Woodworking Plans Trash | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities that make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they’re after because all the ideas and jobs Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so he could collect enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more challenging to make the right option. There are in fact lots of things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. People who are just getting started will find the thoughts and jobs in Ted’s package quite simple. Without doubt, complicated carpentry is involved; however, they will discover that it’s really easy to follow Ted’s easy step by step directions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will be able to find any job of their choice in this bundle quite readily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who buy it will be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large dimensions. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so thorough and vast that it contains pretty much every woodworking project a woodworker might be considering constructing.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that are available across the internet. Ted has done his best to guide them in every possible way he can, through easy to understand textual directions, clear pictures and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it’s certainly worth buying!

The Benefits of Woodworking Woodworking Plans Trash

Woodworking is one hobby that could also be a rewarding career if you love to work with your hands and construct exquisite pieces of furniture from wood. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to build all types of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking projects and make a handsome profit. Woodworking Plans Trash.

It requires time to become proficient at the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you will have the ability to create some really wonderful furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It’ll be a topic of conversation whenever you have friends come over to see. They will ask: How can you create it? Where did you get the woodworking programs? How long can it take to finish the job? What type of tools did you use? Just how on earth did you make such a gorgeous item of furniture? As you discuss your job, a sense of pride will encounter you and also do not be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Woodworking Plans Trash

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Woodworking Plans Trash.

Start with an idea in mind of what you want to construct and then get a excellent woodworking project plan that’s geared toward novices. There are numerous small woodworking projects for beginners available for purchase from online woodworking merchants. Of course, you can start out with as grand a woodworking plan as you pick. On the other hand, the odds are if you start out using a little woodworking project initially, you’ll have a better prospect of keyword finishing the job.

Your woodworking project plan must include some lists! Lists of: woodworking equipment, the quantity and type of wood required, and the essential hand tools and power tools to complete the project. Note: A word of caution about buying woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just beginning. Tools aren’t cheap. The beginner needs good woodworking gear, but it is simple to break the bank buying a lot of tools you may not utilize all that often. If you do buy gear, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood glue! Obviously, you will need a dry area to work and might require a pair of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools which novices will need. You can always add to your toolbox as you get experience!

Woodworking Plans Trash Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. But if you are not certain about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Every month the authors in woodworking publications do a story about how to improve your woodworking craft. When it’s showing you how to apply a finish to a finished project, or how to make a mortise and tenon joint, something new could be heard every month. Next, is buying instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Plans Trash

If you are a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking could be fun. If you do not have the right information, instruction, and ability, you might land up spending more time and money than you initially intended to spend. As a novice woodworker, you want to have time and the appropriate tools. Having mentioned, there are a couple of essential factors you need to keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you must first need to be somewhat interested in woodworking. Making something new with your hands is a special feeling. Don’t begin a project if you are not interested, as this may land you at a terrible location.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of the thing you are making.

3. Consider your abilities and examine the time you have, until you start with a job.

4. Start jobs which you can complete. If you are in the midst of a work, then it is better not to start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Plans Trash

If you maintain those vital points in your mind before beginning a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking jobs that you wish to start with. As a beginner, always select a job that has quite a basic build up or a very simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always proceed to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their tools. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Woodworking Plans Trash

Tools are the means whereby you can win the struggle of woodworking. Many people believe power tools are requires. However, for beginners, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to work. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things considerably simple for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws out there on the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them can help you in advance woodworking. You can even purchase keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but using it might make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking jobs. Dependent on the sort of project you would like to finish, pricing could be determined. The simple the job, the less cost it involves. However, at the beginning purchasing the tools will be somewhat hefty. Therefore, it is better to fix a budget on the resources, then keyword on the project. Buying the basic tools will make certain you don’t need to buy any more material other than the wood ply.

Time and Instructions

Directions are among the principal things that every newcomer should follow. It’s like the woodworking Bible. Instructions guide is quite easy to comprehend the procedure, what to do and how to do it. It keyword is a systematic guide for completing the job. Time also has a significant role in the construction of woodworking projects. Woodworking projects require time and so it’s crucial for a novice to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most indispensable thing keyword that will allow you to reach success is proper planning. With proper planning and a plan, it is possible to achieve success immediately. If you know the objective of woodworking, the thing you want to construct, the resources you need in order to own and the typical time you can give every day; then you are all set to go.

Conclusion, Woodworking Plans Trash

All these tips and instruction is likely to create the woodworking projects and strategies for novices fast to finish. Always make sure you have all the essential tools, materials, area ready. Read the instructions for building an item handy. Appropriate strategy and preparation can allow you to earn a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Plans Trash

Folks when looking for a way to pass time or want an alternate method to make money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you have to be very careful when choosing which project to start out with since there are jobs which may be too tough for a newbie. But don’t worry about that since we are going to provide you tips on the ideal way to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, so before you pick your project you need to be aware of whether you have the available tools to work on that job. Try not to invest a lot of money on purchasing equipment when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the hand and the hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Plans Trash

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking at home will provide you time to explore different jobs and learn a lot of things. That is why it’s very important to invest less money when starting out so that you can manage to make mistakes and at some time learning about various projects.
It is extremely important you know more about the different kinds of wood available for making jobs. Expect carpenters use several types of wood quality for decorating bits, learning what kind of wood that they use can help you prepare the wood you will need for certain projects you may want to pursue.
As soon as you know the basics of wood selection and the use of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do can help you in creating good jobs to satisfy your wants.

Woodworking Plans Trash practice makes perfect so be sure that you practice your work every day if possible. Try out lots of designs using a variety of tools so that you can find the hang of using the tools. When starting out you may earn a range of mistakes but with time you will learn how to properly utilize them and produce quality projects.

|

The Benefits of Woodworking Woodworking Plans Trash

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum number of gear and equipment. A little home workshop can produce a broad array of simple projects that can help you develop your creative and building skills while rewarding you with artistic and practical wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us discuss where you’ll do your woodworking, based on the size of your house, you might have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your first shop. A heated store detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement workshops will inevitably create dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns located in the basement draw up dust into the top levels of the house. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the remainder of the household. A fantastic compromise could be the garage of your property.

This might help decrease the problems of dust and noise, however depending on where you reside, a keyword garage layout may not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Plans Trash

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they include more space to work in. Woodworking Plans Trash if you can have a dedicated place for a marathon all the greater. Floor gear and bench top gear can remain in position from project to project. If this installation is not hopeless, at least try to make a chair area where equipment could be saved and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and gear. In the beginning, establish a seat area where you are able to shop and use the majority of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Add a sturdy shelf beneath the bench to home your hand power tools along with a pegboard over the seat to hang additional equipment. Put in a woodworking at one end of the seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Plans Trash

The reach of your start-up equipment will be largely based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools in your regional building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local ads. You will find an abundance of quality gently used tools out there that belong to individuals who embarked on that one molding project around the house or received tools as gifts that they won’t ever utilize. You can usually purchase tools for these sellers for under half the original price and save even more money if you make a bundle deal for all their unused equipment. Obviously, getting tools from private people will require additional time and perhaps travel expenses. Weigh out the benefits of traveling around town to save a few extra dollars on a cheap piece of gear. The excess expense of time and travel in these situations is usually justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum quantity of hand gear yet generated sophisticated and complex pieces. Concentrate on developing your abilities with your startup set of tools and avoid lamenting about the equipment you wished you’d.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw after the popular brand name, this may end up being the most flexible tool in a startup workshop. In fact, at the hands of an expert, a power hand saw can be employed to build an entire property. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you even start your second job. After selecting the right saw install a quality blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Begin with a hybrid . All these have a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot only cut curves. It’s perfect for cutting holes in wood too like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Through tough lessons learned, I have found that purchasing quality, in this case, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not need on your workshop. Buy an range of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning every drill piece to its potential slot at the holder after every use. Last, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries occur. Even though the most frequent, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce scope for overall work and also a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle pretty much any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you will probably update to a floor version disk and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on the first few projects you’ll discover your palm sander using just a bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and correct any imperfections in timber bits. {Begin with a typical amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually requires the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a set of the longest clamps that you can afford. You may contact them for smaller glue jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enabled the consumer to quickly open and close the limbs with no dull handle turning. The timber clamping surfaces on your vice will periodically require replacement. I would rather utilize soft walnut in my vices that won’t crush or damage many of the various forests that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be one of the most often used tools. Purchase a good quality name brand tape measure with a broad tape usually in the 25-foot range. Although in your store you may not use the tape at these spans, the bigger tape measures offer more rigid tapes that won’t flop around and slip off the end of planks. Assessing when you are on your own will be a great deal simpler, and of course, quality tape measures can endure for several years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood.

What is Woodworking? The Benefits of Woodworking Woodworking Plans Trash

Woodworking is known as the building or the creation of objects out of wood. It is possible to create a lot of unique objects from woodworking and these objects can be as large as gazebos or as small as wooden toys. However large or small your personal project maybe you will be quite likely to do that aim with woodworking. In addition, woodworking has many personal as well as emotional benefits! In this article, I will briefly identify some of the benefits for you.

Woodworking as a Career:

Individuals who build things from wood are usually known keyword because carpenters. Carpenters can work on a variety of woodworking projects and occupation types. For example, some carpenters possess their carpentry business and these individuals have the luxury to set their work hours. This benefit enables carpenters the chance to spend additional time with their families and have less job strain. Raising children is a really tough task no matter what way you approach the endeavor! To get a carpenter who owns their own business, this task may not be as hard since that individual will have more time to be part of his or her child’s lifetime. By playing a larger role in the life of your child you will be having a larger impact on the type of personality that kid develops into, which is a huge concern for any loving parent. Besides these advantages, carpentry can also have health benefits too.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Plans Trash

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a whole lot. This causes more physical activity, which results in better physical health. Maintaining your body physically fit is really important and keyword can assist in preventing the incidence of various ailments later on in life. By being physically fit you can reduce chances you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of having a range of different disorders.

Woodworking Plans Trash, Do It Yourself Woodworking Saves Money:

I always feel like that I paid way too much when I visit home improvement shops and purchase patio furniture, and I am sure that I am not the only person who has felt this way! A successful business owner once advised me to constantly raise the sales price of a product to double what you got it for. This way, you always have the option to reduce the merchandise to 50 percent away and still come out without acquiring any losses. This sounds like it may be the same strategy that home improvement stores use in selling their wooden furniture solutions. Regardless, there’s a way that you can get around paying the additional money and that has to do with building it yourself. Fortunately, there are some really excellent woodworking products that offer thousands of detailed woodworking keyword strategies for countless different project types. Thus, you really can build anything you want or see in almost any home improvement store. Doing something yourself does take a bit of time but time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Mount Pleasant Indian Industrial Boarding School

The Mount Pleasant Indian Industrial Boarding School and many like it across the country were established by an act of the United States Congress in 1891 that provided funding for the creation of an education system of off-reservation boarding schools and vocational training centers to educate Native American children.

The cornerstone of the first of eleven buildings that would make up the boarding school's campus was placed in front of a crowd of more than 2,000 people from all over the state on October 18, 1892. As part of the crowd's celebration, they congregated in the town of Mount Pleasant, Michigan and then paraded out to the school grounds. The Grand Master of the Free and Accepted Masons was on hand to lead in the "ancient ritual" of laying the cornerstone and the Grand Chaplain led the crowd in a Christian prayer to bless the school and all those that would reside there. What then was known at the Mount Pleasant Indian Industrial Boarding School started as a small school run by the United Methodist Church and had previously been known as the "farm school" as it was out in the middle of farmland outside of Mount Pleasant.

In 1892, the construction of the first school building for the purposes of educating Native American children began. October 18, 1892, dedication ceremonies for the main building took place and on January 3, 1893, the eight-classroom building opened to the first seventeen students. By June, 1893 enrollment had increased significantly and in the coming years it was necessary to build additional buildings to house all of the students and their daily activities. These included separate boys and girls dormitories, a hospital, a woodworking and blacksmith shop; a building for industrial training, a dining hall, a clubhouse for the employees of the school, several farm buildings, and the school built a new gymnasium in 1910. Adjacent to the school's location there was an "Indian Cemetery" that still exists today.

Video: Woodworking Projects