Woodworking Plans Online | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those attributes alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they’re after because all the ideas and jobs Ted’s source are easy to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up creating a truly’complete’ woodworking source.

Many may still appear unsure whether they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more challenging to make the right choice. There are actually many things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. Those that are just getting started will discover the thoughts and jobs in Ted’s bundle quite easy. No doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s simple step-by-step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to find any project of their choice within this package quite readily, though there so many options.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it’ll be endorsed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large size. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overrun considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast it contains just about every woodworking project a woodworker might be considering constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking packages that are available across the internet. Ted has done his very best to guide them in every possible way he can, through simple to comprehend textual instructions, clear pictures and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and much more woodworking power tools here, but the concept is to purchase the crucial hand and power tools that novices will need. You can always add to your arsenal as you get experience!

Woodworking Plans Online Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. However, if you are unsure about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the authors in woodworking publications do a story about the best way to improve your woodworking craft. Whether it is showing you how to apply a finish to a completed project, or how to create a mortise and tenon joint, something new can be heard every month. Next, is purchasing instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Woodworking Plans Online

If you are a beginner and very interested in doing a DIY job for house afterward, woodworking can be interesting. If you don’t have the right information, instruction, and ability, you might land up spending more time and money than you originally meant to spend. As a novice woodworker, you want to have time and the correct tools. Having said, there are a couple of essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you must first need to be very interested in woodworking. Creating something new with your hands is a particular feeling. Do not start a project if you’re not interested, as this may land you at a bad place.

2. Consider the primary reason behind creating this woodworking project. Choose the uses of this thing you are making.

3. Consider your abilities and analyze the time that you have, until you start with a job.

4. Start jobs that you’re able to complete. If you’re in the middle of a work, then it’s better to not start any project in any way.

Starting Your First Woodworking Shop Woodworking Plans Online

If you keep those vital things in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking jobs that you want to start with. As a newcomer, always pick a project which has a very basic build up or a very simple construction. A few simple to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of the techniques, you could always proceed to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their resources. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Plans Online

Tools would be the means whereby you can win the battle of woodworking. Many people think that power tools are needs. But for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when mended with vises, provide ample space to operate. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things much simple for you. When you buy a hammer, constantly check the balance between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws out there in the market. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them will help you ahead of time woodworking. You can also purchase keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this is not a tool for beginners, but using it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed cost on woodworking projects. Dependent on the type of project you would like to finish, pricing can be set. The easy the job, the less cost it involves. But at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it’s much better to resolve a budget first on the tools, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you do not have to purchase any more material other than the timber ply.

Time and Directions

Instructions are among the primary things that every newcomer should follow. Instructions guide is quite easy to comprehend the procedure, what to do and the way to do it. It keyword is a systematic guide for completing the job. Time also has a significant role in the building of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a novice to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or tricks that will make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to achieve success is proper planning. With appropriate planning and a strategy, it is likely to achieve success quickly. If you know the objective of woodworking, then the thing you need to build, the resources you require to possess and the typical time it’s possible to devote every day; then you’re ready to go.

Conclusion, Woodworking Plans Online

These tips and instruction will make the woodworking projects and plans for beginners quickly to finish. Always ensure you have all of the vital tools, materials, space prepared. Read the instructions for building a product handy. Proper strategy and preparation can allow you to earn a fantastic woodworking project for your property.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Plans Online

People when trying to find a way to pass time or desire an alternate method to generate money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can consider. When starting out you need to be very careful when choosing which job to begin with since there are projects that may be too difficult for a newbie. But don’t be concerned about that because we will provide you guidelines on the right way to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, therefore before you choose your job you have to know whether you’ve got the available resources to work on such a job. Try not to spend a lot of money on buying gear when starting out, purchase more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no difference between the hand as well as the hands.

How to Become a Master Woodworker From Your Own Home Woodworking Plans Online

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will provide you time to research different jobs and learn a lot of things. That is why it’s very important to invest less money when starting out so that you can afford to make mistakes and at some time learning about various projects.
It’s extremely important you know about different kinds of wood available for creating projects. Anticipate carpenters utilize several kinds of wood quality for decorating bits, learning which type of wood that they use can help you prepare the wood you’ll need for certain projects you might want to pursue.
Once you understand the basics of wood choice and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to satisfy your wants.

