Woodworking Project Planner | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they are after because all the thoughts and projects Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still seem unsure whether they should be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more challenging to make the right option. There are actually lots of things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those who are only getting started will discover the ideas and projects in Ted’s package quite easy. Without doubt, complicated carpentry is involved; however, they will discover that it’s really simple to follow Ted’s easy step by step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to be able to find any job of their choice within this package quite readily, even though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who buy it’ll be endorsed by a 60-day guarantee, so when this woodworking package fails to meet them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Nonetheless, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker may be interested in building.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that are available across the net. Ted has done his very best to direct them in every conceivable way he can, through easy to comprehend textual instructions, clear pictures and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find within. So, it is definitely worth buying!

Starting Your First Woodworking Shop Woodworking Project Planner

Woodworking is 1 hobby that could also be a rewarding career if you love to work with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a fine woodworking craftsman, you will be able to build all types of furniture, (table, beds, and chairs), effortlessly. You can then sell your finished woodworking jobs and make a handsome profit. Woodworking Project Planner.

It requires time to become skilled in the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you’ll have the ability to build some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living room. It will be a topic of conversation whenever you have friends come over to see. They will ask: How did you create it? Where did you get the woodworking plans? Just how long did it take to finish the project? What type of wood did you use? What kind of tools did you use? Just how on earth did you create such a beautiful piece of furniture? As you discuss your job, a feeling of pride will come over you and don’t be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Project Planner

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Woodworking Project Planner.

Start with a concept in your mind of what you want to build and then get a excellent woodworking project plan that’s geared toward beginners. There are numerous little woodworking projects for novices available for purchase from online woodworking retailers. Obviously, you can begin with as grand a woodworking plan as you pick. On the other hand, the odds are if you start out with a little woodworking job at first, you’ll get a better prospect of keyword completing the project.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the quantity and variety of wood required, and the required hand tools and power tools to finish the project. Note: A word of caution about buying woodworking tools. Just buy what you want to finish your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not affordable. The newcomer needs good woodworking tools, but it is simple to break the bank purchasing a great deal of tools you might not use all that often. If you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood glue! Of course, you will need a dry place to work and may require a set of saw horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools which novices will need. You can always add to your toolbox as you get experience!

Woodworking Project Planner Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you are not certain about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the writers in woodworking publications do a story on how to improve your woodworking craft. Whether it’s showing you the way you can apply a finish to a finished job, or how to create a mortise and tenon joint, something new could be heard every month. Next, is purchasing educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Project Planner

If you’re a beginner and very enthusiastic about doing a DIY project for house then, woodworking can be fun. If you do not have the right information, instruction, and ability, you may wind up spending more money and time than you initially intended to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential aspects that you should remember, before beginning with any woodworking project.

1. If you are a beginner, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a special sense. Do not start a job if you are not interested, because this might land you at a bad location.

2. Think of the primary reason for making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your skills and analyze the time that you have, until you start with a job.

4. Start projects which you’re able to complete. If you’re in the midst of a work, then it is better not to start any project in any way.

Finding Woodworking Projects and Plans for Beginners Woodworking Project Planner

If you keep those essential points in your mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking projects you wish to start with. As a newcomer, always select a project which has a very basic construct up or a very simple structure. A few simple to start projects include, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you can always move into the next level of woodworking projects, like cabinets, sheds, and others. Beginning projects should always keyword be complicated and less frustrating so you have a better knowledge of working with forests and their resources. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Woodworking Project Planner

Tools would be the ways through which you will win the battle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much easy for you. When you buy a hammer, constantly check the equilibrium between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are different types of saws available on the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them can help you ahead of time woodworking. You might even purchase keyword power screwdrivers as they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much easy.

8. Additional small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking projects. Dependent on the type of project that you would like to complete, pricing can be determined. The simple the job, the less price it involves. But at the very beginning buying the tools will probably be a little hefty. Therefore, it’s better to resolve a budget first on the tools, then keyword on the project. Purchasing the fundamental tools will ensure that you don’t need to buy any more material aside from the timber ply.

Time and Directions

Directions are one of the primary things that every beginner should follow. Instructions manual is very easy to understand the procedure, what to do and how to do it. It keyword is a systematic guide for finishing the project. Time also plays a significant role in the building of woodworking projects. Woodworking projects require time and so it is crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. But the most indispensable thing keyword that can allow you to reach success is proper planning. With appropriate planning and a plan, it is possible to achieve success immediately. If you understand the objective of woodworking, the item you need to construct, the tools you require in order to own and the typical time it’s possible to devote daily; then you are ready to go.

Conclusion, Woodworking Project Planner

These strategies and instruction is likely to make the woodworking projects and strategies for novices quickly to finish. Always ensure that you have all the vital tools, materials, space prepared. Read the instructions for constructing an item handy. Proper strategy and preparation will help you to earn a great woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Project Planner

People when trying to find a way to pass time or want an alternative way to make money they usually turn to a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of projects one can think of. When starting out you have to be quite careful when choosing which project to begin with since there are jobs that can be too tough for a newbie. But do not worry about that because we will give you guidelines on the right way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, therefore before you pick your job you need to know if you have the available resources to work on such a project. Try not to invest a lot of cash on buying gear when starting out, purchase more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the hands.

Starting Your First Woodworking Shop Woodworking Project Planner

Woodworking at home will give you time to research unique jobs and find out so many things. That’s why it’s very important to spend less money when starting out so that you can afford to make mistakes and at some time learning about various jobs.
It is very important you know about different types of wood available for creating jobs. Anticipate carpenters utilize several types of wood quality for decorating bits, learning what type of wood that they use will help you prepare the wood you’ll need for certain projects you may want to pursue.
Once you know the fundamentals of wood selection and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in creating good projects to fulfill your needs.

Woodworking Project Planner practice makes perfect so be sure that you practice your work daily if possible. Try out lots of designs using various tools so you may find the hang of working with the tools. When starting out you can earn a range of errors but with time you will learn how to correctly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Woodworking Project Planner

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum amount of tools and equipment. A little home workshop can produce a broad variety of simple projects which will help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s talk about where you’ll do your woodworking, based on the size of your home, you may be able to create a dedicated space into your woodworking activities. This may be a reserved place in your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your first store. A heated store detached from your home provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement workshops will inevitably produce dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields located in the cellar draw up dust into the upper levels of the house. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without bothering the rest of the household. A good compromise might be the garage of your property.

This might help minimize the problems of dust and sound, however depending on where you reside, a keyword garage workshop may not be practical during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Woodworking Project Planner

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they add more space to function in. Woodworking Project Planner if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can remain in place from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment could be stored and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and gear. At the beginning, set up a bench area where you are able to shop and use the majority of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. That will let you work comfortably while standing. Insert a sturdy shelf below the bench to home your hand power tools and a pegboard above the seat to hang other gear. Install a woodworking at one end of your bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Project Planner

The scope of your startup equipment will be mostly based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, buy your quality tools in your regional construction and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other regional ads. There are plenty of quality gently used tools out there that belong to individuals who embarked on that 1 molding job around the home or obtained tools as gifts which they will never use. You can usually purchase tools for these sellers for under half the initial price and save even more money should you create a package deal for all their unused equipment. Obviously, getting tools from private individuals will require extra time and possibly travel expenses. Weigh the advantages of traveling across town to save a couple added dollars on a cheap piece of equipment. The extra cost of travel and time in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand equipment yet produced sophisticated and intricate pieces. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here’s a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of crucial safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire quicker when subjected to high noise levels. Select effective hearing protection which you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Often known as a skill saw after the popular brand name, this can prove to be the most flexible instrument in a start-up workshop. In fact, in the hands of a professional, a power hand saw can be used to construct an whole house. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your next project. After selecting the proper saw install a quality blade. Most saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Begin with a hybrid . These possess a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument cannot just cut curves. It is perfect for cutting holes in wood too like manage slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are much more flexible but a excellent floor unit can be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the standard 3/8 inch version. Through hard lessons learned, I have found that buying quality, in this scenario, is more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want on your workshop. Purchase an assortment of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after every use. Last, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce range for overall work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disc and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface space. As you embark on your first few projects you might find that your palm sander using just a little bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll find that this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and fix any imperfections in timber pieces. {Start with a typical number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally requires the novice woodworker a few years to accumulate a comprehensive set of wood clamps. Start with a pair of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the longest clamps which you can afford. You may contact them for smaller glue jobs and expand them to their full length for larger projects.

Shop Vice: A store vice installed in the end of the seat is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer quick release mechanisms that enable the consumer to rapidly open and close the jaws without dull handle turning. The wood clamping surfaces on your vice will periodically require replacement. I prefer to use soft pine in my vices that won’t crush or damage lots of the different forests that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of your most frequently used tools. Buy a fantastic excellent name brand tape measure with a broad tape typically from the 25-foot range. Although in your store you may not use the tape in these lengths, the bigger tape steps offer more rigid tapes which will not flop around and slide off the ending of boards. Measuring when you are on your own will be a great deal easier, and of course, quality tape measures can last for many years.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can assist you in marking the right angles in addition to compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking projects and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes along the way.

Adhesives: Not many glues are created equal. Avoid inexpensive home brands sold as carpenter’s glue. The expense of adhesive through all of your jobs is a minor cost consideration. Therefore, it is sensible to go with the very best. I have also found over the years that I get the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Woodworking Project Planner

The peaceful gratification of woodworking is an excellent experience in this day and age of rushed lives, smart phones, and time-starved careers. With a minimal investment in the most rudimentary tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Ron Swanson

Ronald Ulysses Swanson is a fictional character portrayed by Nick Offerman from the situation comedy television series Parks and Recreation on NBC, created by Greg Daniels and Michael Schur. In the series, Ron is the director of the Parks and Recreation department of fictional Pawnee, Indiana, and the immediate superior of series protagonist Leslie Knope (Amy Poehler) until Knope's election to the Pawnee City Council at the end of Season 4. In demeanor, political philosophy and work ethic, Knope and Swanson are very nearly polar opposites: where Knope is sunny and outgoing, decidedly liberal and constantly working, Swanson is distant, and as a staunch libertarian, is a strong advocate for small government—stating his belief that government should be privatized—and therefore believes that the parks department should not even exist.

Ron, who has an extremely deadpan and masculine personality, actively works to make city hall less effective and despises interacting with the public. He loves meat, woodworking, hunting, whisky, and breakfast foods. He hates and fears his two ex-wives, both named Tammy, one of whom is played by Offerman's real-life wife, Megan Mullally. Ron claims not to be interested in the personal lives of those around him but actually cares a great deal about his colleagues, and has a particularly strong respect for Leslie.

Conceived by series creators Michael Schur and Greg Daniels, Ron has been a central character since the pilot episode of Parks and Recreation. Offerman had some input into the character's creation, and some aspects of Ron's personality were inspired by the actor, like his affinity for woodworking and 16-year-old Lagavulin Single Malt scotch. The traits of the character were also partially inspired by a real-life Libertarian elected official in Burbank, California.[1][2]

Video: Woodworking Tools