Woodworking Plans Storage | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they’re following because most of the thoughts and projects Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up creating a really’complete’ woodworking resource.

Many might still appear unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are actually lots of things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. People that are just getting started will find the ideas and projects in Ted’s package quite simple. No doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step-by-step directions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to find any project of their choice in this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it’ll be backed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains just about every woodworking project a woodworker may be interested in building.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that are available across the internet. Ted has done his very best to direct them in every possible way he could, through easy to comprehend textual directions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. Therefore, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools , but the idea is to buy the essential hand and power tools that beginners will need. You can always add to your toolbox as you gain experience!

Woodworking Plans Storage Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines out there. Every month the writers in woodworking magazines do a story on the best way best to increase your woodworking craft. When it’s showing you how you can apply a finish to a completed job, or how to make a mortise and tenon joint, something new could be learned every month. Next, is buying instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop Woodworking Plans Storage

If you’re just beginning and very interested in doing a DIY project for home then, woodworking can be fun. If you do not have the proper information, instruction, and ability, you may wind up spending more time and money than you originally intended to spend. As a novice woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Don’t start a project if you’re not interested, as this may land you in a terrible place.

2. Consider the main reason for creating this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your abilities and analyze the time you have, before you begin with a job.

4. Start jobs that you can finish. If you are in the midst of some work, then it is wise not to start any project in any way.

The Benefits of Woodworking Woodworking Plans Storage

If you maintain those essential things in mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much as it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking jobs you wish to start with. As a beginner, always select a project that has a very basic construct up or a simple construction. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you can always move to the next level of woodworking jobs, like cabinets, sheds, and others. Beginning jobs should always keyword be less complicated and less bothersome so that you have a better knowledge of working with woods and their tools. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Woodworking Plans Storage

Tools would be the means whereby you can win the struggle of woodworking. A lot of men and women think that power tools are needs. But for beginners, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things much easy for you. When you buy a hammer, always check the balance between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws available in the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them can help you ahead of time woodworking. You might also purchase keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for novices, but having it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed price on woodworking jobs. Dependent on the type of project you would like to finish, pricing can be set. The easy the project, the less cost it involves. But at the very beginning buying the tools will probably be a little hefty. Therefore, it is much better to fix a budget on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t need to purchase any more material aside from the wood ply.

Time and Instructions

Instructions are among the principal things that each and every newcomer should follow. Instructions manual is very simple to understand the process, what to do and how to get it done. It keyword is a systematic manual for completing the project. Time also plays an important role in the construction of woodworking jobs. Woodworking projects require time and so it’s necessary for a beginner to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword which will help you to reach success is proper preparation. With appropriate planning and a strategy, it’s possible to achieve success quickly. If you understand the objective of woodworking, then the thing you want to construct, the tools you require to possess and the typical time you can give daily; then you are ready to go.

Conclusion, Woodworking Plans Storage

These tips and education will create the woodworking projects and strategies for novices quickly to complete. Always ensure you have all the essential tools, materials, area ready. Read the instructions for building an item handy. Proper strategy and planning will help you to earn a fantastic woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Plans Storage

Folks if you’re trying to find a way to pass time or want an alternative way to generate money they generally turn to a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you need to be very careful when choosing which job to begin with since there are projects which can be too difficult for a newbie. But don’t be concerned about that because we will give you tips on the ideal way to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, so before you choose your job you have to know whether you’ve got the available resources to work on such a job. Try not to invest a lot of money on buying equipment when starting out, purchase more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the hand and the normal hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Plans Storage

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will give you time to research unique projects and find out a lot of things. That is why it’s very important to invest less money when starting out so you can afford to make errors and at some time learning about various projects.
It is extremely important that you know about the different kinds of wood available for making jobs. Expect carpenters use several types of wood quality for decorating pieces, learning which kind of wood that they use will allow you to prepare the wood you will need for certain jobs you may choose to pursue.
Once you know the basics of wood choice and the use of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in building good jobs to fulfill your needs.

Woodworking Plans Storage practice makes perfect so be sure that you practice your work every day if at all possible. Try out lots of designs utilizing various tools so you can find the hang of using the tools. When starting out you can make a range of errors but with time you will find out how to correctly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Woodworking Plans Storage

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimal number of tools and equipment. A little home workshop may generate a wide array of simple projects which will help you develop your creative and construction abilities while rewarding you with artistic and practical wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us discuss where you’ll perform your woodworking, based on the dimensions of your house, you might have the ability to create a dedicated space into your woodworking tasks. This may be a reserved spot in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your first shop. A heated shop detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably produce dust which travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air returns located in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops would be, clearly, the sound level. You can work without disturbing the rest of the family. A fantastic compromise could be the garage of your home.

This can help decrease the difficulties of dust and noise, however depending on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Woodworking Plans Storage

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to function in. Woodworking Plans Storage if you’re able to have a dedicated place for a workshop all the greater. Floor tools and bench top equipment can stay in position from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and equipment. At the beginning, set up a seat area where you are able to shop and use most of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to house your hands power tools along with a pegboard over the seat to hang other gear. Put in a woodworking at one end of your seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Plans Storage

The reach of your startup equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools at the local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional ads. There are an abundance of quality gently used programs out there which belong to individuals who stumbled on that 1 molding job around the house or received tools as presents that they won’t ever utilize. You can usually buy tools for these sellers for under half the original price and save even more money if you make a bundle deal for all their unused equipment. Obviously, getting tools from private people will require extra time and possibly travel expenses. Weigh out the advantages of traveling across town to save a couple added bucks on a cheap piece of gear. The excess expense of travel and time in these situations is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum amount of hand gear yet generated sophisticated and complex pieces. Focus on developing your skills with your startup set of tools and avoid lamenting about the gear you wished you’d.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and influence security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire faster when subjected to elevated noise levels. Select effective hearing protection that you find comfortable and effective. These may include earplugs or full ear keyword muff protectors. I find that a quality set of ear muff protectors is ideal for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite name, this can prove to be the most flexible instrument in a startup workshop. In fact, at the hands of a professional, a power hand saw can be used to construct an whole house. At some point, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your next project. After selecting the proper saw install a quality blade. Most skill saws include a starter blade of lower quality even if they are a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument can’t only cut corners. It’s perfect for cutting holes in timber too like manage slots. Eventually, you’ll want to get a ring saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the standard 3/8 inch model. Through tough lessons learned, I have discovered that purchasing quality, in this case, is more critical than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not need in your workshop. Purchase an assortment of quality carbide tipped drill bits which are kept in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot at the holder after every use. Last, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents happen. Even though the most frequent, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The head typically comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for general work and also a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander with a little bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll get this caliber of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper borders, flatten high spots and fix any imperfections in wood bits. {Start with a standard amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a few years to accumulate a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure remains the same. Receive a pair of the longest clamps that you can afford. You can contact them for smaller adhesive jobs and expand them to their full length for bigger projects.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enable the consumer to quickly open and close the limbs with no dull handle turning. The wood clamping surfaces in your vice will periodically require replacement. I prefer to use soft walnut in my vices that will not crush or damage many of the different forests that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of your most frequently used tools. Purchase a good quality name brand tape measure with a broad tape typically from the 25-foot selection. Although in your shop you might not be using the tape in these lengths, the bigger tape measures offer more rigid tapes that will not flop around and slide off the ending of planks. Assessing when you are by yourself will be a great deal simpler, and naturally, quality tape measures can last for many decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will help you in marking the ideal angles as well as compound angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover the Robertson format works great for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. The expense of adhesive through all of your projects is a minor cost consideration. Therefore, it is sensible to go with the very best. I also have discovered over time that I receive the best results with both indoor and outdoor projects when I use quality outside grade adhesive. All these resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Woodworking Plans Storage

The peaceful gratification of woodworking is an excellent adventure in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimum investment in the most rudimentary tools and equipment, anyone can learn the profitable abilities of his time-tested avocation and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Workbench (woodworking)

A workbench is a table used by woodworkers to hold workpieces while they are worked by other tools. There are many styles of woodworking benches, each reflecting the type of work to be done or the craftsman's way of working. Most benches have two features in common: they are heavy and rigid enough to keep still while the wood is being worked, and there is some method for holding the work in place at a comfortable position and height so that the worker is free to use both hands on the tools. The main thing that distinguishes benches is the way in which the work is held in place. Most benches have more than one way to do this, depending on the operation being performed.

Probably the oldest and most basic method of holding the work is a planing stop or dog ear, which is simply a peg or small piece of wood or metal that stands just above the surface at the end of the bench top. The work is placed on the bench with the end pushed against the stop. The force of the planing keeps the board in place, so long as the force is always toward the stop. Planing against a stop gives the woodworker good feedback - they can tell a lot about what is going on just by the pressure, force and balance required. A stop can take the form of a batten attached to the end of the bench, or it can be adjustable, able to be moved up and down according to the size of the work - or pushed down below the surface when not needed. A simple bench dog can serve as a planing stop.

Another ancient method of holding the work is the hold fast or holdfast. A holdfast looks like a shepherd's crook. The shank goes into a hole in the bench top and the tip of the hook is pressed against the work from above. The holdfast is set by rapping the top with a mallet, and released by hitting the back side. A good holdfast works remarkably well, and is inexpensive and easy to install.

Video: Woodworking Tools