Woodworking Plans Torrent | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they are following because most of the ideas and jobs Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so that he could gather enough material for an extensive bundle, and he ended up making a truly’complete’ woodworking source.

Many may still appear unsure whether they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more difficult to make the ideal option. There are actually lots of things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. Those that are just getting started will discover the ideas and projects in Ted’s package quite simple. Without doubt, intricate carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to have the ability to locate any project of their choice within this bundle quite readily, even though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it will be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Yet, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking packages that are available across the internet. Ted has done his very best to direct them in every possible way he can, through simple to comprehend textual instructions, clear pictures and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find inside. Therefore, it’s definitely worth buying!

The Benefits of Woodworking Woodworking Plans Torrent

Woodworking is one hobby that can also be a rewarding career if you like to work together with your hands and construct exquisite pieces of furniture from timber. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to build all types of furniture, (beds, table, and chairs), effortlessly. You can then sell your completed woodworking jobs and make a handsome profit. Woodworking Plans Torrent.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman level is you will be able to create some really wonderful furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living room. It will be a topic of conversation when you have friends come over to see. They will ask: How did you make it? How long did it take to complete the project? What kind of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you speak about your work, a feeling of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Woodworking Plans Torrent

If you’re thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Woodworking Plans Torrent.

Begin with a concept in your mind of what you want to build then get a excellent woodworking project plan that’s geared toward beginners. There are several little woodworking projects for beginners available for sale from online woodworking merchants. A few woodworking program suggestions to get you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to mention a couple. Of course, you can begin with as expansive a woodworking plan as you pick. On the other hand, the odds are if you start out using a small woodworking job initially, you’ll get a better chance of keyword completing the project.

Your woodworking project plan must incorporate some lists! Length of: woodworking equipment, the amount and variety of wood needed, and the essential hand tools and power tools to finish the undertaking. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you are a beginner and just beginning. Tools aren’t affordable. The newcomer needs good woodworking gear, but you can easily break the bank buying a lot of tools you might not utilize all that frequently. If you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry area to work and may require a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools , but the idea is to buy the essential hand and power tools that beginners will need. You can always increase your arsenal as you get experience!

Woodworking Plans Torrent Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. But if you’re not certain about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the authors in woodworking magazines do a story on how to improve your woodworking craft. Whether it’s showing you how you can apply an end to a completed project, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodworking Plans Torrent

If you are just beginning and very enthusiastic about doing a DIY job for house afterward, woodworking could be fun. If you do not have the proper information, instruction, and ability, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having said, there are a couple of essential factors that you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you must first need to be somewhat interested in woodworking. Making something new with your hands is a special sense. Don’t start a job if you are not interested, as this may land you in a terrible location.

2. Think of the main reason for creating this woodworking project. Choose the uses of this item you are making.

3. Consider your abilities and examine the time you have, until you start with a job.

4. Start jobs which you’re able to complete. If you are in the middle of a work, then it’s wise not to begin any project in any way.

The Benefits of Woodworking Woodworking Plans Torrent

If you keep those vital things in your mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking jobs that you wish to begin with. As a newcomer, always pick a project that has quite a basic construct up or a very simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you find the techniques, you can always move into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less bothersome so that you have a better comprehension of working with forests and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Plans Torrent

Tools are the ways whereby you can win the struggle of woodworking. Many men and women think that power tools are requires. However, for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is the hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer can make matters considerably easy for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws out there on the marketplace. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you in advance woodworking. You might even purchase keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. However, this is not a tool for beginners, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed cost on woodworking jobs. Based on the sort of project you want to complete, pricing can be set. The simple the project, the less price it involves. However, at the beginning purchasing the tools will be somewhat hefty. Because of this, it’s much better to fix a budget on the tools, then keyword on the undertaking. Buying the basic tools will ensure that you do not need to purchase any more material aside from the timber ply.

Time and Instructions

Instructions are among the primary things that every beginner should follow. It is like the woodworking Bible. Instructions manual is very easy to comprehend the procedure, what to do and how to do it. Time also has a significant part in the construction of woodworking projects. Woodworking projects demand time and so it is crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword which can help you to reach success is proper planning. With appropriate planning and a plan, it’s likely to achieve success immediately. If you know the purpose of woodworking, then the item you want to construct, the resources you require to possess and the typical time you can give daily; then you are all set to go.

Conclusion, Woodworking Plans Torrent

All these strategies and education is likely to create the woodworking projects and strategies for novices quickly to complete. Always make sure that you have all the essential tools, materials, area ready. Keep the instructions for constructing a product handy. Appropriate strategy and preparation will allow you to earn a fantastic woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Plans Torrent

Folks if you’re trying to find a way to pass time or want an alternate way to generate money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to do as a hobby or home based company. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can consider. When starting out you need to be quite cautious when choosing which job to start out with because you will find jobs that may be too difficult for a beginner. But don’t be concerned about that because we will give you guidelines on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you pick your project you need to know whether you have the available tools to work on that project. Try not to spend a good deal of money on buying equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Plans Torrent

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will provide you time to explore different jobs and find out so many things. That is why it’s very important to spend less money when starting out so that you can manage to make errors and at some time learning about different projects.
It’s very important you know about different kinds of wood available for making projects. Expect carpenters use several kinds of wood quality for decorating bits, learning what type of wood that they use can allow you to prepare the wood you will need for specific projects you may choose to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in creating good jobs to fulfill your wants.

Woodworking Plans Torrent practice makes perfect so be sure that you practice your work every day if at all possible. Try out lots of designs utilizing various tools so you may get the hang of working with the tools. When starting out you may earn a range of errors but with time you will learn how to properly use them and create quality projects.

|

Starting Your First Woodworking Shop Woodworking Plans Torrent

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimal number of gear and equipment. A little home workshop can generate a broad array of simple projects that will help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s talk about where you will perform your woodworking, based on the size of your home, you might have the ability to produce a dedicated space into your woodworking tasks. This might be a reserved spot in your garage or in your basement. In some cases, a detached shed or outbuilding may be perfect to prepare your first store. A heated shop detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably create dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air returns found in the cellar draw up dust into the top levels of the house. Another benefit of detached workshops would be, clearly, the noise level. It’s possible to work without disturbing the rest of the family. A fantastic compromise could be the garage of your home.

This might help decrease the problems of dust and sound, however depending on where you reside, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Plans Torrent

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to work in. Woodworking Plans Torrent if you’re able to have a dedicated place for a marathon all the greater. Floor tools and bench top gear can stay in position from project to project. If this setup isn’t hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and gear. In the start, set up a seat area where you are able to shop and use the majority of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf beneath the seat to home your hands power tools and a pegboard over the seat to hang other gear. Put in a woodworking at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Plans Torrent

The scope of your start-up equipment will be largely based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, then purchase your quality tools in the regional construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional ads. There are plenty of quality lightly used tools out there that belong to people who stumbled on that one molding job around the house or obtained tools as presents that they won’t ever use. You can usually purchase tools for all these sellers for less than half of the initial price and save even more money should you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will require extra time and possibly travel expenditures. Weigh the advantages of traveling around town to save a couple extra dollars on a cheap piece of equipment. The excess cost of time and travel in these scenarios is generally justified when purchasing large ticket items like table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal amount of hand equipment yet generated sophisticated and complex bits. Focus on developing your abilities with your startup set of resources and prevent lamenting about the equipment you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and affect security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together in the event that you find them uneasy.

The next bit of crucial safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. With this setup I am protecting my eyes and my ears. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw following the favorite brand name, this can prove to be the most versatile instrument in a startup workshop. In reality, at the hands of an expert, a power hand saw could be employed to construct an entire house. As mentioned before get a quality brand saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you start your next project. After selecting the right saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they are a good saw. Keep this blade as a backup and install a quality blade with carbide teeth. Start with a hybrid . These possess a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot just cut corners. It’s perfect for cutting holes in timber also like handle slots. Eventually, you’ll want to obtain a ring saw. Bandsaws are even more versatile but a excellent floor unit could be costly. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the conventional 3/8 inch version. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not want on your workshop. Purchase an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning every drill bit to its potential slot in the holder after each use. Last, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce scope for overall work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you’ll probably update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might find that your palm sander with just a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in timber pieces. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it usually requires the novice woodworker a few years to collect a detailed set of timber clamps. Begin with a pair of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the longest clamps which you can afford. You can get in touch with them for smaller glue jobs and enlarge them to their full length for larger jobs.

Shop Vice: A store vice installed at the end of your seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enable the user to quickly open and close the limbs without tedious handle rotation. The wood clamping surfaces on your vice will periodically require replacement. I would rather use soft walnut in my vices which will not crush or damage many of the different woods that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most frequently used tools. Purchase a good quality name brand tape measure with a wide tape typically in the 25-foot selection. Even though in your shop you might not be using the tape at these spans, the larger tape measures offer more rigid tapes which will not flop around and slip off the ending of boards. Measuring when you’re on your own will be a lot easier, and of course, quality tape steps can endure for many decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the ideal angles as well as chemical angles. Get the number two and three Robertson set. I discover the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and repairing little mistakes along the way.

Adhesives: Not many glues are made equal. Avoid inexpensive home brands sold as carpenter’s glue. The cost of glue through all your jobs is a minor cost consideration. For that reason, it makes sense to decide on the very best. I have also found over time that I get the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Woodworking Plans Torrent

The peaceful gratification of woodworking is a wonderful experience in this era of rushed lives, smartphones, and time-starved careers. With a minimum investment in the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Destruction of country houses in 20th-century Britain

The destruction of country houses in 20th-century Britain was a phenomenon brought about by a change in social conditions during which a large number of country houses of varying architectural merit were demolished by their owners. Collectively termed by several authors "the lost houses", the final chapter in the history of these often now-forgotten houses has been described as a cultural tragedy.[2][3]

The British nobility had been demolishing their country houses since the 15th century, when comfort replaced fortification as an essential need. For many, demolishing and rebuilding their country homes became a lifelong hobby, in particular during the 18th century when it became fashionable to take the Grand Tour and return home with art treasures, supposedly brought from classical civilizations. During the 19th century, many houses were enlarged to accommodate the increasing armies of servants needed to create the famed country house lifestyle. Less than a century later, this often meant they were of an unmanageable size.

In the early 20th century, the demolition accelerated while rebuilding largely ceased. The demolitions were not confined to England, but spread throughout Britain. By the end of the century, even some of the "new" country houses by the architect Edwin Lutyens had been demolished. There were a number of reasons: social, political and, most importantly, financial. In rural areas of Britain, the destruction of the country houses and their estates was tantamount to a social revolution. Well into the 20th century, it was common for the local squire to provide large-scale employment, housing, and patronage to the village school, parish church, and a cottage hospital. The "big house" was the bedrock of rural society.[4]

Video: Woodworking Tools