Woodworking Plans And Templates | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking when they are following because all the thoughts and projects Ted’s source are simple to comprehend and simple. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive bundle, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more difficult to make the right option. There are actually lots of things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s bundle quite simple. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will be able to find any job of their choice within this package quite easily, even though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who purchase it’ll be backed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large size. Nonetheless, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available throughout the internet. Ted has done his very best to guide them in every conceivable way he can, through simple to understand textual instructions, clear images and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and much more woodworking power tools here, but the concept is to buy the essential hand and power tools that beginners will need. You can always add to your toolbox as you gain experience!

Woodworking Plans And Templates Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the authors in woodworking publications do a story about how to improve your woodworking craft. When it is showing you the way you can apply an end to a finished job, or how to create a mortise and tenon joint, something new could be learned each month. Next, is buying instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Plans And Templates

If you’re just beginning and very interested in doing a DIY job for home then, woodworking could be interesting. If you don’t have the right information, instruction, and ability, you may land up spending more money and time than you originally intended to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having said, there are a couple of essential factors you should remember, before starting with any woodworking project.

1. If you are a beginner, you should first have to be somewhat interested in woodworking. Creating something new with your own hands is a particular feeling. Don’t begin a job if you’re not interested, because this might land you in a terrible location.

2. Consider the primary reason for creating this woodworking project. Decide on the uses of the thing you are making.

3. Consider your abilities and examine the time that you have, until you begin with a project.

4. Start projects that you can finish. If you’re in the midst of a work, then it is better to not begin any project in any way.

Finding Woodworking Projects and Plans for Beginners Woodworking Plans And Templates

If you maintain those essential points in your mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much as it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you wish to begin with. As a beginner, always pick a project which has quite a basic build up or a simple structure. A few simple to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you can always move to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their tools. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Woodworking Plans And Templates

Tools would be the ways whereby you can win the battle of woodworking. Many people think that power tools are needs. But for novices, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you purchase a hammer, constantly assess the balance between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there on the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You might also purchase keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but using it might make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the job much simple.

8. Other small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking jobs. Based on the type of job that you would like to complete, pricing could be determined. The easy the project, the less cost it involves. However, at the beginning purchasing the tools will be somewhat hefty. Therefore, it is much better to resolve a budget first on the resources, then keyword on the project. Buying the basic tools will ensure that you do not have to purchase any more material other than the wood ply.

Time and Directions

Instructions are among the primary things that each and every newcomer should follow. Instructions guide is quite easy to comprehend the procedure, what to do and how to do it. It keyword is a systematic manual for finishing the project. Time also has a significant role in the construction of woodworking projects. Woodworking projects demand time and therefore it is necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or tricks that will make the work easy. But the most indispensable thing keyword that can allow you to reach success is proper preparation. With proper planning and a strategy, it is possible to achieve success immediately. If you know the objective of woodworking, the thing that you need to construct, the tools you require in order to possess and the average time you can give every day; then you are all set to go.

Conclusion, Woodworking Plans And Templates

All these tips and education will make the woodworking projects and strategies for novices quickly to complete. Always make sure that you have all the essential tools, materials, space ready. Read the instructions for building a product handy. Proper strategy and preparation can help you to make a great woodworking project for your home.

|

Starting Your First Woodworking Shop Woodworking Plans And Templates

People if you’re looking for a way to pass time or want an alternative method to generate money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be quite cautious when choosing which project to begin with because you will find projects which may be too tough for a beginner. But do not worry about that since we will give you guidelines on the ideal way to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, therefore before you pick your project you need to be aware of whether you have the available resources to work on such a job. Try not to spend a lot of cash on purchasing equipment when starting out, buy more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any difference between the artistic hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Plans And Templates

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will give you time to research different jobs and learn so many things. That’s why it’s very important to invest less money when starting out so that you can manage to make errors and at any time learning about various projects.
It’s extremely important that you know more about the different kinds of wood available for making jobs. Anticipate carpenters utilize different types of wood quality for decorating bits, learning which type of wood they use will allow you to prepare the wood you’ll need for specific projects you might want to pursue.
Once you understand the basics of wood choice and the usage of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to fulfill your wants.

Woodworking Plans And Templates practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of designs using a variety of tools so you can get the hang of using the tools. When starting out you may make a range of errors but with time you will learn how to correctly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Plans And Templates

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimum amount of gear and equipment. A small home workshop can generate a wide array of simple projects which will allow you to develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us discuss where you’ll perform your woodworking, based on the dimensions of your house, you might have the ability to create a dedicated space into your woodworking activities. This may be a reserved place in your garage or in your basement. In some cases, a detached shed or outbuilding might be perfect to set up your first store. A heated shop detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably create dust which travels into the living area of your house. This is very true in homes with forced air heating systems where cold air yields located in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops would be, of course, the noise level. It’s possible to work without bothering the remainder of the family. A fantastic compromise might be the garage of your home.

This might help decrease the difficulties of dust and noise, however depending on where you reside, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Woodworking Plans And Templates

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Woodworking Plans And Templates if you can have a dedicated place for a workshop all the greater. Floor tools and bench top gear can remain in place from project to project. If this setup is not hopeless, at least try to make a chair area where equipment could be saved and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. At the beginning, establish a bench area where you are able to store and use most of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. Insert a sturdy shelf beneath the seat to home your hand power tools and a pegboard above the bench to hang additional equipment. Put in a woodworking vice at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Plans And Templates

The reach of your start-up equipment will be mostly based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, buy your quality tools in the local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional ads. There are plenty of quality gently used programs out there that belong to people who embarked on that 1 molding job around the home or obtained tools as gifts which they won’t ever utilize. You can usually buy tools for these sellers for less than half of the original price and save even more money should you make a package deal for all their unused equipment. Obviously, getting tools from private individuals will require extra time and possibly travel expenses. Weigh out the benefits of traveling around town to save a few added dollars on a cheap piece of gear. The extra cost of time and travel in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum amount of hand equipment yet generated sophisticated and complex bits. Concentrate on developing your skills with your start-up set of tools and prevent lamenting about the gear you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and affect security. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of crucial safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire quicker when exposed to high sound levels. Select effective hearing protection that you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. I prefer a simple ball cap along with my ear muffs and eye protection. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the popular name, this can prove to be the most flexible tool in a startup workshop. In fact, at the hands of a professional, a power hand saw can be used to build an entire property. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you start your next project. After choosing the right saw put in a quality blade. Most saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid blade. All these have a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument cannot only cut curves. It’s perfect for cutting holes in timber also like handle slots. Eventually, you’re going to want to get a band saw. Bandsaws are even more versatile but a quality floor unit could be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the standard 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that purchasing quality, in this case, is more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their battery life will be bad and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you don’t need in your workshop. Purchase an assortment of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning every drill bit to its potential slot in the holder after each use. Last, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents happen. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce range for general work and a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll probably upgrade to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on the first few projects you’ll find that your palm sander using just a little bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough planks with 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get that this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper edges, sew high stains and correct any imperfections in timber pieces. {Begin with a standard amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Start with a pair of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure is still the same. Get a pair of the longest clamps that you could spend. You may contact them for smaller glue jobs and enlarge them to their entire length for larger projects.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enable the consumer to rapidly open and close the limbs without tedious handle turning. The wood clamping surfaces in your vice will occasionally require replacement. I would rather utilize soft pine in my vices that won’t crush or damage many of the various forests that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among the most often used tools. Purchase a fantastic excellent name brand tape measure with a wide tape usually from the 25-foot range. Even though in your shop you might not be using the tape in these spans, the larger tape steps provide more rigid tapes that will not flop around and slide off the ending of planks. Assessing when you are by yourself will be a lot easier, and naturally, quality tape measures can last for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need additional sanding.

What is Woodworking? The Benefits of Woodworking Woodworking Plans And Templates

Woodworking is known as the construction or the production of items from wood. It is possible to create a great deal of different objects from woodworking and these items can be as large as gazebos or as small as wooden toys. However large or small your private project maybe you will be quite likely to accomplish that aim with woodworking. In addition, woodworking has many private in addition to emotional benefits! In this article, I am going to briefly identify some of these benefits for you.

Woodworking as a Career:

People who build things from wood are usually known keyword as carpenters. Carpenters can work on a variety of woodworking jobs and job types. For example, a few carpenters own their carpentry company and these individuals have the luxury to set their job hours. This advantage allows carpenters the chance to spend additional time with their own families and have less job stress. Raising kids is a really tough task no matter what way you approach the endeavor! To get a carpenter who owns their own business, this job might not be as hard since that individual will have more time to become a part of her or his child’s lifetime. By playing a bigger role in the life of your child you will be having a larger impact on the sort of character that child develops into, which is a massive concern for any loving parent. Besides such benefits, carpentry can also have health benefits as well.

Finding Woodworking Projects and Plans for Beginners Woodworking Plans And Templates

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a lot. This results in more physical activity, which results in better physical health. Maintaining your body physically fit is really important and keyword will help prevent the occurrence of various illnesses in the foreseeable future life. By being physically healthy you can reduce chances that you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of having a number of different illnesses.

Woodworking Plans And Templates, Do It Yourself Woodworking Saves Money:

I always feel as I paid way too far when I visit home improvement shops and buy patio furniture, and I am sure that I am not the only person who has felt this way! A successful small business owner once told me to always increase the sales price of a commodity to double everything you’ve got it for. This way, you can always decrease the merchandise to 50 percent away and come out without acquiring any losses. This sounds like it might be exactly the same tactic that home improvement shops use in selling their wooden furniture solutions. Regardless, there’s a way that it is possible to get around paying the additional money and that’s to do with building it yourself. Luckily, there are several really excellent woodworking products offering thousands of comprehensive woodworking keyword plans for countless different job types. So, you can really build anything you want or see in almost any home improvement store. Doing something yourself does require a bit of time but the time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools