Woodworking Rack | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they’re following because most of the ideas and projects Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are in fact lots of things that set Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. People who are just getting started will find the ideas and projects in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; however, they will find it really simple to follow Ted’s easy step-by-step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to locate any project of their choice in this package quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who purchase it will be endorsed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large dimensions. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so comprehensive and vast that it contains just about every woodworking project a woodworker might be considering constructing.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available throughout the net. Ted has done his very best to direct them in every conceivable way he could, through easy to understand textual instructions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find inside. So, it is certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Rack

Woodworking is one hobby that can also be a rewarding career if you love to work together with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to build all kinds of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking jobs and make a handsome profit. Woodworking Rack.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to that expert craftsman level is you’ll be able to create some really wonderful furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living space. It’ll be a subject of conversation when you have friends come over to see. They’ll ask: How did you create it? Where did you get the woodworking plans? Just how long did it take to complete the project? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you discuss your work, a feeling of pride will come over you and also do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Rack

If you’re thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to Begin in Woodworking? Woodworking Rack.

Begin with an idea in mind of what you would like to build and then get a really good woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for beginners available for purchase from online woodworking retailers. Obviously, you can begin with as grand a woodworking program as you choose. However, the odds are if you start out using a little woodworking job at first, you will get a better prospect of keyword completing the job.

Your woodworking project plan should incorporate some lists! Length of: woodworking hardware, the quantity and variety of wood needed, and the required hand tools and power tools to complete the project. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not cheap. The newcomer needs good woodworking gear, but it is simple to break the bank buying a lot of tools you might not use all that frequently. When you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also don’t overlook that the wood glue and a brush to spread the wood glue! Of course, you will require a dry area to work and may require a set of saw horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools which novices will need. You may always increase your toolbox as you gain experience!

Woodworking Rack Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. But if you’re not certain about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines out there. Every month the authors in woodworking publications do a story about how to increase your woodworking craft. When it’s showing you the way you can apply an end to a finished project, or how to create a mortise and tenon joint, something new can be heard each month. Next, is buying educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

The Benefits of Woodworking Woodworking Rack

If you are just beginning and very interested in doing a DIY project for house then, woodworking can be interesting. If you do not have the proper information, instruction, and ability, you might land up spending more money and time than you originally meant to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a couple of essential factors that you should remember, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be very interested in woodworking. Creating something new with your hands is a particular feeling. Don’t start a project if you are not interested, as this may land you in a bad location.

2. Think of the primary reason for creating this woodworking project. Choose the uses of this item you’re making.

3. Consider your skills and examine the time that you have, until you start with a job.

4. Start projects which you can finish. If you are in the midst of some work, then it’s better to not begin any project in any way.

How to Become a Master Woodworker From Your Own Home Woodworking Rack

If you keep these vital points in mind before beginning a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you want to start with. As a newcomer, always pick a job that has a very basic build up or a simple construction. A few simple to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking jobs, like cupboards, sheds, and others. Beginning projects should keyword be complicated and less bothersome so that you have a better comprehension of working with forests and their resources. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Woodworking Rack

Tools would be the means through which you can win the battle of woodworking. A lot of men and women think that power tools are needs. But for novices, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when mended with vises, provide ample space to operate. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters considerably simple for you. When you purchase a hammer, always check the balance between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws out there in the marketplace. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them can help you ahead of time woodworking. You can also buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Additional small and basic tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking jobs. Based on the sort of project you would like to complete, pricing could be set. The easy the project, the less price it involves. However, at the beginning purchasing the tools will probably be a little hefty. Therefore, it’s much better to resolve a budget on the tools, then keyword on the project. Buying the basic tools will ensure that you don’t have to buy any more material other than the timber ply.

Time and Instructions

Directions are among the principal things which every beginner should follow. Instructions guide is quite easy to understand the process, what to do and the way to do it. It keyword is a systematic manual for completing the project. Time also has an important role in the construction of woodworking projects. Woodworking projects demand time and so it is crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword which can help you to achieve success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success immediately. If you understand the objective of woodworking, then the item that you need to construct, the resources you require in order to own and the average time it’s possible to devote every day; then you’re all set to go.

Conclusion, Woodworking Rack

All these strategies and education is likely to make the woodworking projects and strategies for novices fast to complete. Always ensure you have all the vital tools, materials, area prepared. Read the instructions for constructing a product handy. Appropriate strategy and planning can help you to earn a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Woodworking Rack

Folks if you’re looking for a way to pass time or desire an alternative method to generate money they usually turn into a hobby they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you need to be very cautious when choosing which job to start out with because you will find projects which may be too tough for a newbie. But do not worry about that since we will provide you guidelines on the ideal way to start woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, so before you choose your project you need to be aware of whether you’ve got the available tools to work on such a job. Try not to invest a lot of money on buying gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the hand and the hands.

Starting Your First Woodworking Shop Woodworking Rack

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking in your home will give you time to explore different jobs and find out so many things. That is why it’s important to spend less money when starting out so you can afford to make mistakes and at any time learning about various projects.
It’s very important you know about different kinds of wood available for making projects. Expect carpenters use different kinds of wood quality for decorating pieces, learning what type of wood they use can allow you to prepare the wood you will need for specific projects you may want to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in creating good jobs to fulfill your wants.

Woodworking Rack practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of layouts using a variety of tools so that you can get the hang of using the tools. When starting out you may make a range of mistakes but with time you will find out how to properly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Rack

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimal number of gear and equipment. A little home workshop can generate a wide array of simple projects which can help you develop your creative and building skills while rewarding you with artistic and practical wood products which you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s discuss where you will perform your woodworking, based on the size of your house, you might have the ability to create a dedicated space to your woodworking activities. This might be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your first shop. A heated store detached from your house provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust which travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the basement draw dust up into the upper levels of the house. Another benefit of detached workshops would be, clearly, the noise level. It’s possible to work without disturbing the rest of the household. A good compromise could be the garage of your home.

This might help minimize the difficulties of dust and sound, however based on where you reside, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Woodworking Rack

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Woodworking Rack if you’re able to have a dedicated spot for a marathon all the greater. Floor tools and bench top gear can stay in position from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment could be saved and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and gear. In the start, establish a seat area where you are able to store and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. That will let you work comfortably while standing. Add a sturdy shelf below the seat to home your hands power tools along with a pegboard over the seat to hang other gear. Install a woodworking vice at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Rack

The reach of your start-up equipment will be mostly based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, then purchase your quality tools at your regional construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. You will find an abundance of quality lightly used tools out there that belong to people who stumbled on that 1 molding project around the home or obtained tools as gifts that they will never use. You can usually purchase tools for these sellers for under half the initial cost and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will take additional time and perhaps travel expenses. Weigh the benefits of traveling around town to save a couple extra dollars on a inexpensive piece of equipment. The extra expense of time and travel in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand equipment yet generated sophisticated and intricate pieces. Focus on developing your abilities with your startup set of resources and prevent lamenting about the gear you wished you’d.
Here’s a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Purchase a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and influence security. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You may avoid wearing them all together in the event that you find them uncomfortable.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire quicker when subjected to high noise levels. Last, put on a cap to keep the dust from your hair. With this set up I am protecting my eyes and my ears. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw following the favorite brand name, this can prove to be the most flexible tool in a start-up workshop. In reality, in the hands of an expert, a power hand saw could be employed to construct an entire property. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you start your second job. After selecting the proper saw put in an excellent blade. Most skill saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Start with a hybrid . These possess a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot only cut corners. It is perfect for cutting holes in timber too like handle slots. At some point, you’ll want to get a ring saw. Bandsaws are even more flexible but a quality floor unit could be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Down the road, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have discovered that purchasing quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you do not need on your workshop. Buy an range of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Although the most frequent, hammer injuries are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface space. As you embark on the first few projects you’ll discover that your palm sander using just a bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll get this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in timber pieces. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it usually requires the beginner woodworker a few years to accumulate a detailed set of wood clamps. Begin with a set of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, but the structure is still the same. Receive a set of the maximum clamps that you can spend. You may contact them for smaller glue jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the limbs without dull handle turning. The timber clamping surfaces in your vice will periodically require replacement. I prefer to use soft walnut in my vices that will not crush or damage lots of the different forests that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among your most frequently used tools. Buy a fantastic excellent name brand tape measure with a broad tape usually in the 25-foot selection. Although in your store you might not use the tape in these spans, the bigger tape measures offer more rigid tapes that will not flop around and slip off the ending of boards. Assessing when you’re on your own will be a great deal easier, and of course, quality tape measures can last for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood.

What is Woodworking? How to Become a Master Woodworker From Your Own Home Woodworking Rack

Woodworking is referred to as the building or the creation of objects from wood. It is possible to create a lot of unique items from woodworking and these items can be as big as gazebos or as small as wooden toys. No matter how large or small your personal project maybe you’ll be very likely to accomplish that aim with woodworking. In addition, woodworking has many personal as well as emotional benefits! In this guide, I will briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

People who build things out of wood are generally known keyword because carpenters. Carpenters can work on a variety of woodworking projects and job types. For instance, some carpenters own their carpentry business and these folks have the luxury to place their job hours. This advantage allows carpenters the opportunity to spend more time with their own families and have less job strain. Raising kids is a very difficult task regardless of what way you approach the task! For a carpenter who possesses his or her own business, this job might not be as hard because that person is going to have more time to become a part of his or her child’s lifetime. By playing a bigger role in the life span of your child you will be having a larger impact on the type of personality that kid develops into, which is a massive concern for any loving parent. In addition to these benefits, carpentry can also have health benefits as well.

How to Become a Master Woodworker From Your Own Home Woodworking Rack

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a lot. This results in more physical activity, which results in better physical health. Maintaining your body physically fit is vital and keyword will help prevent the occurrence of various illnesses later on in life. By being physically fit you can reduce chances that you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of giving birth to a number of other illnesses.

Woodworking Rack, Do It Yourself Woodworking Saves Cash:

I feel as I paid way too much when I go to home improvement shops and purchase patio furniture, and I am certain that I am not the only person who has felt this way! A successful small business owner once advised me to always increase the sales price of a commodity to double what you’ve obtained it for. In this manner, you can always decrease the merchandise to 50 percent away and come out without acquiring any losses. This sounds like it may be exactly the same tactic that home improvement stores use in selling their wooden furniture solutions. Regardless, there’s a way that it is possible to get around paying the extra cash and that’s to do with building it yourself. Fortunately, there are some really excellent woodworking products offering thousands of comprehensive woodworking keyword plans for hundreds of different job types. So, you can really build whatever you need or see in any home improvement store. Doing something does require a little bit of time but time is well spent when you end up saving hundreds of dollars because of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

April Wilkerson

Wilkerson graduated from college in 2012, after studying business management, and began working on projects to improve her house.[6] Her blog led to her creating YouTube videos in which she describes her process of figuring out how to build things such as a planter, a light above a pool table, an outdoor pressurized air line between shops, a porch, a coffee table, an outdoor shower, a holiday decoration made from an old whiskey barrel, various art projects, and so forth.[6][7][8] She doesn't describe herself as an "expert" but rather as a newcomer and teacher eager to share her newly acquired knowledge as she works on new projects.[6] Generally her projects involve woodworking, but she has done metalworking and welding as well.[6][2] Many of her projects use scrap lumber; she buys new tools when she needs them, and some sponsors of her YouTube channel have sent her tools and equipment for promotional purposes.[6] As of February 2019, her YouTube channel has over 900,000 followers [9]. Wilkerson completes many of her pieces in her 500 square foot workshop.[10]

Video: Woodworking Tools