Woodworking Project Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they’re after because most of the thoughts and projects Ted’s source are easy to understand and easy. Ted McGrath spent two years researching so he could collect enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking resource.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more difficult to make the ideal option. There are in fact lots of things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. Those that are just getting started will discover the thoughts and jobs in Ted’s bundle quite simple. No doubt, complicated carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s easy step-by-step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to locate any job of their choice within this package quite easily, though there so many options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who buy it’ll be endorsed by a 60-day warranty, so if this woodworking package fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large dimensions. Nonetheless, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that can be found across the net. Ted has done his best to direct them in every conceivable way he can, through easy to understand textual instructions, clear images and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more woodworking hand tools and much more woodworking power tools here, but the concept is to purchase the essential hand and power tools that beginners will need. You can always add to your arsenal as you gain experience!

Woodworking Project Plans Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. But if you’re not certain about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Each month the writers in woodworking publications do a story on how best to improve your woodworking craft. Whether it’s showing you how you can apply an end to a completed job, or how to create a mortise and tenon joint, something new could be learned each month. Next, is purchasing educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Project Plans

If you are a beginner and very interested in doing a DIY job for home afterward, woodworking could be fun. If you don’t have the right information, education, and ability, you may land up spending more time and money than you originally meant to spend. As a novice woodworker, you need to have time and the appropriate tools. Having mentioned, there are a couple of essential factors that you should keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Creating something new with your hands is a special feeling. Do not start a job if you’re not interested, because this might land you in a terrible location.

2. Think of the primary reason behind making this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and examine the time you have, until you begin with a job.

4. Start jobs which you can complete. If you are in the midst of a work, then it’s wise to not start any project in any way.

Starting Your First Woodworking Shop Woodworking Project Plans

If you maintain those essential things in mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking projects you want to begin with. As a newcomer, always select a job that has quite a basic construct up or a very simple construction. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always move into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning jobs should always keyword be less complicated and less bothersome so that you have a better comprehension of working with woods and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Project Plans

Tools would be the ways through which you can win the struggle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when mended with vises, offer ample space to work. As a primary tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters much easy for you. When you buy a hammer, constantly check the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws available on the market. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them can help you in advance woodworking. You can even buy keyword energy screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this is not a tool for novices, but using it might make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed cost on woodworking projects. Based on the type of job that you want to complete, pricing can be set. The simple the project, the less price it involves. But at the beginning purchasing the tools will be a little hefty. Because of this, it is better to resolve a budget first on the tools, then keyword on the project. Buying the fundamental tools will ensure that you do not need to purchase any more material aside from the wood ply.

Time and Directions

Instructions are one of the primary things that each and every beginner should follow. It is like the woodworking Bible. Instructions manual is very simple to comprehend the procedure, what to do and how to do it. It keyword is a systematic manual for completing the project. Time also plays a significant role in the building of woodworking jobs. Woodworking projects require time and so it is necessary for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword which will allow you to reach success is proper preparation. With proper planning and a strategy, it is possible to achieve success immediately. If you understand the objective of woodworking, the item that you need to construct, the tools you require in order to own and the typical time you can give every day; then you are ready to go.

Conclusion, Woodworking Project Plans

These tips and instruction is likely to make the woodworking projects and strategies for novices fast to complete. Always ensure you have all of the vital tools, materials, area ready. Read the instructions for building a product handy. Proper strategy and preparation will allow you to make a great woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Project Plans

Folks when looking for a way to pass time or desire an alternative way to generate money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based business. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you need to be quite careful when choosing which job to begin with since there are projects that can be too difficult for a beginner. But don’t worry about that because we will give you tips on the ideal way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you choose your job you have to be aware of whether you have the available tools to work on such a job. Try not to spend a good deal of money on purchasing gear when starting out, buy more equipment as you get more experience and become an expert carpenter. If you enjoy your hobby then there will be no difference between the artistic hand as well as the normal hands.

The Benefits of Woodworking Woodworking Project Plans

Woodworking at home will provide you time to research unique projects and find out a lot of things. That’s why it’s very important to invest less money when starting out so that you can manage to make errors and at any time learning about various projects.
It’s very important that you know about the different types of wood available for making projects. Anticipate carpenters use different types of wood quality for decorating pieces, learning which kind of wood that they use can help you prepare the wood you’ll need for specific projects you may want to pursue.
As soon as you know the basics of wood choice and the use of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in creating good jobs to fulfill your needs.

Woodworking Project Plans practice makes perfect so be sure that you practice your work every day if possible. Try out lots of designs utilizing various tools so you can find the hang of working with the tools. When starting out you can make a number of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Woodworking Project Plans

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal amount of gear and equipment. A small home workshop may generate a broad variety of simple projects that will help you develop your creative and building skills while rewarding you with artistic and practical wood products that you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us discuss where you will do your woodworking, based on the size of your home, you may be able to create a dedicated space into your woodworking tasks. This may be a reserved place on your garage or in your basement. In some cases, a detached shed or outbuilding might be ideal to set up your first store. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably create dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air returns found in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops is, of course, the noise level. You can work without bothering the remainder of the family. A good compromise might be the garage of your home.

This might help decrease the problems of dust and noise, however depending on where you reside, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Woodworking Project Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. Woodworking Project Plans if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top gear can remain in place from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and equipment. In the start, set up a bench area where you can store and use most of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Insert a sturdy shelf beneath the seat to home your hands power tools and a pegboard above the seat to hang other equipment. Put in a woodworking at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Project Plans

The scope of your startup equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, buy your quality tools at your local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local ads. There are an abundance of quality lightly used tools out there which belong to people who embarked on that one molding job around the house or received tools as gifts which they will never utilize. You can usually purchase tools for these sellers for under half the initial price and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private people will take extra time and possibly travel expenditures. Weigh the benefits of traveling across town to save a few added dollars on a cheap piece of equipment. The extra cost of time and travel in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal amount of hand gear yet produced sophisticated and complex pieces. Concentrate on developing your abilities with your start-up set of resources and prevent lamenting about the equipment you wished you had.
Here is a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire faster when exposed to high noise levels. These can include earplugs or full ear keyword muff protectors. I find a excellent set of ear muff protectors is perfect for hearing protection.

Lastly, wear a cap to keep the dust out of your hair. With this setup I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite name, this can end up being the most flexible tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be employed to construct an entire property. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you even start your second job. After selecting the proper saw put in an excellent blade. Most skill saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot only cut curves. It is ideal for cutting holes in wood too like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are even more flexible but a quality floor unit can be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Through tough lessons learned, I have found that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not need in your workshop. Purchase an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning every drill bit to its prospective slot in the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries occur. Although the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce scope for general work and a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle pretty much any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you’ll likely update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll find your palm sander with just a bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough planks using 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in theory, these tools allow you to taper edges, flatten high spots and correct any imperfections in wood pieces. {Start with a standard amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, good clamps are expensive and it normally requires the beginner woodworker a few years to collect a comprehensive set of wood clamps. Begin with a pair of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a set of the longest clamps which you could spend. You may get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enabled the user to quickly open and close the limbs without dull handle rotation. The timber clamping surfaces on your vice will periodically require replacement. I prefer to utilize soft pine in my vices which will not crush or damage many of the different woods that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of your most often used tools. Buy a good excellent name brand tape measure with a wide tape usually from the 25-foot selection. Although in your shop you might not be using the tape in these spans, the bigger tape steps offer more rigid tapes which will not flop around and slide off the end of planks. Assessing when you are on your own will be a great deal easier, and of course, quality tape steps can last for several decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can help you in marking the right angles in addition to compound angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes on the way.

Adhesives: Not many glues are created equal. Avoid inexpensive home brands marketed as carpenter’s glue. The expense of glue through all your projects is a little cost consideration. For that reason, it is sensible to decide on the very best. I have also discovered over the years that I get the best results with both indoor and outdoor projects once I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Woodworking Project Plans

The peaceful satisfaction of woodworking is a wonderful experience in this era of rushed lives, smart phones, and time-starved livelihood. With a minimum investment in the most rudimentary tools and equipment, anyone can learn the profitable skills of his time-tested avocation and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodcraft Supply

Woodcraft Supply, LLC operates woodworking specialty retail stores across the United States (including 34 of 50 U.S. states). It also publishes a woodworking industry magazine, distributes consumer catalogs (in all 50 U.S. states and 117 countries)[1] and operates an ecommerce website.[2] The stores, catalogs and website combined sell about 20,000 products covering wood working tools, raw materials, instructional media and project kits.[3][4][5][6]

In the 1960s, Roger Wells bought Woodcraft and moved the headquarters to Woburn, Massachusetts. Woodcraft moved into a warehouse and corporate office after the success of its initial printed ads which led to creation of its catalog. Sam Ross, founder of SBR Inc., bought Woodcraft in 1972 and used his retail experience to build new stores and grow the company. In 1992, Sam Ross moved Woodcraft headquarters to Parkersburg, West Virginia.[8][9]

Woodcraft opened a new Boston area corporate location in Walpole, Massachusetts in 2013. That same year, Woodcraft and the Swiss toolmaker Pfeil celebrated 50 years as international business partners.[12]

Video: Woodworking Tools