Woodworking Project Plan | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those qualities alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they’re following because all the thoughts and jobs Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many might still appear unsure if they should be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the right option. There are in fact many things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. People who are just getting started will discover the thoughts and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s simple step-by-step instructions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will have the ability to locate any job of their choice within this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it will be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large size. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found across the net. Ted has done his very best to guide them in every possible way he can, through simple to understand textual directions, clear pictures and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find inside. Therefore, it’s definitely worth buying!

The Benefits of Woodworking Woodworking Project Plan

Woodworking is 1 hobby that can also be a rewarding career if you love to work with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a nice woodworking craftsman, you will be able to build all types of furniture, (table, beds, and chairs), with ease. After that you can sell your completed woodworking jobs and make a handsome profit. Woodworking Project Plan.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you’ll be able to build some really wonderful furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living space. It will be a subject of conversation whenever you have friends come over to see. They will ask: How can you create it? How long can it take to complete the project? What type of wood did you use? What kind of tools did you use? How on earth did you make such a gorgeous item of furniture? As you discuss your work, a feeling of pride will come over you and do not be surprised if your friends ask you to make one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Project Plan

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to begin in Woodworking? Woodworking Project Plan.

Start with an idea in your mind of what you want to construct and then get a really good woodworking project plan that is geared toward beginners. There are several small woodworking projects for beginners available for purchase from online woodworking retailers. A couple of woodworking program suggestions to get you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to name a couple. Of course, you can start out with as expansive a woodworking plan as you choose. On the other hand, the odds are if you start out with a little woodworking project initially, you’ll get a better chance of keyword finishing the project.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the amount and variety of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your immediate or upcoming project. This is important especially if you are a beginner and just beginning. Tools are not affordable. The beginner needs good woodworking tools, but it is simple to break the bank purchasing a lot of tools you may not use all that often. If you do buy tools, buy quality. Do a little research and compare products. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not forget the wood glue and a brush to spread the wood adhesive! Of course, you’ll need a dry area to work and might require a pair of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools , but the idea is to buy the essential hand and power tools which novices will need. You may always add to your toolbox as you get experience!

Woodworking Project Plan Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you are not certain about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Every month the authors in woodworking magazines do a story about how best to increase your woodworking craft. Whether it’s showing you the way you can apply an end to a finished project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is purchasing educational DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Project Plan

If you are just beginning and very interested in doing a DIY project for home then, woodworking could be fun. If you don’t have the proper information, education, and skill, you might wind up spending more time and money than you initially meant to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having said, there are a couple of essential aspects that you need to keep in mind, before starting with any woodworking project.

1. If you are a beginner, you should first need to be somewhat interested in woodworking. Making something new with your hands is a particular feeling. Do not begin a project if you’re not interested, because this might land you at a terrible place.

2. Think of the primary reason behind making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your abilities and examine the time you have, until you start with a project.

4. Start jobs that you’re able to finish. If you are in the midst of a work, then it’s better to not begin any project at all.

Finding Woodworking Projects and Plans for Beginners Woodworking Project Plan

If you maintain these essential things in your mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to opt for the woodworking projects you want to begin with. As a beginner, always pick a job that has a very basic construct up or a very simple structure. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. The moment you find these techniques, you could always proceed to the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Project Plan

Tools are the ways whereby you can win the struggle of woodworking. Many men and women think that power tools are requires. But for beginners, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters considerably simple for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws out there in the market. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Having all of them can help you in advance woodworking. You can also purchase keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this isn’t a tool for novices, but using it would make work simpler for you at a later stage.

7. Drill – Drill makes it possible to create holes in timber. Low wattage power drills can make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed cost on woodworking jobs. Based on the type of project you would like to complete, pricing can be determined. The simple the job, the less cost it involves. But at the beginning purchasing the tools will be somewhat hefty. Because of this, it’s better to fix a budget first on the resources, then keyword on the undertaking. Buying the fundamental tools will make certain you do not need to purchase any more material aside from the timber ply.

Time and Directions

Instructions are among the principal things which every beginner should follow. Instructions guide is quite easy to comprehend the process, what to do and how to do it. Time also has a significant role in the building of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword that can allow you to achieve success is proper preparation. With proper planning and a plan, it’s likely to achieve success quickly. If you understand the objective of woodworking, the item that you want to construct, the tools you require to own and the typical time it’s possible to devote every day; then you are all set to go.

Conclusion, Woodworking Project Plan

These tips and instruction is likely to create the woodworking projects and strategies for beginners quickly to finish. Always ensure that you have all of the essential tools, materials, area ready. Keep the instructions for constructing an item handy. Appropriate strategy and preparation can allow you to earn a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Woodworking Project Plan

People when looking for a way to pass time or want an alternate method to generate money they generally turn to a hobby that they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of projects one can consider. When starting out you have to be very cautious when choosing which job to start out with because you will find projects that may be too difficult for a newbie. But don’t worry about that because we will give you guidelines on the ideal means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, so before you choose your job you have to be aware of whether you’ve got the available tools to work on that project. Try not to invest a good deal of cash on purchasing gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the artistic hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Project Plan

Woodworking at home will provide you time to research different projects and learn a lot of things. That’s why it’s very important to invest less money when starting out so that you can afford to make mistakes and at any time learning about different jobs.
It’s extremely important that you know about the different types of wood available for making jobs. Anticipate carpenters utilize several types of wood quality for decorating bits, learning which type of wood that they use can allow you to prepare the wood you’ll need for certain jobs you may want to pursue.
Once you know the basics of wood choice and the usage of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good jobs to satisfy your needs.

Woodworking Project Plan practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of layouts using a variety of tools so you may get the hang of working with the tools. When starting out you may make a range of mistakes but with time you will find out how to correctly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Project Plan

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimum amount of gear and equipment. A small home workshop may produce a wide array of simple projects that will allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products that you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s talk about where you’ll do your woodworking, based on the dimensions of your house, you might have the ability to create a dedicated space to your woodworking tasks. This may be a reserved spot on your garage or in your cellar. In some cases, a detached shed or outbuilding might be ideal to set up your very first shop. A heated store detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air returns located in the basement draw up dust into the upper levels of the house. Another benefit of detached workshops would be, of course, the noise level. You can work without bothering the remainder of the family. A good compromise could be the garage of your home.

This might help minimize the difficulties of dust and sound, however based on where you live, a keyword garage layout might not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Woodworking Project Plan

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Woodworking Project Plan if you’re able to have a dedicated spot for a workshop all the greater. Floor tools and bench top gear can stay in place from project to project. If this setup is not impossible, at least try to create a bench area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. In the beginning, set up a bench area where you are able to shop and use the majority of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf below the seat to house your hands power tools and a pegboard above the bench to hang other equipment. Install a woodworking at one end of the seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Project Plan

The reach of your start-up equipment will be mostly based on your financial plan. Whether you have got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools at the local building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local advertisements. You will find an abundance of quality lightly used programs out there which belong to people who stumbled on that one molding job around the home or obtained tools as presents that they won’t ever use. You can usually purchase tools for all these sellers for less than half the initial cost and save even more money should you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and possibly travel expenses. Weigh the benefits of traveling across town to save a few added dollars on a inexpensive piece of gear. The extra expense of time and travel in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand equipment yet produced sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a very simple ball cap with my ear muffs and eye protection. I’m keeping the dust from my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw after the popular brand name, this can end up being the most flexible instrument in a startup workshop. In fact, in the hands of a professional, a power hand saw can be used to construct an entire house. As mentioned earlier get a quality manufacturer saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you even start your second project. After choosing the right saw put in a quality blade. Most saws include a starter blade of lower quality even if they are a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument cannot only cut corners. It is perfect for cutting holes in wood also like manage slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need on your workshop. Purchase an assortment of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its prospective slot in the holder after each use. Last, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents occur. Even though the most ordinary, hammer injuries are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce scope for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might discover that your palm sander with a bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll find this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and correct any imperfections in wood bits. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a few years to collect a comprehensive set of timber clamps. Begin with a pair of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure remains the same. Get a set of the maximum clamps which you can spend. You may get in touch with them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enabled the user to rapidly open and close the jaws with no tedious handle rotation. The wood clamping surfaces in your vice will occasionally require replacement. I prefer to use soft pine in my vices that won’t crush or damage many of the various woods that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most frequently used tools. Purchase a fantastic excellent name brand tape measure with a broad tape typically from the 25-foot range. Although in your shop you may not use the tape in these spans, the bigger tape measures provide more rigid tapes that won’t flop around and slide off the end of planks. Measuring when you are by yourself will be a lot easier, and of course, quality tape steps can endure for several years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the timber.

What is Woodworking? How to Become a Master Woodworker From Your Own Home Woodworking Project Plan

Woodworking is known as the construction or the production of objects from wood. You can create a lot of different items from woodworking and these items can be as large as gazebos or as small as wooden toys. However large or small your personal project maybe you will be very likely to accomplish that aim with woodworking. In addition, woodworking has many private as well as psychological benefits! In the following article, I am going to briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

A lot of individuals who love to work with their hands have turned that love into a profession through woodworking. Individuals who build things from wood are usually known keyword because carpenters. Carpenters can work on a number of woodworking projects and job types. For instance, some carpenters own their carpentry business and these individuals have the luxury to set their job hours. This benefit allows carpenters the chance to spend more time with their families and also have less job stress. Raising kids is a really tough task no matter what way you approach the endeavor! To get a carpenter who possesses their own company, this job may not be hard because that individual will have more time to become a part of her or his child’s life. By playing a bigger role in the life of your child you’ll be having a larger influence on the type of character that child develops into, which is a huge concern for any loving parent. Besides these benefits, carpentry can also have health benefits too.

Finding Woodworking Projects and Plans for Beginners Woodworking Project Plan

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a whole lot. This causes more physical activity, which leads to better physical health. Maintaining your body physically fit is vital and keyword can help prevent the occurrence of various illnesses later on in life. By being physically fit you can decrease chances that you will have a heart attack, have seizures, become a diabetic, and lower the odds of giving birth to a number of other disorders.

Woodworking Project Plan, Do It Yourself Woodworking Saves Money:

I always feel like that I paid way too far when I visit home improvement stores and purchase patio furniture, and I am sure that I am not the only person who has felt like this! A successful small business owner once advised me to always increase the sales price of a product to double everything you got it for. This way, you always have the option to reduce the merchandise to 50 percent away and come out without getting any losses. This seems like it may be exactly the exact same tactic that home improvement shops use in selling their own wooden furniture solutions. Regardless, there’s a way that it is possible to get around paying the extra cash and that’s to do with building it yourself. Fortunately, there are some really good woodworking products offering thousands of detailed woodworking keyword strategies for countless different job types. So, you can really build anything you want or see in any home improvement store. Doing something does take a little bit of time but time is well spent when you end up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects