Woodworking Projects For Experts | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they are following because most of the ideas and jobs Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive package, and he ended up making a really’complete’ woodworking source.

Many might still seem unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more challenging to make the ideal choice. There are in fact lots of things that set Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. People that are only getting started will find the thoughts and jobs in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step by step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers are going to have the ability to find any project of their choice within this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it will be endorsed by a 60-day warranty, so if this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large dimensions. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to direct them in every possible way he could, through simple to understand textual directions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You may always add to your toolbox as you get experience!

Woodworking Projects For Experts Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Every month the writers in woodworking publications do a story on how to improve your woodworking craft. When it’s showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new can be learned every month. Next, is purchasing educational DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Projects For Experts

If you’re just beginning and very interested in doing a DIY job for home then, woodworking could be fun. If you don’t have the proper information, education, and skill, you may land up spending more time and money than you initially meant to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential factors that you need to keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first need to be somewhat interested in woodworking. Making something new with your hands is a particular feeling. Do not start a project if you’re not interested, as this may land you at a terrible location.

2. Think of the primary reason behind making this woodworking project. Choose the uses of this item you are making.

3. Consider your abilities and analyze the time that you have, until you begin with a project.

4. Start projects that you’re able to finish. If you are in the middle of some work, then it is better to not begin any project at all.

The Benefits of Woodworking Woodworking Projects For Experts

If you keep those essential points in your mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much as it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking jobs you want to start with. As a beginner, always pick a job which has a very basic construct up or a simple structure. Some easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you can always proceed to the next level of woodworking projects, such as cupboards, sheds, and others. Beginning projects should keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their resources. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Woodworking Projects For Experts

Tools would be the means through which you will win the struggle of woodworking. A lot of men and women believe power tools are requires. However, for novices, basic hand tools can be very handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters considerably easy for you. When you purchase a hammer, always assess the balance between the weight and endure. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available on the market. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You might also purchase keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but using it would make work easier for you in a later stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills will make the task much easy.

8. Other small and basic tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed price on woodworking projects. Dependent on the type of project that you want to finish, pricing could be set. The easy the job, the less price it involves. But at the beginning buying the tools will probably be somewhat hefty. Because of this, it is better to fix a budget first on the resources, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t need to buy any more material other than the wood ply.

Time and Directions

Directions are among the primary things which each and every beginner should follow. It is like the woodworking Bible. Instructions guide is very easy to understand the process, what to do and how to get it done. Time also has an important part in the building of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most indispensable thing keyword which will help you to reach success is proper planning. With appropriate planning and a strategy, it’s likely to achieve success immediately. If you understand the objective of woodworking, the item that you want to construct, the resources you require to possess and the typical time you can give every day; then you are all set to go.

Conclusion, Woodworking Projects For Experts

These strategies and instruction will make the woodworking projects and plans for novices quickly to complete. Always ensure you have all the vital tools, materials, area ready. Read the instructions for constructing a product handy. Proper strategy and preparation can allow you to make a great woodworking job for your property.

|

Starting Your First Woodworking Shop Woodworking Projects For Experts

People if you’re looking for a way to pass time or desire an alternative way to make money they usually turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can consider. When starting out you need to be quite cautious when choosing which project to begin with because there are projects that can be too tough for a newbie. But don’t worry about that since we will provide you tips on the ideal means to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, so before you pick your job you need to know if you’ve got the available tools to work on such a project. Try not to invest a lot of cash on purchasing equipment when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the hands.

Starting Your First Woodworking Shop Woodworking Projects For Experts

To keep yourself updated you must disseminate with different brands tools and woods. Woodworking at home will provide you time to explore different projects and find out a lot of things. That is why it’s important to invest less money when starting out so you can afford to make mistakes and at any time learning about various projects.
It’s extremely important you know about different types of wood available for creating jobs. Expect carpenters utilize different types of wood quality for decorating bits, learning which kind of wood they use will help you prepare the wood you will need for specific jobs you might choose to pursue.
As soon as you know the fundamentals of wood choice and the usage of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in creating good jobs to satisfy your wants.

Woodworking Projects For Experts practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of layouts utilizing various tools so you may find the hang of using the tools. When starting out you may earn a range of errors but with time you will find out how to properly utilize them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Woodworking Projects For Experts

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum number of tools and equipment. A small home workshop can produce a wide variety of simple projects that can allow you to develop your creative and construction skills while rewarding you with artistic and practical wood products that you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us talk about where you will do your woodworking, based on the dimensions of your home, you may have the ability to create a dedicated space into your woodworking tasks. This might be a reserved place in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated store detached from your house offers one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably produce dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air returns located in the cellar draw up dust into the top levels of the house. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without bothering the remainder of the household. A good compromise could be the garage of your home.

This might help decrease the difficulties of dust and noise, however based on where you live, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Woodworking Projects For Experts

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they add more space to work in. Woodworking Projects For Experts if you’re able to have a dedicated spot for a marathon all the better. Floor gear and bench top gear can remain in position from project to project. If this installation isn’t impossible, at least try to make a chair area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. At the beginning, set up a seat area where you are able to shop and use the majority of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will let you work comfortably while standing. Insert a sturdy shelf below the seat to home your hand power tools and a pegboard above the bench to hang other gear. Install a woodworking vice at one end of the seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Projects For Experts

The reach of your start-up equipment will be largely based on your financial plan. Whether you have got large financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, purchase your quality tools in your local building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative local advertisements. You will find an abundance of quality lightly used tools out there which belong to people who stumbled on that one molding job around the home or obtained tools as presents which they won’t ever utilize. You can usually buy tools for all these sellers for less than half of the original price and save even more money if you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and perhaps travel expenses. Weigh the advantages of traveling across town to save a few extra dollars on a cheap piece of equipment. The excess expense of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or high finished tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum quantity of hand equipment yet generated sophisticated and complex pieces. Focus on developing your skills with your startup set of tools and prevent lamenting about the gear you wished you had.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to high noise levels. Select powerful hearing protection that you find comfortable and effective. Last, put on a cap to keep the dust from your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. With this setup I’m protecting my eyes and my ears. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the favorite name, this can end up being the most flexible tool in a start-up workshop. In reality, at the hands of an expert, a power hand saw can be employed to construct an whole house. Eventually, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you start your second job. After choosing the right saw install a quality blade. Most saws come with a starter blade of lower quality even if they are a good saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade. These possess a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot only cut curves. It’s perfect for cutting holes in timber too like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are much more flexible but a excellent floor unit can be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life will be bad and to make matters worse keyless chucks come loose and slip often. This is one annoyance you do not need in your workshop. Purchase an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning each drill piece to its prospective slot at the holder after every use. Lastly, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Although the most frequent, hammer accidents are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a title brand quality hammer in the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you might discover your palm sander using just a little bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber bits. {Begin with a typical amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a few years to collect a detailed set of timber clamps. Start with a set of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure remains the same. Receive a set of the maximum clamps that you could afford. You may get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A store vice installed at the end of your bench is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enabled the consumer to quickly open and close the jaws without tedious handle turning. The timber beamed surfaces in your vice will occasionally need replacement. I prefer to utilize soft pine in my vices that won’t crush or damage many of the various woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most frequently used tools. Buy a fantastic quality name brand tape measure with a wide tape usually from the 25-foot range. Although in your store you might not use the tape in these spans, the bigger tape measures provide more rigid tapes which won’t flop around and slide off the end of boards. Measuring when you’re by yourself will be a great deal simpler, and naturally, quality tape steps can endure for many years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can assist you in marking the right angles in addition to compound angles. Get the number two and three Robertson set. I discover the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes along the way.

Adhesives: Not many glues are made equal. Stay away from cheap home brands marketed as carpenter’s glue. The expense of glue through all of your projects is a little cost consideration. Therefore, it makes sense to go with the best. I also have found over time that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Woodworking Projects For Experts

The peaceful gratification of woodworking is an excellent adventure in this era of rushed lives, smartphones, and time-starved careers. With a minimum investment at the most basic equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

April Wilkerson

Wilkerson graduated from college in 2012, after studying business management, and began working on projects to improve her house.[6] Her blog led to her creating YouTube videos in which she describes her process of figuring out how to build things such as a planter, a light above a pool table, an outdoor pressurized air line between shops, a porch, a coffee table, an outdoor shower, a holiday decoration made from an old whiskey barrel, various art projects, and so forth.[6][7][8] She doesn't describe herself as an "expert" but rather as a newcomer and teacher eager to share her newly acquired knowledge as she works on new projects.[6] Generally her projects involve woodworking, but she has done metalworking and welding as well.[6][2] Many of her projects use scrap lumber; she buys new tools when she needs them, and some sponsors of her YouTube channel have sent her tools and equipment for promotional purposes.[6] As of February 2019, her YouTube channel has over 900,000 followers [9]. Wilkerson completes many of her pieces in her 500 square foot workshop.[10]

Video: Woodworking Tools