Woodworking Materials | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those qualities alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re following because all the ideas and projects Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so that he could collect enough material for an extensive package, and he ended up making a really’complete’ woodworking source.

Many may still seem unsure if they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it more challenging to make the right choice. There are actually lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s package quite easy. Without doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to locate any project of their choice within this package quite readily, even though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who buy it’ll be endorsed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large size. Yet, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that can be found across the internet. Ted has done his best to direct them in every possible way he could, through easy to comprehend textual instructions, clear pictures and even movies too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it’s definitely worth buying!

Starting Your First Woodworking Shop Woodworking Materials

Woodworking is one hobby that could also be a rewarding career if you like to work with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll be able to construct all types of furniture, (table, beds, and chairs), with ease. After that you can sell your completed woodworking jobs and make a handsome profit. Woodworking Materials.

It takes time to become skilled at the craft of woodworking. The nice thing about working up to this expert craftsman level is you will be able to build some really wonderful furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living room. It’ll be a subject of conversation when you have friends come over to visit. They will ask: How can you create it? Just how long can it take to complete the project? What type of wood did you use? What type of tools did you use? How on earth did you create such a beautiful item of furniture? As you discuss your work, a sense of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Woodworking Materials

If you’re thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it is perfect for beginners!

Where to begin in Woodworking? Woodworking Materials.

Start with an idea in mind of what you would like to build and then get a excellent woodworking project plan that is geared toward beginners. There are numerous little woodworking projects for novices available for sale from online woodworking merchants. Obviously, you can start out with as grand a woodworking plan as you pick. However, the odds are if you start out with a little woodworking project initially, you will get a better chance of keyword completing the job.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the amount and variety of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of warning about purchasing woodworking tools. Just buy what you need to complete your immediate or upcoming project. This is important especially if you are a beginner and just beginning. Tools aren’t affordable. The newcomer needs good woodworking tools, but you can easily break the bank buying a lot of tools you may not utilize all that frequently. When you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t overlook that the wood glue and a brush to spread the wood glue! Obviously, you’ll require a dry place to work and may require a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools here, but the concept is to buy the essential hand and power tools which novices will need. You can always add to your toolbox as you get experience!

Woodworking Materials Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Each month the writers in woodworking magazines do a story about the best way best to improve your woodworking craft. When it is showing you how to apply an end to a completed job, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Woodworking Materials

If you’re just beginning and very enthusiastic about doing a DIY project for home then, woodworking could be interesting. If you don’t have the proper information, education, and ability, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have time and the correct tools. Having said, there are a couple of essential aspects that you should keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Making something new with your hands is a particular feeling. Do not start a project if you are not interested, because this might land you at a terrible location.

2. Consider the main reason for creating this woodworking project. Decide on the uses of this item you’re making.

3. Consider your skills and examine the time that you have, before you start with a project.

4. Start projects that you can finish. If you are in the middle of a work, then it’s wise not to begin any project in any way.

Finding Woodworking Projects and Plans for Beginners Woodworking Materials

If you keep those vital points in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking jobs that you want to begin with. As a newcomer, always pick a job which has quite a basic build up or a very simple structure. A few simple to begin projects include, bird feeder, benches, shelves, etc.. The moment you find the techniques, you could always proceed to the next level of woodworking jobs, like cabinets, sheds, and others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better comprehension of working with forests and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Materials

Tools are the ways whereby you can win the struggle of woodworking. A lot of people think that power tools are needs. However, for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when mended with vises, provide ample space to work. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things much easy for you. When you buy a hammer, constantly assess the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws available on the marketplace. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them will help you in advance woodworking. You might even buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but using it would make work easier for you in a later stage.

7. Drill – Drill helps you make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the job much simple.

8. Other small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking jobs. Dependent on the type of project you want to finish, pricing can be set. The easy the project, the less price it involves. But at the very beginning purchasing the tools will probably be a little hefty. Because of this, it’s much better to fix a budget on the resources, then keyword on the project. Purchasing the fundamental tools will ensure that you don’t have to purchase any more material aside from the wood ply.

Time and Directions

Instructions are among the principal things that each and every newcomer should follow. Instructions guide is quite easy to understand the process, what to do and the way to get it done. Time also plays a significant part in the building of woodworking projects. Woodworking projects require time and so it is necessary for a novice to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword which can help you to achieve success is proper planning. With proper planning and a plan, it’s likely to achieve success quickly. If you understand the purpose of woodworking, then the item that you want to build, the resources you need in order to possess and the average time it’s possible to give daily; then you’re ready to go.

Conclusion, Woodworking Materials

All these tips and instruction is likely to make the woodworking projects and strategies for novices fast to complete. Always ensure that you have all the vital tools, materials, area ready. Read the instructions for constructing an item handy. Appropriate strategy and preparation will help you to make a fantastic woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Materials

Folks if you’re looking for a way to pass time or want an alternative method to make money they usually turn to a hobby that they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you need to be very careful when choosing which project to begin with since you will find projects that can be too difficult for a beginner. But don’t be concerned about that since we will give you tips on the right means to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, therefore before you choose your job you need to be aware of whether you’ve got the available resources to work on that job. Try not to invest a good deal of cash on buying equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any difference between the artistic hand as well as the normal hands.

Starting Your First Woodworking Shop Woodworking Materials

Woodworking at home will give you time to explore unique jobs and learn so many things. That is why it’s very important to spend less money when starting out so that you can manage to make mistakes and at any time learning about different jobs.
It’s extremely important you know more about different types of wood available for creating projects. Expect carpenters use different kinds of wood quality for decorating bits, learning what type of wood that they use will allow you to prepare the wood you’ll need for specific jobs you may choose to pursue.
As soon as you know the fundamentals of wood selection and the use of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good jobs to satisfy your needs.

Woodworking Materials practice makes perfect so be sure that you practice your work every day if at all possible. Try out lots of designs using various tools so that you can find the hang of using the tools. When starting out you may earn a range of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

Starting Your First Woodworking Shop Woodworking Materials

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimum amount of gear and equipment. A little home workshop may generate a broad variety of simple projects that will help you develop your creative and building abilities while rewarding you with artistic and practical wood products that you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s talk about where you’ll do your woodworking, Depending on the size of your house, you may have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved place in your garage or on your basement. Sometimes, a detached shed or outbuilding might be perfect to set up your very first shop. A heated store detached from your house offers one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the cellar draw up dust into the top levels of the house. Another benefit of detached workshops would be, of course, the sound level. It’s possible to work without bothering the rest of the family. A good compromise could be the garage of your property.

This can help decrease the problems of dust and noise, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Woodworking Materials

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Woodworking Materials if you’re able to have a dedicated place for a workshop all the better. Floor gear and bench top equipment can stay in place from project to project. If this setup isn’t hopeless, at least attempt to make a chair area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. In the start, set up a bench area where you can store and use the majority of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Insert a sturdy shelf beneath the seat to home your hands power tools and a pegboard above the bench to hang additional equipment. Put in a woodworking vice at one end of your bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Materials

The scope of your start-up equipment will be largely based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, buy your quality tools at the local building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional ads. There are plenty of quality lightly used tools out there that belong to individuals who embarked on that 1 molding project around the house or obtained tools as presents that they will never use. You can usually buy tools for these sellers for less than half of the initial price and save even more money if you create a bundle deal for all their unused equipment. Of course, getting tools from private individuals will require extra time and perhaps travel expenses. Weigh out the benefits of traveling around town to save a few extra dollars on a cheap piece of gear. The extra expense of travel and time in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum amount of hand gear yet generated sophisticated and intricate bits. Focus on developing your abilities with your startup set of tools and prevent lamenting about the gear you wished you’d.
Here’s a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and influence security. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of critical safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire faster when exposed to high noise levels. Last, put on a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this may end up being the most versatile instrument in a startup workshop. In reality, at the hands of an expert, a power hand saw could be used to build an whole property. Eventually, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you start your next job. After choosing the proper saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t just cut corners. It’s perfect for cutting holes in wood too like manage slots. Eventually, you’ll want to get a band saw. Bandsaws are much more flexible but a excellent floor unit can be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the standard 3/8 inch version. Down the road, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their battery life will be bad and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you do not need in your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after each use. Lastly, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop accidents occur. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more suited for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle just about any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you will probably upgrade to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll find that your palm sander using just a bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an extra source of 100 grit paper. You’ll get that this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools allow you to taper borders, flatten high spots and fix any imperfections in timber pieces. {Start with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a few years to collect a comprehensive set of wood clamps. Start with a pair of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the maximum clamps which you can spend. You may contact them for smaller adhesive jobs and expand them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of the bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enable the user to quickly open and close the jaws with no tedious handle turning. The wood beamed surfaces on your vice will occasionally require replacement. I would rather use soft pine in my vices which will not crush or damage many of the different woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most frequently used tools. Buy a fantastic excellent name brand tape measure with a wide tape usually from the 25-foot selection. Although in your shop you might not use the tape at these lengths, the larger tape steps provide more rigid tapes which will not flop around and slip off the ending of boards. Assessing when you are by yourself will be a great deal easier, and of course, quality tape steps can last for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will assist you in marking the ideal angles as well as compound angles. Additionally, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing little mistakes along the way.

Adhesives: Not all glues are made equal. Stay away from cheap house brands marketed as carpenter’s glue. The expense of glue through all of your jobs is a little cost consideration. For that reason, it is sensible to go with the very best. I have also found over time that I get the best results with both indoor and outdoor projects once I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Woodworking Materials

The peaceful satisfaction of woodworking is an excellent experience in this era of rushed lives, smartphones, and time-starved careers. With a minimum investment at the most rudimentary equipment and tools, everyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking joints

Joinery is a part of woodworking that involves joining together pieces of timber or lumber, to produce more complex items. Some wood joints employ fasteners, bindings, or adhesives, while others use only wood elements. The characteristics of wooden joints - strength, flexibility, toughness, appearance, etc. - derive from the properties of the materials involved and the purpose of the joint. Therefore, different joinery techniques are used to meet differing requirements. For example, the joinery used to construct a house can be different from that used to make puzzle toys, although some concepts overlap.

This must be taken into account when joining wood parts together, otherwise the joint is destined to fail. Gluing boards with the grain running perpendicular to each other is often the reason for split boards, or broken joints. Furniture from the 18th century, while made by master craftsmen, did not take this into account. The result is this masterful work suffers from broken bracket feet, which was often attached with a glue block which ran perpendicular to the base pieces. The glue blocks were fastened with both glue and nails, resulting in unequal expansion and contraction between the pieces. This was also the cause of splitting of wide boards, which were commonly used during that period.

In modern woodworking it is even more critical, as heating and air conditioning cause major changes in the moisture content of the wood. All woodworking joints must take these changes into account, and allow for the resulting movement.[3]

Video: Woodworking Projects