Woodworking Plans Online practice makes perfect so be sure that you practice your work every day if possible. Try out a lot of designs utilizing various tools so you can get the hang of using the tools. When starting out you can earn a number of mistakes but with time you will learn how to properly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Woodworking Plans Online

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimum amount of tools and equipment. A little home workshop can produce a broad variety of simple projects which will allow you to develop your creative and construction skills while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us discuss where you will perform your woodworking, based on the size of your home, you might have the ability to produce a dedicated space into your woodworking tasks. This may be a reserved place in your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your first store. A heated shop detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops is, clearly, the noise level. It’s possible to work without bothering the rest of the family. A good compromise could be the garage of your property.

This can help minimize the difficulties of dust and noise, however based on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Woodworking Plans Online

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they include more space to work in. Woodworking Plans Online if you can have a dedicated spot for a marathon all the greater. Floor gear and bench top equipment can stay in position from project to project. If this setup is not impossible, at least attempt to create a bench area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. In the start, set up a bench area where you can store and use most of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Insert a sturdy shelf below the bench to house your hand power tools and a pegboard above the seat to hang other gear. Install a woodworking at one end of your seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Plans Online

The reach of your startup equipment will be largely based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools at your local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. There are an abundance of quality lightly used programs out there that belong to people who embarked on that 1 molding job around the home or obtained tools as presents which they won’t ever use. You can usually purchase tools for these sellers for under half the initial price and save even more money should you create a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take additional time and possibly travel expenses. Weigh out the benefits of traveling around town to save a couple added bucks on a cheap piece of equipment. The extra cost of travel and time in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal amount of hand equipment yet produced sophisticated and complex pieces. Focus on developing your abilities with your startup set of tools and prevent lamenting about the equipment you wished you’d.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and influence security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next bit of critical safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire quicker when exposed to high noise levels. Select powerful hearing protection which you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. I prefer a very simple ball cap with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw following the popular name, this may prove to be the most versatile tool in a startup workshop. In reality, in the hands of a professional, a power hand saw could be used to construct an entire property. Eventually, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, tear cuts and even intricate angle cuts. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your second project. After choosing the right saw install a quality blade. Most skill saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument can’t just cut corners. It’s ideal for cutting holes in wood too like handle slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit can be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not want in your workshop. Purchase an range of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Make a habit of returning every drill piece to its prospective slot in the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents happen. Even though the most frequent, hammer injuries are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The head usually comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce scope for overall work and a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disk and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on your first few projects you’ll discover your palm sander with just a little bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll get this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber bits. {Begin with a standard amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it usually takes the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Start with a pair of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Receive a pair of the maximum clamps which you can afford. You may contact them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed in the end of your bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enable the consumer to quickly open and close the limbs with no dull handle turning. The timber clamping surfaces in your vice will periodically require replacement. I prefer to utilize soft walnut in my vices which will not crush or damage lots of the various woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most frequently used tools. Buy a good excellent name brand tape measure with a wide tape usually from the 25-foot selection. Although in your shop you might not use the tape in these lengths, the larger tape steps provide more rigid tapes that will not flop around and slide off the ending of planks. Measuring when you’re by yourself will be a lot easier, and naturally, quality tape steps can last for many years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can help you in marking the ideal angles as well as compound angles. Additionally, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. The cost of glue through all your jobs is a minor cost consideration. For that reason, it makes sense to go with the best. I have also found over the years that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade glue. All these resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Woodworking Plans Online

The peaceful gratification of woodworking is a wonderful adventure in this day and age of hurried lives, smart phones, and time-starved livelihood. With a minimum investment at the most rudimentary tools and equipment, everyone can learn the profitable abilities of his time-tested hobby and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodcraft Supply

Woodcraft Supply, LLC operates woodworking specialty retail stores across the United States (including 34 of 50 U.S. states). It also publishes a woodworking industry magazine, distributes consumer catalogs (in all 50 U.S. states and 117 countries)[1] and operates an ecommerce website.[2] The stores, catalogs and website combined sell about 20,000 products covering wood working tools, raw materials, instructional media and project kits.[3][4][5][6]

In the 1960s, Roger Wells bought Woodcraft and moved the headquarters to Woburn, Massachusetts. Woodcraft moved into a warehouse and corporate office after the success of its initial printed ads which led to creation of its catalog. Sam Ross, founder of SBR Inc., bought Woodcraft in 1972 and used his retail experience to build new stores and grow the company. In 1992, Sam Ross moved Woodcraft headquarters to Parkersburg, West Virginia.[8][9]

Woodcraft opened a new Boston area corporate location in Walpole, Massachusetts in 2013. That same year, Woodcraft and the Swiss toolmaker Pfeil celebrated 50 years as international business partners.[12]

Video: Woodworking Tools