Woodworking Machinery | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they are following because most of the ideas and jobs Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many might still appear unsure if they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the ideal option. There are actually lots of things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People that are only getting started will discover the thoughts and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; however, they will find it really easy to follow Ted’s easy step by step instructions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will have the ability to find any project of their choice within this bundle quite readily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who buy it will be backed by a 60-day warranty, so when this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large dimensions. Nonetheless, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that are available across the internet. Ted has done his very best to direct them in every conceivable way he can, through simple to understand textual directions, clear pictures and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and more woodworking power tools , but the concept is to buy the crucial hand and power tools that novices will need. You can always increase your toolbox as you get experience!

Woodworking Machinery Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. However, if you are unsure about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Each month the writers in woodworking magazines do a story about how best to increase your woodworking craft. When it’s showing you how you can apply an end to a completed job, or how to make a mortise and tenon joint, something new could be heard every month. Next, is purchasing instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Machinery

If you are a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking could be fun. If you do not have the proper information, instruction, and ability, you may land up spending more time and money than you initially intended to spend. As a novice woodworker, you want to have time and the correct tools. Having mentioned, there are a few essential aspects that you should keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first have to be very interested in woodworking. Making something new with your hands is a particular sense. Do not begin a job if you are not interested, as this may land you at a terrible place.

2. Consider the main reason for making this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time you have, before you start with a job.

4. Start jobs which you’re able to finish. If you are in the middle of a work, then it’s better not to start any project in any way.

Finding Woodworking Projects and Plans for Beginners Woodworking Machinery

If you maintain these vital things in your mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking projects you wish to begin with. As a newcomer, always select a project that has quite a basic build up or a simple construction. Some simple to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you get hold of the techniques, you can always move to the next level of woodworking projects, such as cupboards, sheds, and others. Beginning jobs should always keyword be less complicated and less frustrating so that you have a better comprehension of working with woods and their tools. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Woodworking Machinery

Tools would be the means through which you will win the battle of woodworking. Many people think that power tools are requires. However, for novices, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things much simple for you. When you purchase a hammer, constantly check the balance between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws available in the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you ahead of time woodworking. You might even purchase keyword energy screwdrivers as they make the work much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills will make the job much simple.

8. Other small and basic tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed price on woodworking jobs. Based on the type of project that you want to finish, pricing could be determined. The easy the project, the less cost it involves. However, at the beginning purchasing the tools will be a little hefty. Because of this, it is much better to fix a budget first on the tools, then keyword on the undertaking. Buying the fundamental tools will make certain you do not have to purchase any more material other than the timber ply.

Time and Directions

Directions are one of the principal things that every newcomer should follow. It is like the woodworking Bible. Instructions guide is quite easy to understand the process, what to do and how to get it done. Time also has an important role in the construction of woodworking projects. Woodworking projects demand time and therefore it is crucial for a novice to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword that can help you to achieve success is proper planning. With appropriate planning and a plan, it is likely to achieve success quickly. If you know the objective of woodworking, the item you need to construct, the resources you require to possess and the average time it’s possible to give daily; then you are ready to go.

Conclusion, Woodworking Machinery

These tips and instruction is likely to make the woodworking projects and plans for novices fast to complete. Always ensure you have all of the vital tools, materials, space prepared. Keep the instructions for building a product handy. Proper strategy and planning can allow you to make a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Machinery

People when looking for a way to pass time or desire an alternate way to make money they usually turn into a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be very cautious when choosing which project to start out with since there are projects which may be too difficult for a newbie. But don’t worry about that because we are going to provide you tips on the ideal means to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, therefore before you choose your project you need to be aware of whether you’ve got the available resources to work on such a job. Try not to invest a good deal of money on buying gear when starting out, buy more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any difference between the artistic hand as well as the normal hands.

The Benefits of Woodworking Woodworking Machinery

Woodworking in your home will provide you time to research unique projects and find out so many things. That’s why it’s very important to spend less money when starting out so that you can afford to make mistakes and at any time learning about different projects.
It’s very important that you know about different kinds of wood available for creating projects. Expect carpenters use different types of wood quality for decorating pieces, learning which type of wood they use will allow you to prepare the wood you will need for specific jobs you may choose to pursue.
Once you know the fundamentals of wood selection and the usage of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to fulfill your needs.

Woodworking Machinery practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of designs utilizing various tools so that you can find the hang of using the tools. When starting out you may make a number of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

Starting Your First Woodworking Shop Woodworking Machinery

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimum number of tools and equipment. A small home workshop may generate a broad array of simple projects which can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products that you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s discuss where you will do your woodworking, Depending on the dimensions of your home, you might be able to produce a dedicated space into your woodworking activities. This might be a reserved place in your garage or on your basement. Sometimes, a detached shed or outbuilding might be ideal to set up your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably create dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the top levels of the home. Another advantage of detached workshops would be, of course, the noise level. It’s possible to work without disturbing the rest of the household. A good compromise could be the garage of your property.

This might help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage layout might not be practical during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Woodworking Machinery

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they include more space to work in. Woodworking Machinery if you can have a dedicated spot for a workshop all the greater. Floor gear and bench top equipment can stay in place from project to project. If this setup is not hopeless, at least try to create a bench area where equipment could be saved and pulled out as necessary. If possible plan for inevitable growth as you get more tools and equipment. In the beginning, establish a seat area where you can shop and use the majority of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. That will let you work comfortably while standing. Add a sturdy shelf beneath the bench to home your hand power tools and a pegboard over the seat to hang other equipment. Install a woodworking vice at one end of your bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Machinery

The reach of your start-up equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, purchase your quality tools in the local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional advertisements. There are an abundance of quality lightly used tools out there that belong to people who embarked on that one molding project around the house or obtained tools as gifts which they won’t ever use. You can usually purchase tools for all these sellers for less than half the original price and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and possibly travel expenses. Weigh the benefits of traveling around town to save a few added bucks on a cheap piece of gear. The extra expense of travel and time in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal quantity of hand equipment yet produced sophisticated and intricate bits. Concentrate on developing your skills with your startup set of tools and prevent lamenting about the gear you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next piece of crucial safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I’m keeping the dust from my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw after the popular name, this may end up being the most flexible tool in a startup workshop. In reality, in the hands of an expert, a power hand saw can be used to construct an entire house. At some point, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your next job. After selecting the proper saw install a quality blade. Most saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Begin with a hybrid . These possess a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut corners. It’s perfect for cutting holes in timber also like manage slots. Eventually, you’re going to want to get a band saw. Bandsaws are even more versatile but a quality floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their battery life tends to be poor and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want in your workshop. Buy an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its potential slot in the holder after each use. Lastly, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The head usually comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These types of hammers are more appropriate for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you’ll find that your palm sander using a little bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll get that this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in theory, these tools enable you to taper borders, sew high stains and fix any imperfections in timber pieces. {Start with a typical number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally requires the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a set of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure remains the same. Get a set of the maximum clamps which you could afford. You may contact them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enabled the user to quickly open and close the limbs without tedious handle rotation. The timber clamping surfaces on your vice will occasionally require replacement. I prefer to use soft pine in my vices that will not crush or damage lots of the different woods that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among the most frequently used tools. Purchase a good excellent name brand tape measure with a broad tape usually from the 25-foot range. Although in your store you might not be using the tape at these spans, the larger tape measures offer more rigid tapes which will not flop around and slide off the end of boards. Assessing when you’re by yourself will be a lot simpler, and naturally, quality tape measures can last for several decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will assist you in marking the right angles in addition to chemical angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. The expense of adhesive through all of your projects is a little cost consideration. Therefore, it makes sense to decide on the best. I have also discovered over the years that I get the best results with both indoor and outdoor jobs when I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Woodworking Machinery

The peaceful satisfaction of woodworking is an excellent experience in this era of hurried lives, smartphones, and time-starved careers. With a minimal investment in the most basic equipment and tools, anyone can learn the profitable abilities of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking machine

A Woodworking machine is a wood machine that is intended to process wood. These machines are usually powered by electric motors and are used extensively in woodworking. Sometimes grinding machines (for grinding woodworking down in to smaller pieces a wood worker shall be for but also tools) are also considered a part of woodworking machinery

These machines are used both in small-scale commercial production of timber products and by hobbyists. Most of these machines may be used on solid timber and on composite products. Machines can be divided into the bigger stationary machines where the machine remains stationary while the material is moved over the machine, and hand-held power tools, where the tool is moved over the material.

Video: Woodworking Tools