Woodworking Project Book | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are after because most of the ideas and projects Ted’s source are easy to comprehend and easy. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the right choice. There are in fact many things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. Those who are just getting started will discover the ideas and jobs in Ted’s bundle quite simple. No doubt, complicated carpentry is involved; however, they will discover that it’s really easy to follow Ted’s simple step by step directions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to locate any job of their choice in this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who buy it will be endorsed by a 60-day warranty, so if this woodworking package fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large size. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overrun considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that can be found throughout the internet. Ted has done his very best to guide them in every possible way he can, through easy to comprehend textual instructions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find within. Therefore, it is definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Woodworking Project Book

Woodworking is one hobby that can also be a rewarding career if you love to work with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to build all types of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking jobs and make a handsome profit. Woodworking Project Book.

It takes time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you will be able to create some really nice furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living room. It will be a topic of conversation whenever you have friends come over to see. They’ll ask: How can you create it? Where did you get the woodworking plans? Just how long can it take to complete the job? What kind of wood did you use? What type of tools did you use? How on earth did you make such a gorgeous piece of furniture? As you speak about your job, a feeling of pride will encounter you and do not be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Woodworking Project Book

If you are thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to Begin in Woodworking? Woodworking Project Book.

Start with a concept in mind of what you would like to build and then get a really good woodworking project plan that’s geared toward beginners. There are several small woodworking projects for novices available for sale from online woodworking retailers. A couple of woodworking plan suggestions for you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to name a couple. Of course, you can begin with as grand a woodworking plan as you choose. On the other hand, the chances are if you start out using a little woodworking job initially, you’ll get a better prospect of keyword finishing the project.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the quantity and variety of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you want to complete your immediate or upcoming project. This is important especially if you’re a beginner and just starting out. Tools are not cheap. The newcomer needs good woodworking gear, but you can easily break the bank purchasing a great deal of tools you might not use all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t overlook that the wood glue and a brush to spread the wood adhesive! Of course, you’ll need a dry place to work and might need a set of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools that novices will need. You can always increase your toolbox as you get experience!

Woodworking Project Book Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. But if you’re not certain about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Every month the authors in woodworking publications do a story on how best to increase your woodworking craft. Whether it’s showing you the way you can apply an end to a completed job, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodworking Project Book

If you’re a beginner and very interested in doing a DIY job for home afterward, woodworking can be fun. If you do not have the proper information, instruction, and ability, you may wind up spending more money and time than you initially intended to spend. As a novice woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential factors that you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you must first have to be somewhat interested in woodworking. Making something new with your own hands is a special sense. Don’t begin a project if you are not interested, because this might land you in a terrible location.

2. Consider the main reason behind making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and analyze the time that you have, before you start with a job.

4. Start projects which you’re able to complete. If you are in the middle of a work, then it is wise to not start any project at all.

How to Become a Master Woodworker From Your Own Home Woodworking Project Book

If you keep these essential things in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking jobs that you wish to begin with. As a newcomer, always pick a project which has a very basic build up or a simple construction. A few easy to begin projects include, bird feeder, benches, shelves, etc.. The moment you find the techniques, you can always proceed into the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning jobs should keyword be complicated and less bothersome so you have a better knowledge of working with forests and their tools. Once the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Woodworking Project Book

Tools are the means whereby you will win the battle of woodworking. Many men and women think that power tools are needs. However, for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much simple for you. When you buy a hammer, always assess the balance between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws out there on the market. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them can help you in advance woodworking. You can also purchase keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it might make work simpler for you in a later stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed price on woodworking projects. Based on the type of project you would like to finish, pricing can be determined. The simple the project, the less price it involves. But at the beginning buying the tools will probably be somewhat hefty. Therefore, it’s better to resolve a budget on the resources, then keyword on the undertaking. Buying the basic tools will make certain you do not have to buy any more material other than the timber ply.

Time and Instructions

Directions are among the principal things that every newcomer should follow. Instructions manual is very easy to comprehend the process, what to do and the way to do it. It keyword is a systematic manual for completing the project. Time also plays an important role in the construction of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most indispensable thing keyword which can allow you to achieve success is proper planning. With proper planning and a plan, it is possible to achieve success immediately. If you understand the objective of woodworking, then the thing you want to build, the tools you need to own and the typical time you can devote daily; then you are all set to go.

