Woodworking Projects Videos | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are following because most of the thoughts and projects Ted’s resource are simple to understand and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive package, and he ended up creating a really’complete’ woodworking resource.

Many might still seem unsure if they should be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. Those who are only getting started will discover the ideas and projects in Ted’s bundle quite simple. Without doubt, complicated carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s simple step by step directions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will be able to find any job of their choice in this package quite readily, even though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who purchase it will be backed by a 60-day warranty, so when this woodworking package fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large size. Nonetheless, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available throughout the net. Ted has done his very best to guide them in every conceivable way he could, through easy to understand textual instructions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

The Benefits of Woodworking Woodworking Projects Videos

Woodworking is one hobby that could also be a rewarding career if you like to work together with your hands and construct beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you will have the ability to construct all kinds of furniture, (beds, table, and chairs), with ease. You can then sell your completed woodworking jobs and make a handsome profit. Woodworking Projects Videos.

It requires time to become proficient at the craft of woodworking. The nice thing about working up to that expert craftsman level is you will be able to build some really wonderful furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living room. It will be a topic of conversation whenever you have friends come over to see. They’ll ask: How did you make it? Just how long can it take to finish the project? What kind of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you discuss your work, a sense of pride will come over you and also don’t be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Projects Videos

If you’re thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Woodworking Projects Videos.

Begin with a concept in mind of what you would like to construct and then get a excellent woodworking project plan that is geared toward beginners. There are several small woodworking projects for novices available for purchase from online woodworking retailers. Of course, you can start out with as expansive a woodworking program as you choose. On the other hand, the odds are if you start out using a little woodworking job at first, you will have a better prospect of keyword completing the job.

Your woodworking project plan should incorporate some lists! Length of: woodworking hardware, the quantity and variety of wood required, and the required hand tools and power tools to finish the project. Note: A word of warning about purchasing woodworking tools. Only buy what you want to finish your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools are not cheap. The beginner needs good woodworking tools, but it is simple to break the bank buying a great deal of tools you may not utilize all that frequently. When you do buy tools, buy quality. Do a little research and compare products. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood glue! Obviously, you’ll require a dry place to work and might require a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools which novices will need. You can always add to your toolbox as you gain experience!

Woodworking Projects Videos Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Every month the writers in woodworking publications do a story about the best way to improve your woodworking craft. When it’s showing you how to apply an end to a completed project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Projects Videos

If you are just beginning and very interested in doing a DIY project for home then, woodworking can be fun. If you do not have the proper information, education, and ability, you may land up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have time and the appropriate tools. Having said, there are a few essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you must first need to be somewhat interested in woodworking. Making something new with your own hands is a particular sense. Don’t start a project if you are not interested, because this might land you at a bad location.

2. Think of the main reason for making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and examine the time you have, until you start with a project.

4. Start jobs that you can finish. If you are in the midst of some work, then it is wise not to begin any project in any way.

The Benefits of Woodworking Woodworking Projects Videos

If you keep these essential things in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs that you want to begin with. As a newcomer, always pick a project that has a very basic construct up or a simple structure. Some simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you could always proceed into the next level of woodworking jobs, like cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less bothersome so you have a better knowledge of working with woods and their tools. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Woodworking Projects Videos

Tools are the means whereby you will win the battle of woodworking. A lot of men and women believe power tools are needs. But for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters much simple for you. When you purchase a hammer, always assess the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws out there in the market. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them will help you in advance woodworking. You might also buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for novices, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Additional small and basic tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed price on woodworking projects. Based on the type of project you want to finish, pricing could be set. The simple the job, the less price it involves. But at the very beginning buying the tools will probably be somewhat hefty. Because of this, it is better to resolve a budget on the tools, then keyword on the project. Buying the fundamental tools will make certain you do not have to buy any more material aside from the timber ply.

Time and Directions

Instructions are one of the principal things that every beginner should follow. It is like the woodworking Bible. Instructions guide is quite easy to comprehend the process, what to do and how to get it done. It keyword is a systematic manual for completing the project. Time also has an important role in the building of woodworking projects. Woodworking projects require time and therefore it is crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that can allow you to reach success is proper preparation. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you understand the objective of woodworking, the item that you want to build, the tools you need in order to possess and the typical time it’s possible to give daily; then you are ready to go.

Conclusion, Woodworking Projects Videos

These strategies and education is likely to create the woodworking projects and strategies for novices fast to finish. Always make sure that you have all of the vital tools, materials, area prepared. Read the instructions for building a product handy. Proper strategy and preparation will allow you to make a fantastic woodworking project for your property.

|

Starting Your First Woodworking Shop Woodworking Projects Videos

People if you’re looking for a way to pass time or desire an alternate method to generate money they generally turn into a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are lots of jobs one can consider. When starting out you have to be quite careful when choosing which job to start out with because there are projects that can be too tough for a beginner. But do not be concerned about that since we are going to provide you tips on the ideal means to start woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, therefore before you pick your project you have to be aware of if you have the available resources to work on that job. Try not to spend a good deal of cash on purchasing equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any difference between the hand and the hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Projects Videos

Woodworking at home will provide you time to explore different projects and find out a lot of things. That’s why it’s very important to spend less money when starting out so you can manage to make mistakes and at any time learning about different jobs.
It is extremely important you know about the different types of wood available for making jobs. Expect carpenters utilize different kinds of wood quality for decorating pieces, learning what kind of wood that they use can help you prepare the wood you will need for specific jobs you might want to pursue.
Once you understand the fundamentals of wood choice and the usage of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in creating good projects to satisfy your wants.

Woodworking Projects Videos practice makes perfect so be sure that you practice your work every day if at all possible. Try out a lot of layouts utilizing a variety of tools so you may find the hang of working with the tools. When starting out you may earn a number of errors but with time you will learn how to correctly use them and create quality projects.

|

The Benefits of Woodworking Woodworking Projects Videos

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimum number of gear and equipment. A little home workshop can produce a broad variety of simple projects that will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us talk about where you will do your woodworking, based on the dimensions of your home, you might have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved place in your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to set up your very first shop. A heated store detached from your home provides one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably produce dust that travels to the living area of your home. This is very true in homes with forced air heating systems where cold air returns found in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops is, of course, the noise level. You can work without disturbing the remainder of the household. A good compromise might be the garage of your home.

This can help minimize the problems of dust and noise, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Projects Videos

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to function in. Woodworking Projects Videos if you can have a dedicated place for a workshop all the greater. Floor tools and bench top equipment can remain in position from project to project. If this installation isn’t hopeless, at least try to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and gear. At the start, set up a seat area where you can store and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. That will let you work comfortably while standing. Add a sturdy shelf below the seat to house your hand power tools and a pegboard over the bench to hang other gear. Put in a woodworking at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Projects Videos

The scope of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, then purchase your quality tools in the local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional ads. There are plenty of quality lightly used tools out there which belong to people who stumbled on that one molding project around the home or received tools as gifts which they will never use. You can usually purchase tools for all these sellers for under half the original cost and save even more money should you make a bundle deal for all their unused equipment. Of course, acquiring tools from private people will take extra time and possibly travel expenses. Weigh out the advantages of traveling across town to save a couple extra dollars on a inexpensive piece of equipment. The extra cost of travel and time in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum amount of hand gear yet generated sophisticated and complex pieces. Focus on developing your abilities with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here’s a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence safety. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together if you find them uneasy.

The next piece of critical safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire faster when subjected to elevated noise levels. Select powerful hearing protection that you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw after the popular name, this may prove to be the most versatile tool in a startup workshop. In reality, at the hands of a professional, a power hand saw can be employed to construct an entire property. Eventually, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget empowers him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your next job. After selecting the right saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a backup and install an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t only cut corners. It’s ideal for cutting holes in wood too like manage slots. Eventually, you’ll want to obtain a band saw. Bandsaws are much more versatile but a quality floor unit can be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the standard 3/8 inch version. Through tough lessons learned, I have found that purchasing quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their battery life tends to be bad and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need in your workshop. Purchase an range of quality carbide tipped drill bits which are kept in a holder tagging each drill bit size. Make a habit of returning every drill bit to its potential slot in the holder after every use. Last, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Although the most ordinary, hammer accidents are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for overall work and a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle just about any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on the first few projects you might discover that your palm sander using just a bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll find this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper edges, flatten high spots and fix any imperfections in timber pieces. {Start with a standard number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, superior clamps are costly and it usually takes the beginner woodworker a few years to collect a detailed set of wood clamps. Start with a pair of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure remains the same. Get a set of the maximum clamps that you could afford. You can contact them for smaller glue jobs and expand them to their full length for bigger jobs.

Shop Vice: A shop vice installed at the end of your bench is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the jaws without tedious handle turning. The timber clamping surfaces in your vice will periodically require replacement. I would rather use soft walnut in my vices which will not crush or damage many of the various woods that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of your most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape typically in the 25-foot range. Even though in your store you might not be using the tape at these lengths, the bigger tape steps provide more rigid tapes that will not flop around and slide off the end of boards. Measuring when you are by yourself will be a lot easier, and of course, quality tape steps can last for many decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber.

What is Woodworking? Starting Your First Woodworking Shop Woodworking Projects Videos

Woodworking is referred to as the building or the production of items out of wood. You can produce a lot of unique items from woodworking and these items can be as big as gazebos or as small as wooden toys. However big or small your private project maybe you’ll be very likely to accomplish that goal with woodworking. Additionally, woodworking has lots of personal in addition to psychological benefits! In this guide, I am going to briefly identify some of these benefits for you.

Woodworking as a Career:

A good deal of people who love to use their hands have turned that love into a career through woodworking. Individuals who build things out of wood are generally known keyword because carpenters. Carpenters can operate on a variety of woodworking projects and job types. For example, some carpenters possess their carpentry business and these individuals have the luxury to set their job hours. This advantage allows carpenters the chance to spend more time with their own families and also have less job stress. Raising kids is a very tough task regardless of what way you approach the task! To get a carpenter who possesses his or her own business, this task may not be hard since that individual is going to have more time to be a part of his or her child’s lifetime. By playing a bigger part in the life span of your child you’ll be having a greater impact on the type of personality that kid develops into, which is a huge concern for any loving parent. Besides these benefits, carpentry may also have health benefits too.

The Benefits of Woodworking Woodworking Projects Videos

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a whole lot. This causes more physical activity, which results in better physical health. Keeping your body physically fit is vital and keyword can help prevent the incidence of various illnesses in the foreseeable future life. By being physically healthy you can decrease chances that you will have a heart attack, have seizures, turned into a diabetic, and lower the odds of having a range of different disorders.

Woodworking Projects Videos, Do It Yourself Woodworking Saves Money:

I feel like I paid way too much when I go to home improvement shops and buy patio furniture, and I am certain that I’m not the only person who has felt like this! A successful business owner once told me to always increase the sales price of a commodity to double everything you’ve got it for. This way, you can always decrease the product to 50 percent away and come out without getting any losses. This sounds like it might be exactly the exact same tactic that home improvement shops use in selling their own wooden furniture products. Regardless, there is a way that you can get around paying the extra money and that’s to do with building it yourself. Fortunately, there are some really good woodworking products offering thousands of detailed woodworking keyword plans for countless different project types. Thus, you really can build whatever you need or see in any home improvement store. Doing something yourself does take a bit of time but the time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools