Woodworking Shop Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they are after because all the thoughts and jobs Ted’s resource are easy to understand and easy. Ted McGrath spent two years researching so he could collect enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more difficult to make the right option. There are in fact lots of things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. Those who are only getting started will discover the thoughts and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is involved; nonetheless, they will find it really easy to follow Ted’s simple step-by-step instructions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to be able to find any project of their choice in this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who purchase it’ll be endorsed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large dimensions. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the net. Ted has done his very best to direct them in every possible way he can, through simple to understand textual directions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find inside. Therefore, it’s certainly worth buying!

The Benefits of Woodworking Woodworking Shop Projects

Woodworking is 1 hobby that can also be a rewarding profession if you love to work with your hands and construct exquisite pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you will have the ability to construct all types of furniture, (beds, table, and chairs), with ease. After that you can sell your completed woodworking jobs and make a handsome profit. Woodworking Shop Projects.

It takes time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you’ll have the ability to build some really wonderful furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit in your living space. It will be a subject of conversation whenever you have friends come over to see. They’ll ask: How can you create it? Just how long did it take to finish the project? What type of tools did you use? Just how on earth did you create such a beautiful piece of furniture? As you speak about your work, a feeling of pride will encounter you and also don’t be surprised if your friends ask you to create one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Shop Projects

If you are thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to begin in Woodworking? Woodworking Shop Projects.

Begin with an idea in your mind of what you want to build then get a excellent woodworking project plan that is geared toward beginners. There are numerous small woodworking projects for novices available for sale from online woodworking retailers. Of course, you can begin with as expansive a woodworking plan as you choose. However, the chances are if you begin with a little woodworking project initially, you will get a better prospect of keyword finishing the project.

Your woodworking project plan should include some lists! Lists of: woodworking equipment, the amount and variety of wood needed, and the required hand tools and power tools to finish the undertaking. Note: A word of warning about purchasing woodworking tools. Just buy what you need to complete your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not cheap. The newcomer needs good woodworking gear, but it is simple to break the bank buying a lot of tools you may not use all that often. When you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t overlook that the wood glue and a brush to spread the wood glue! Of course, you’ll need a dry area to work and may need a pair of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and more woodworking power tools , but the concept is to purchase the crucial hand and power tools that beginners will need. You may always add to your toolbox as you gain experience!

Woodworking Shop Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. But if you’re not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Every month the authors in woodworking publications do a story about the best way to increase your woodworking craft. When it’s showing you the way you can apply an end to a finished job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is buying instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Woodworking Shop Projects

If you are just beginning and very interested in doing a DIY project for house then, woodworking can be interesting. If you do not have the proper information, education, and ability, you may land up spending more money and time than you initially meant to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects that you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first have to be very interested in woodworking. Making something new with your hands is a particular sense. Don’t begin a job if you’re not interested, because this might land you in a terrible location.

2. Consider the primary reason behind making this woodworking project. Choose the uses of this item you are making.

3. Consider your skills and analyze the time you have, before you begin with a job.

4. Start projects which you can finish. If you are in the middle of a work, then it is wise to not begin any project in any way.

The Benefits of Woodworking Woodworking Shop Projects

If you maintain these essential points in mind before beginning a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you want to start with. As a beginner, always pick a job which has quite a basic build up or a very simple structure. Some easy to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you could always proceed to the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning projects should keyword be complicated and less frustrating so you have a better knowledge of working with woods and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Shop Projects

Tools are the ways whereby you can win the battle of woodworking. A lot of men and women think that power tools are needs. But for beginners, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much easy for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws out there on the marketplace. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them will help you in advance woodworking. You can even buy keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for beginners, but using it would make work easier for you at a subsequent stage.

7. Drill – Drill helps you make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the task much easy.

8. Other small and basic tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed cost on woodworking projects. Based on the type of project that you would like to complete, pricing can be determined. The simple the project, the less cost it involves. But at the very beginning buying the tools will be somewhat hefty. Because of this, it is better to resolve a budget first on the resources, then keyword on the undertaking. Buying the basic tools will make certain you don’t have to buy any more material aside from the timber ply.

Time and Directions

Instructions are among the primary things which every beginner should follow. Instructions guide is very easy to understand the process, what to do and the way to do it. It keyword is a systematic guide for completing the job. Time also has a significant role in the building of woodworking jobs. Woodworking projects require time and so it’s crucial for a novice to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword which will help you to achieve success is proper planning. With appropriate planning and a plan, it’s possible to achieve success immediately. If you know the objective of woodworking, the item you want to build, the resources you require to own and the typical time it’s possible to give every day; then you are all set to go.