Conclusion, Woodworking Project Book

All these strategies and instruction will create the woodworking projects and strategies for novices quickly to complete. Always ensure that you have all the essential tools, materials, space ready. Keep the instructions for building an item handy. Appropriate strategy and planning will allow you to earn a fantastic woodworking project for your home.

|

The Benefits of Woodworking Woodworking Project Book

Folks if you’re looking for a way to pass time or want an alternative method to make money they generally turn to a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based company. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you need to be very careful when choosing which job to start out with since there are projects which can be too difficult for a beginner. But don’t worry about that because we will provide you guidelines on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, therefore before you choose your job you have to be aware of whether you’ve got the available tools to work on that project. Try not to spend a lot of cash on purchasing equipment when starting out, purchase more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there will be no gap between the hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Project Book

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking in your home will give you time to explore unique jobs and learn so many things. That’s why it’s very important to invest less money when starting out so you can afford to make errors and at some time learning about different jobs.
It is very important you know about different kinds of wood available for creating jobs. Anticipate carpenters utilize several types of wood quality for decorating bits, learning what kind of wood they use can help you prepare the wood you will need for specific projects you may want to pursue.
As soon as you understand the basics of wood choice and the use of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do will help you in creating good projects to satisfy your wants.

Woodworking Project Book practice makes perfect so be sure that you practice your work daily if possible. Try out a lot of designs using various tools so you may find the hang of using the tools. When starting out you can earn a number of errors but with time you will find out how to correctly use them and create quality projects.

|

Starting Your First Woodworking Shop Woodworking Project Book

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimum amount of gear and equipment. A small home workshop can generate a broad array of simple projects which can allow you to develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let’s discuss where you will perform your woodworking, Depending on the size of your home, you may have the ability to produce a dedicated space into your woodworking activities. This might be a reserved spot on your garage or in your cellar. In some cases, a detached shed or outbuilding might be ideal to set up your first shop. A heated shop detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels into the living area of your house. This is very true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the upper levels of the home. Another advantage of detached workshops is, of course, the noise level. You can work without bothering the rest of the household. A fantastic compromise might be the garage of your home.

This can help decrease the difficulties of dust and sound, however depending on where you reside, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Woodworking Project Book

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Woodworking Project Book if you can have a dedicated place for a workshop all the better. Floor tools and bench top gear can stay in position from project to project. If this installation isn’t hopeless, at least try to make a chair area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. At the start, set up a seat area where you can store and use most of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf below the seat to house your hands power tools along with a pegboard above the seat to hang additional equipment. Put in a woodworking vice at one end of your seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Project Book

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, then buy your quality tools at your local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. You will find plenty of quality lightly used tools out there that belong to individuals who embarked on that 1 molding job around the house or received tools as presents that they will never use. You can usually purchase tools for these sellers for less than half the initial price and save even more money should you make a bundle deal for all their unused equipment. Of course, getting tools from private people will require extra time and perhaps travel expenditures. Weigh out the benefits of traveling across town to save a couple extra bucks on a inexpensive piece of equipment. The extra expense of time and travel in these situations is usually justified when buying large ticket items like table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal quantity of hand gear yet generated sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of tools and prevent lamenting about the gear you wished you had.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and affect security. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You may avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often known as a skill saw after the favorite name, this can end up being the most versatile instrument in a start-up workshop. In fact, in the hands of an expert, a power hand saw could be employed to construct an whole property. Eventually, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your next project. After selecting the right saw install an excellent blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot only cut corners. It is perfect for cutting holes in timber also like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want on your workshop. Buy an range of quality carbide tipped drill bits which are kept in a holder tagging each drill bit size. Make a habit of returning every drill bit to its prospective slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries happen. Even though the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable handle. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind typically comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more appropriate for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you will likely upgrade to a floor model disk and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface area. As you embark on your first few projects you’ll discover that your palm sander using just a little bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll find this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber pieces. {Begin with a standard amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, superior clamps are expensive and it usually requires the novice woodworker a few years to accumulate a comprehensive set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the longest clamps that you could afford. You may get in touch with them for smaller adhesive jobs and expand them to their full length for larger projects.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer you quick release mechanisms that enable the user to rapidly open and close the limbs with no tedious handle rotation. The wood clamping surfaces on your vice will periodically require replacement. I prefer to use soft walnut in my vices which will not crush or damage many of the different woods that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Buy a good excellent name brand tape measure with a broad tape usually in the 25-foot range. Even though in your shop you might not be using the tape at these lengths, the bigger tape steps offer more rigid tapes which will not flop around and slide off the ending of planks. Assessing when you are on your own will be a lot simpler, and naturally, quality tape measures can last for several decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other handy tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will assist you in marking the ideal angles in addition to chemical angles. Get the number two and three Robertson set. I find the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood documents. The expense of glue through all of your projects is a minor cost consideration. For that reason, it makes sense to decide on the best. I also have discovered over the years that I get the best results with both indoor and outdoor projects once I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Woodworking Project Book

The peaceful gratification of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved careers. With a minimal investment at the most rudimentary tools and equipment, anyone can learn the rewarding skills of his time-tested hobby and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects