Woodworking Projects For Kids | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they’re after because all the ideas and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many might still seem unsure if they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the ideal choice. There are in fact many things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People that are just getting started will discover the thoughts and projects in Ted’s bundle quite easy. No doubt, complicated carpentry is involved; however, they will find it really simple to follow Ted’s easy step by step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will have the ability to find any project of their choice in this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who buy it’ll be endorsed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that can be found throughout the net. Ted has done his best to guide them in every possible way he can, through easy to understand textual directions, clear pictures and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools , but the concept is to purchase the crucial hand and power tools that beginners will need. You may always add to your arsenal as you gain experience!

Woodworking Projects For Kids Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you are unsure about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Each month the authors in woodworking publications do a story on the best way to increase your woodworking craft. When it’s showing you how you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Projects For Kids

If you’re just beginning and very interested in doing a DIY job for home afterward, woodworking could be fun. If you do not have the right information, instruction, and ability, you may wind up spending more time and money than you originally intended to spend. As a novice woodworker, you need to have time and the appropriate tools. Having mentioned, there are a few essential factors you should keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a project if you are not interested, because this might land you in a bad location.

2. Think of the main reason behind creating this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and analyze the time that you have, until you begin with a job.

4. Start projects which you’re able to finish. If you are in the middle of a work, then it is better to not begin any project at all.

Finding Woodworking Projects and Plans for Beginners Woodworking Projects For Kids

If you keep those vital things in mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects you wish to begin with. As a beginner, always select a project that has a very basic construct up or a simple structure. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you find these techniques, you could always proceed to the next level of woodworking projects, such as cabinets, sheds, and others. Beginning jobs should keyword be complicated and less frustrating so that you have a better knowledge of working with woods and their resources. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Projects For Kids

Tools are the ways whereby you can win the struggle of woodworking. A lot of men and women think that power tools are needs. But for novices, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters considerably simple for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws available in the marketplace. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you ahead of time woodworking. You can also purchase keyword power screwdrivers as they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but using it would make work simpler for you in a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the task much simple.

8. Other small and basic tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed cost on woodworking jobs. Based on the sort of project that you would like to finish, pricing can be determined. The easy the project, the less price it involves. But at the beginning purchasing the tools will probably be somewhat hefty. Therefore, it is better to fix a budget first on the tools, then keyword on the project. Buying the basic tools will make certain you do not need to buy any more material aside from the timber ply.

Time and Instructions

Directions are among the primary things which each and every newcomer should follow. It is like the woodworking Bible. Instructions guide is quite simple to comprehend the procedure, what to do and the way to do it. It keyword is a systematic guide for finishing the project. Time also has a significant role in the construction of woodworking projects. Woodworking projects require time and therefore it’s necessary for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most indispensable thing keyword which can help you to achieve success is proper preparation. With proper planning and a plan, it is possible to achieve success immediately. If you know the purpose of woodworking, the thing you need to build, the resources you need to possess and the typical time it’s possible to devote daily; then you are ready to go.

Conclusion, Woodworking Projects For Kids

These tips and instruction is likely to create the woodworking projects and strategies for beginners quickly to finish. Always ensure that you have all the vital tools, materials, area ready. Keep the instructions for building an item handy. Appropriate strategy and preparation will allow you to make a great woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Woodworking Projects For Kids

People when trying to find a way to pass time or want an alternate way to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It’s very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of projects one can think of. When starting out you have to be very careful when choosing which project to begin with since you will find jobs that can be too difficult for a beginner. But do not be concerned about that since we are going to provide you guidelines on the ideal way to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, so before you pick your job you have to be aware of whether you’ve got the available tools to work on such a job. Try not to spend a lot of money on buying equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no difference between the hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Projects For Kids

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking at home will provide you time to explore different projects and find out so many things. That’s why it’s important to spend less money when starting out so that you can afford to make errors and at any time learning about different projects.
It’s extremely important that you know more about different kinds of wood available for making projects. Anticipate carpenters use different kinds of wood quality for decorating pieces, learning what type of wood they use will help you prepare the wood you’ll need for certain projects you may want to pursue.
As soon as you know the fundamentals of wood selection and the use of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to satisfy your wants.

Woodworking Projects For Kids practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of layouts utilizing a variety of tools so that you can find the hang of using the tools. When starting out you can make a range of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Projects For Kids

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal number of tools and equipment. A small home workshop may produce a broad array of simple projects which can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us talk about where you’ll perform your woodworking, Depending on the dimensions of your home, you might be able to produce a dedicated space into your woodworking tasks. This might be a reserved spot on your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated store detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably produce dust that travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields located in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops is, clearly, the noise level. It’s possible to work without bothering the rest of the household. A good compromise could be the garage of your home.

This might help decrease the difficulties of dust and noise, however depending on where you live, a keyword garage layout may not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Projects For Kids

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to work in. Woodworking Projects For Kids if you can have a dedicated spot for a workshop all the greater. Floor gear and bench top gear can stay in place from project to project. If this installation is not impossible, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and gear. In the beginning, establish a seat area where you can shop and use the majority of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf beneath the bench to home your hands power tools and a pegboard over the seat to hang other gear. Put in a woodworking vice at one end of your bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Projects For Kids

The reach of your start-up equipment will be largely based on your budget. Whether you have got large financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, purchase your quality tools at your local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other regional ads. There are an abundance of quality lightly used programs out there which belong to people who embarked on that 1 molding job around the home or obtained tools as gifts which they won’t ever use. You can usually buy tools for all these sellers for under half the original price and save even more money should you create a package deal for all their unused equipment. Of course, getting tools from private people will require extra time and perhaps travel expenditures. Weigh the advantages of traveling across town to save a couple added bucks on a inexpensive piece of equipment. The excess cost of time and travel in these situations is usually justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimum quantity of hand equipment yet produced sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of resources and avoid lamenting about the gear you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and influence safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uncomfortable.

The next piece of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire quicker when exposed to high noise levels. Select effective hearing protection which you find comfortable and effective. These may include earplugs or full ear keyword muff protectors. I find a quality pair of ear muff protectors is ideal for hearing protection.

Lastly, put on a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. I am keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw after the popular name, this may prove to be the most versatile instrument in a start-up workshop. In reality, in the hands of an expert, a power hand saw can be used to construct an entire property. Eventually, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your second project. After choosing the proper saw install a quality blade. Most skill saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut curves. It’s ideal for cutting holes in wood also like manage slots. Eventually, you’re going to want to get a band saw. Bandsaws are much more flexible but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not need on your workshop. Buy an assortment of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning every drill piece to its prospective slot at the holder after each use. Lastly, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents happen. Even though the most frequent, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the head and handle. The mind typically comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage just about any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you will probably update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might find your palm sander using a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll get this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in concept, these tools enable you to taper borders, flatten high spots and fix any imperfections in timber bits. {Begin with a typical number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually takes the novice woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a pair of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure remains the same. Receive a pair of the maximum clamps that you could spend. You can contact them for smaller glue jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enabled the user to rapidly open and close the limbs without tedious handle rotation. The timber clamping surfaces on your vice will periodically require replacement. I would rather utilize soft walnut in my vices which will not crush or damage many of the various forests that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among the most frequently used tools. Purchase a good excellent name brand tape measure with a wide tape usually from the 25-foot selection. Even though in your store you might not be using the tape in these lengths, the larger tape steps provide more rigid tapes that won’t flop around and slip off the end of planks. Assessing when you are by yourself will be a great deal simpler, and naturally, quality tape measures can last for many years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will assist you in marking the ideal angles in addition to chemical angles. Get the number three and two Robertson set. I discover that the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing little mistakes along the way.

Adhesives: Not many glues are created equal. Stay away from cheap home brands marketed as carpenter’s glue. The expense of adhesive through all of your projects is a minor cost consideration. For that reason, it is sensible to decide on the best. I also have discovered over the years that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Woodworking Projects For Kids

The peaceful gratification of woodworking is an excellent experience in this era of rushed lives, smartphones, and time-starved livelihood. With a minimum investment at the most rudimentary tools and equipment, anyone can learn the rewarding abilities of his time-tested hobby and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Norm Abram

Norman L. "Norm" Abram (born October 3, 1949) is an American carpenter known for his work on the PBS television programs This Old House and The New Yankee Workshop. He is referred to on these shows as a "master carpenter".

Abram was born in Woonsocket, Rhode Island,[1] and raised in Milford, Massachusetts. He attended high school in Milford.[2][3] and studied mechanical engineering and business administration at the University of Massachusetts Amherst,[3] where he became a brother of the Pi Lambda Phi fraternity.

After college, Abram worked for three years as a site supervisor for a multimillion-dollar New England-based construction firm. In 1976, Abram then went into business for himself, founding the general contracting firm Integrated Structures Inc.

Video: Woodworking Projects