Woodworking Plans And Tools | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking when they are following because all the ideas and jobs Ted’s source are easy to understand and easy. Ted McGrath spent two years exploring so that he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the right choice. There are in fact lots of things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. People who are just getting started will find the thoughts and projects in Ted’s package quite easy. No doubt, intricate carpentry is involved; however, they will find it really easy to follow Ted’s simple step by step instructions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any job of their choice within this bundle quite readily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it’ll be endorsed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large dimensions. Yet, with a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that can be found across the net. Ted has done his best to guide them in every possible way he can, through simple to comprehend textual directions, clear pictures and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find inside. Therefore, it is certainly worth buying!

Finding Woodworking Projects and Plans for Beginners Woodworking Plans And Tools

Woodworking is 1 hobby that could also be a rewarding profession if you like to work with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you will have the ability to construct all kinds of furniture, (table, beds, and chairs), with ease. After that you can sell your completed woodworking projects and make a handsome profit. Woodworking Plans And Tools.

It takes time to become skilled at the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you’ll have the ability to create some really wonderful furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit in your living room. It’ll be a subject of conversation when you have friends come over to see. They’ll ask: How did you make it? How long did it take to finish the project? What type of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you speak about your work, a sense of pride will encounter you and do not be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Plans And Tools

If you are thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to Begin in Woodworking? Woodworking Plans And Tools.

Start with an idea in your mind of what you would like to construct and then get a really good woodworking project plan that is geared toward beginners. There are numerous little woodworking projects for beginners available for purchase from online woodworking retailers. Obviously, you can start out with as expansive a woodworking plan as you pick. On the other hand, the odds are if you start out with a little woodworking job initially, you will get a better prospect of keyword finishing the project.

Your woodworking project plan must include some lists! Lists of: woodworking equipment, the quantity and variety of wood required, and the essential hand tools and power tools to finish the project. Note: A word of caution about purchasing woodworking tools. Just buy what you want to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t affordable. The beginner needs good woodworking gear, but you can easily break the bank buying a great deal of tools you may not use all that often. If you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not forget that the wood glue and a brush to spread the wood adhesive! Of course, you’ll require a dry place to work and might require a pair of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools here, but the idea is to purchase the crucial hand and power tools which beginners will need. You may always increase your toolbox as you get experience!

Woodworking Plans And Tools Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you are unsure about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the authors in woodworking publications do a story about the best way best to improve your woodworking craft. When it is showing you how you can apply an end to a finished project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is purchasing instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Woodworking Plans And Tools

If you are just beginning and very enthusiastic about doing a DIY project for house afterward, woodworking could be interesting. If you do not have the proper information, instruction, and ability, you might wind up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have time and the appropriate tools. Having said, there are a few essential aspects you should remember, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be very interested in woodworking. Making something new with your hands is a particular sense. Don’t start a project if you are not interested, because this might land you at a bad place.

2. Consider the primary reason for making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and examine the time that you have, until you start with a project.

4. Start jobs that you’re able to finish. If you’re in the middle of a work, then it is better not to begin any project at all.

Starting Your First Woodworking Shop Woodworking Plans And Tools

If you keep those vital things in mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much because it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects you want to start with. As a newcomer, always select a job that has a very basic build up or a very simple construction. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you can always move to the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning projects should keyword be less complicated and less frustrating so you have a better knowledge of working with forests and their tools. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Woodworking Plans And Tools

Tools would be the ways whereby you can win the battle of woodworking. A lot of men and women believe power tools are requires. But for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to work. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much easy for you. When you buy a hammer, constantly check the equilibrium between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there on the marketplace. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you in advance woodworking. You might even purchase keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it would make work easier for you at a later stage.

7. Drill – Drill helps you make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed cost on woodworking projects. Dependent on the sort of project you would like to complete, pricing could be set. The easy the job, the less price it involves. However, at the very beginning buying the tools will probably be somewhat hefty. Therefore, it is much better to resolve a budget on the resources, then keyword on the project. Buying the fundamental tools will ensure that you do not need to buy any more material other than the wood ply.

Time and Directions

Directions are among the primary things that every newcomer should follow. Instructions manual is quite easy to understand the procedure, what to do and the way to do it. It keyword is a systematic manual for completing the project. Time also plays a significant role in the construction of woodworking projects. Woodworking projects demand time and therefore it is necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword which can help you to achieve success is proper preparation. With appropriate planning and a strategy, it’s possible to achieve success quickly. If you understand the objective of woodworking, then the item that you want to construct, the resources you need to possess and the average time you can give daily; then you are all set to go.

Conclusion, Woodworking Plans And Tools

These strategies and instruction will create the woodworking projects and strategies for novices fast to finish. Always ensure you have all of the essential tools, materials, space prepared. Keep the instructions for constructing an item handy. Proper strategy and preparation will help you to make a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Woodworking Plans And Tools

People if you’re looking for a way to pass time or desire an alternative method to make money they generally turn into a hobby they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It is very exciting to do and anyone can begin.

When doing woodworking at home there are lots of projects one can consider. When starting out you have to be very cautious when choosing which job to begin with because you will find projects that may be too difficult for a newbie. But don’t worry about that because we will provide you tips on the ideal means to start woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, therefore before you choose your job you need to know whether you’ve got the available resources to work on that job. Try not to invest a good deal of cash on buying equipment when starting out, purchase more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no gap between the artistic hand and the hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Plans And Tools

Woodworking in your home will give you time to explore different projects and find out so many things. That’s why it’s important to invest less money when starting out so that you can afford to make mistakes and at any time learning about various jobs.
It’s extremely important you know about the different kinds of wood available for creating jobs. Anticipate carpenters utilize different kinds of wood quality for decorating bits, learning what kind of wood that they use can help you prepare the wood you’ll need for specific jobs you may want to pursue.
Once you understand the basics of wood choice and the usage of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in building good projects to satisfy your needs.

Woodworking Plans And Tools practice makes perfect so be sure you practice your work daily if at all possible. Try out a lot of designs utilizing various tools so that you can find the hang of working with the tools. When starting out you can earn a range of errors but with time you will find out how to correctly use them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Plans And Tools

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum number of tools and equipment. A small home workshop may generate a wide variety of simple projects that will help you develop your creative and construction skills while rewarding you with artistic and practical wood products that you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us talk about where you’ll perform your woodworking, based on the size of your home, you might have the ability to create a dedicated space into your woodworking tasks. This might be a reserved spot in your garage or on your basement. Sometimes, a detached shed or outbuilding may be perfect to set up your very first shop. A heated shop detached from your home provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw dust up into the upper levels of the house. Another advantage of detached workshops would be, of course, the noise level. It’s possible to work without disturbing the remainder of the household. A good compromise might be the garage of your property.

This might help minimize the problems of dust and sound, however based on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Woodworking Plans And Tools

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they add more space to function in. Woodworking Plans And Tools if you’re able to have a dedicated spot for a marathon all the better. Floor tools and bench top gear can remain in position from project to project. If this setup isn’t impossible, at least try to make a chair area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and gear. In the start, establish a bench area where you can store and use most of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Insert a sturdy shelf below the seat to house your hand power tools and a pegboard above the seat to hang additional equipment. Put in a woodworking at one end of your seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Plans And Tools

The reach of your startup equipment will be largely based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, buy your quality tools in the regional construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other local ads. You will find an abundance of quality lightly used programs out there that belong to individuals who stumbled on that 1 molding job around the home or obtained tools as gifts which they will never utilize. You can usually buy tools for all these sellers for under half the initial price and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will take extra time and perhaps travel expenses. Weigh the advantages of traveling around town to save a few extra dollars on a inexpensive piece of gear. The excess expense of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal quantity of hand equipment yet generated sophisticated and complex pieces. Concentrate on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together if you find them uneasy.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often known as a skill saw after the favorite brand name, this can prove to be the most versatile tool in a startup workshop. In fact, at the hands of an expert, a power hand saw can be used to construct an whole property. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second project. After choosing the proper saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid blade. All these have a balanced enamel count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot only cut curves. It’s perfect for cutting holes in timber also like handle slots. Eventually, you’re going to want to get a band saw. Bandsaws are even more versatile but a quality floor unit could be costly. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss over the standard 3/8 inch model. Down the street, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have discovered that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their battery life will be bad and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not want in your workshop. Purchase an assortment of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning each drill bit to its potential slot in the holder after every use. Last, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Although the most ordinary, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more suited for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you will probably upgrade to a floor version disc and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface space. As you embark on your first few projects you might find that your palm sander using just a bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets with an excess source of 100 grit paper. You’ll find that this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in theory, these tools enable you to taper borders, flatten high spots and fix any imperfections in wood bits. {Start with a typical number 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, good clamps are costly and it usually requires the novice woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure is still the same. Receive a pair of the maximum clamps which you can afford. You may contact them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of the seat is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the consumer to quickly open and close the limbs with no dull handle rotation. The wood beamed surfaces in your vice will periodically require replacement. I would rather utilize soft pine in my vices which will not crush or damage many of the various woods that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among your most frequently used tools. Buy a good excellent name brand tape measure with a wide tape typically from the 25-foot selection. Even though in your shop you might not be using the tape at these spans, the larger tape steps offer more rigid tapes that will not flop around and slip off the ending of boards. Assessing when you are on your own will be a lot easier, and naturally, quality tape measures can last for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can assist you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I discover the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and repairing small mistakes on the way.

Adhesives: Not many glues are made equal. Avoid inexpensive house brands sold as carpenter’s glue. The cost of adhesive through all of your projects is a minor cost consideration. For that reason, it makes sense to decide on the very best. I have also found over the years that I receive the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Woodworking Plans And Tools

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of hurried lives, smartphones, and time-starved careers. With a minimum investment in the most rudimentary tools and equipment, everyone can learn the profitable abilities of his time-tested avocation and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Drawknife

A drawknife (drawing knife, draw shave, shaving knife)[1] is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer (along the cutting edge) than it is deep (from cutting edge to back edge). It is pulled or "drawn" (hence the name) toward the user.

The drawknife in the illustration has a blade 23 centimetres (9.1 in) although much shorter drawknives are also made. The blade is sharpened to a chisel bevel. Traditionally, it is a rounded, smooth bevel. The handles can be below the level of the blade (as in the illustration) or at the same level.[2]

A drawknife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves.

Video: Woodworking Projects