could be the garage of your property.

This can help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Woodworking Jobs

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they include more space to function in. Woodworking Jobs if you can have a dedicated place for a workshop all the greater. Floor gear and bench top equipment can remain in position from project to project. If this installation is not hopeless, at least try to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and equipment. At the start, establish a seat area where you can shop and use the majority of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the bench to house your hands power tools and a pegboard above the bench to hang additional equipment. Put in a woodworking at one end of your seat on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Jobs

The scope of your startup equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, purchase your quality tools at the regional construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other regional ads. You will find plenty of quality gently used programs out there that belong to people who embarked on that 1 molding project around the house or obtained tools as presents which they will never utilize. You can usually buy tools for these sellers for under half the initial price and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require extra time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a few extra bucks on a cheap piece of gear. The excess expense of travel and time in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand equipment yet generated sophisticated and intricate bits. Focus on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this set up I am protecting my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw following the popular brand name, this can prove to be the most versatile instrument in a startup workshop. In fact, in the hands of a professional, a power hand saw could be used to construct an whole property. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your next job. After selecting the right saw install a quality blade. Most saws come with a starter blade of lower quality even if they are a good saw. Keep this blade for a backup and install a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot just cut curves. It’s ideal for cutting holes in wood also like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more flexible but a quality floor unit can be costly. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the conventional 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you don’t need on your workshop. Purchase an range of quality carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after every use. Last, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop accidents occur. Even though the most frequent, hammer accidents are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for general work and a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled mind tips. These types of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you will likely update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface space. As you embark on the first few projects you’ll discover your palm sander with a little bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get that this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in wood pieces. {Start with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, good clamps are costly and it usually takes the novice woodworker a few years to collect a comprehensive set of timber clamps. Start with a set of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a pair of the maximum clamps which you can spend. You can get in touch with them for smaller adhesive jobs and expand them to their full length for larger jobs.

Shop Vice: A shop vice installed in the end of the seat is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer quick release mechanisms that enable the user to quickly open and close the limbs without dull handle rotation. The timber clamping surfaces on your vice will periodically need replacement. I prefer to utilize soft pine in my vices which will not crush or damage lots of the different forests that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of your most often used tools. Buy a good excellent name brand tape measure with a wide tape typically in the 25-foot range. Even though in your store you may not use the tape in these spans, the larger tape measures provide more rigid tapes which won’t flop around and slip off the end of boards. Measuring when you are by yourself will be a great deal easier, and naturally, quality tape steps can endure for many years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will assist you in marking the right angles as well as compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and fixing small mistakes along the way.

Adhesives: Not all glues are made equal. Stay away from inexpensive home brands marketed as carpenter’s glue. The cost of glue through all of your jobs is a minor cost consideration. For that reason, it is sensible to decide on the best. I also have discovered over the years that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade glue. All these resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Woodworking Jobs

The peaceful satisfaction of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved careers. With a minimum investment at the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested hobby and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Woodworking joints

Joinery is a part of woodworking that involves joining together pieces of timber or lumber, to produce more complex items. Some wood joints employ fasteners, bindings, or adhesives, while others use only wood elements. The characteristics of wooden joints - strength, flexibility, toughness, appearance, etc. - derive from the properties of the materials involved and the purpose of the joint. Therefore, different joinery techniques are used to meet differing requirements. For example, the joinery used to construct a house can be different from that used to make puzzle toys, although some concepts overlap.

This must be taken into account when joining wood parts together, otherwise the joint is destined to fail. Gluing boards with the grain running perpendicular to each other is often the reason for split boards, or broken joints. Furniture from the 18th century, while made by master craftsmen, did not take this into account. The result is this masterful work suffers from broken bracket feet, which was often attached with a glue block which ran perpendicular to the base pieces. The glue blocks were fastened with both glue and nails, resulting in unequal expansion and contraction between the pieces. This was also the cause of splitting of wide boards, which were commonly used during that period.

In modern woodworking it is even more critical, as heating and air conditioning cause major changes in the moisture content of the wood. All woodworking joints must take these changes into account, and allow for the resulting movement.[3]

Video: Woodworking Tools