Conclusion, Woodworking Shop Projects

All these strategies and education will make the woodworking projects and plans for beginners quickly to complete. Always ensure you have all the vital tools, materials, area ready. Read the instructions for building an item handy. Proper strategy and planning can allow you to earn a great woodworking job for your home.

|

How to Become a Master Woodworker From Your Own Home Woodworking Shop Projects

People when looking for a way to pass time or want an alternative way to generate money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you need to be very careful when choosing which job to start out with since there are jobs that may be too tough for a beginner. But don’t be concerned about that since we will give you tips on the ideal means to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, therefore before you pick your job you need to be aware of whether you have the available resources to work on that project. Try not to spend a good deal of money on purchasing equipment when starting out, purchase more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any difference between the artistic hand and the normal hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Shop Projects

Woodworking at home will give you time to research different projects and find out so many things. That’s why it’s important to invest less money when starting out so you can manage to make mistakes and at any time learning about various projects.
It is extremely important you know more about different kinds of wood available for creating jobs. Anticipate carpenters utilize several kinds of wood quality for decorating bits, learning what type of wood they use will help you prepare the wood you will need for certain jobs you might want to pursue.
As soon as you know the basics of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to satisfy your needs.

Woodworking Shop Projects practice makes perfect so make sure you practice your work every day if possible. Try out lots of layouts using a variety of tools so you can find the hang of using the tools. When starting out you may earn a range of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Shop Projects

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimal amount of gear and equipment. A little home workshop can generate a broad array of simple projects which can help you develop your creative and construction skills while rewarding you with artistic and practical wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will perform your woodworking, based on the size of your home, you may have the ability to create a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to set up your very first store. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably produce dust that travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the remainder of the household. A fantastic compromise could be the garage of your home.

This might help decrease the difficulties of dust and sound, however based on where you live, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Woodworking Shop Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Woodworking Shop Projects if you can have a dedicated spot for a workshop all the better. Floor gear and bench top gear can stay in place from project to project. If this setup is not hopeless, at least attempt to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and gear. At the start, establish a seat area where you can shop and use the majority of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Add a sturdy shelf below the bench to home your hands power tools and a pegboard above the seat to hang additional gear. Put in a woodworking at one end of the bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Shop Projects

The scope of your start-up equipment will be largely based on your budget. Whether you have got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, purchase your quality tools at your local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional advertisements. There are plenty of quality lightly used programs out there which belong to individuals who stumbled on that one molding job around the house or received tools as gifts which they won’t ever utilize. You can usually purchase tools for these sellers for under half the original cost and save even more money if you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and possibly travel expenses. Weigh out the advantages of traveling across town to save a few added bucks on a inexpensive piece of gear. The excess cost of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum amount of hand gear yet produced sophisticated and complex bits. Focus on developing your skills with your startup set of resources and prevent lamenting about the equipment you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of crucial safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw after the popular brand name, this can prove to be the most versatile tool in a startup workshop. In reality, in the hands of a professional, a power hand saw can be employed to construct an entire house. At some point, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you start your next job. After choosing the proper saw put in a quality blade. Most saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut curves. It is ideal for cutting holes in timber too like manage slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that buying quality, in this scenario, is more critical than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you do not want in your workshop. Purchase an assortment of quality carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning every drill piece to its potential slot in the holder after each use. Last, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Even though the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll likely update to a floor model disc and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you’ll find that your palm sander using just a bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll find this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in theory, these tools allow you to taper borders, flatten high spots and fix any imperfections in timber pieces. {Begin with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a few years to accumulate a detailed set of wood clamps. Start with a pair of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure is still the same. Receive a pair of the longest clamps that you could afford. You can get in touch with them for smaller adhesive jobs and expand them to their full length for bigger jobs.

Shop Vice: A store vice installed in the end of your bench is perfect for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enabled the user to rapidly open and close the limbs without tedious handle turning. The timber clamping surfaces in your vice will occasionally need replacement. I would rather use soft walnut in my vices which will not crush or damage lots of the various woods that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most often used tools. Purchase a good quality name brand tape measure with a broad tape typically from the 25-foot selection. Even though in your shop you may not be using the tape in these lengths, the bigger tape steps provide more rigid tapes which won’t flop around and slide off the end of planks. Measuring when you are by yourself will be a lot easier, and of course, quality tape measures can endure for many years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles as well as compound angles. Get the number three and two Robertson set. I find that the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood documents. The expense of glue through all your projects is a minor cost consideration. For that reason, it is sensible to go with the best. I also have found over the years that I get the best results with both indoor and outdoor projects when I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Woodworking Shop Projects

The peaceful satisfaction of woodworking is a wonderful adventure in this era of hurried lives, smartphones, and time-starved livelihood. With a minimum investment at the most rudimentary equipment and tools, anyone can learn the profitable skills of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools