Woodworking Stand | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those attributes along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are following because most of the thoughts and projects Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up creating a truly’complete’ woodworking resource.

Many may still seem unsure whether they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more difficult to make the right choice. There are in fact many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. People who are only getting started will discover the ideas and jobs in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s easy step by step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to be able to locate any project of their choice within this package quite easily, though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it will be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large size. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the net. Ted has done his very best to guide them in every possible way he could, through easy to comprehend textual directions, clear pictures and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find inside. So, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools here, but the concept is to buy the essential hand and power tools which novices will need. You can always add to your arsenal as you get experience!

Woodworking Stand Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. However, if you are not certain about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the authors in woodworking publications do a story on the best way best to improve your woodworking craft. When it’s showing you how to apply an end to a finished project, or how to make a mortise and tenon joint, something new could be learned every month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodworking Stand

If you are a beginner and very interested in doing a DIY project for home afterward, woodworking could be fun. If you don’t have the proper information, education, and skill, you may wind up spending more time and money than you originally intended to spend. As a beginner woodworker, you want to have time and the correct tools. Having said, there are a couple of essential factors that you need to remember, before beginning with any woodworking project.

1. If you’re a beginner, you should first have to be somewhat interested in woodworking. Making something new with your hands is a special feeling. Don’t begin a job if you’re not interested, because this might land you in a terrible location.

2. Think of the primary reason for making this woodworking project. Choose the uses of this item you’re making.

3. Consider your skills and analyze the time you have, until you start with a project.

4. Start jobs which you can finish. If you are in the midst of a work, then it is better to not begin any project in any way.

Finding Woodworking Projects and Plans for Beginners Woodworking Stand

If you maintain those vital points in mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking projects you wish to start with. As a newcomer, always select a job that has a very basic construct up or a very simple structure. Some easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always move into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should keyword be complicated and less frustrating so that you have a better comprehension of working with forests and their resources. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Woodworking Stand

Tools would be the ways whereby you can win the battle of woodworking. A lot of men and women believe power tools are requires. But for novices, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when mended with vises, provide ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters much simple for you. When you purchase a hammer, always assess the equilibrium between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are different types of saws out there on the market. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them can help you in advance woodworking. You can also buy keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. However, this isn’t a tool for novices, but having it would make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed cost on woodworking jobs. Based on the type of job that you would like to finish, pricing can be set. The simple the job, the less cost it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Because of this, it’s much better to resolve a budget first on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you do not need to purchase any more material aside from the timber ply.

Time and Directions

Instructions are among the principal things that every beginner should follow. It is like the woodworking Bible. Instructions guide is quite simple to understand the procedure, what to do and the way to do it. Time also plays an important role in the building of woodworking projects. Woodworking projects require time and therefore it is necessary for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword which will help you to achieve success is proper preparation. With proper planning and a plan, it is likely to achieve success immediately. If you know the purpose of woodworking, then the item you need to construct, the resources you require in order to possess and the average time you can devote every day; then you’re ready to go.

Conclusion, Woodworking Stand

These tips and instruction will create the woodworking projects and strategies for novices quickly to finish. Always make sure that you have all of the essential tools, materials, space ready. Read the instructions for constructing an item handy. Proper strategy and planning will help you to earn a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Stand

People if you’re trying to find a way to pass time or desire an alternative method to generate money they usually turn into a hobby that they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are lots of projects one can think of. When starting out you need to be very careful when choosing which project to start out with because there are jobs which may be too tough for a newbie. But do not worry about that since we will provide you guidelines on the right way to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, therefore before you choose your job you need to be aware of whether you have the available resources to work on such a job. Try not to spend a good deal of cash on buying equipment when starting out, purchase more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will be no gap between the artistic hand and the hands.

The Benefits of Woodworking Woodworking Stand

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking at home will provide you time to explore unique jobs and learn so many things. That’s why it’s very important to spend less money when starting out so that you can afford to make errors and at some time learning about various jobs.
It’s extremely important that you know more about the different types of wood available for making projects. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning what type of wood that they use will help you prepare the wood you will need for certain jobs you might want to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can help you in creating good jobs to satisfy your needs.

Woodworking Stand practice makes perfect so make sure you practice your work daily if possible. Try out lots of designs utilizing a variety of tools so that you may find the hang of working with the tools. When starting out you may earn a number of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

The Benefits of Woodworking Woodworking Stand

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimum number of tools and equipment. A little home workshop can produce a wide variety of simple projects that will help you develop your creative and building abilities while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s talk about where you will perform your woodworking, Depending on the size of your home, you might be able to produce a dedicated space into your woodworking tasks. This might be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your first shop. A heated shop detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably create dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air returns found in the basement draw dust up into the upper levels of the home. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the rest of the family. A fantastic compromise might be the garage of your home.

This can help decrease the problems of dust and sound, however based on where you reside, a keyword garage workshop might not be practical during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Woodworking Stand

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they add more space to work in. Woodworking Stand if you can have a dedicated place for a workshop all the greater. Floor tools and bench top equipment can remain in place from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and gear. In the start, establish a bench area where you can store and use the majority of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Add a sturdy shelf below the bench to house your hands power tools and a pegboard over the bench to hang additional gear. Install a woodworking at one end of the bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Stand

The reach of your start-up equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, then purchase your quality tools at the regional building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative local advertisements. You will find plenty of quality lightly used programs out there which belong to individuals who stumbled on that one molding project around the house or obtained tools as gifts that they will never use. You can usually buy tools for these sellers for less than half of the original cost and save even more money should you create a bundle deal for all their unused equipment. Obviously, getting tools from private people will require additional time and possibly travel expenses. Weigh out the benefits of traveling across town to save a few added dollars on a inexpensive piece of gear. The excess cost of time and travel in these situations is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal quantity of hand gear yet generated sophisticated and complex bits. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and affect security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire quicker when subjected to high sound levels. These can contain earplugs or full ear keyword muff protectors. I find that a quality pair of ear muff protectors is perfect for hearing protection.

Lastly, wear a cap to keep the dust from your hair. With this set up I’m protecting my eyes and my ears. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often known as a skill saw after the popular brand name, this can prove to be the most versatile instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw can be employed to build an whole house. Eventually, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you start your second project. After selecting the right saw install an excellent blade. Most skill saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot just cut corners. It’s ideal for cutting holes in timber also like handle slots. At some point, you’ll want to obtain a band saw. Bandsaws are even more versatile but a quality floor unit can be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the standard 3/8 inch model. Through tough lessons learned, I have found that buying quality, in this case, is much more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slide often. This is one annoyance you do not want on your workshop. Buy an assortment of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries happen. Even though the most ordinary, hammer accidents are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce scope for overall work and a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface area. As you embark on the first few projects you might find your palm sander using just a little bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this grade of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in theory, these tools allow you to taper edges, sew high stains and correct any imperfections in timber bits. {Start with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a few years to accumulate a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure remains the same. Get a pair of the longest clamps that you can spend. You may get in touch with them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed at the end of the bench is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer quick release mechanisms that enable the user to rapidly open and close the limbs with no tedious handle turning. The timber clamping surfaces on your vice will occasionally need replacement. I would rather use soft pine in my vices that will not crush or damage many of the different woods that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of your most frequently used tools. Buy a good excellent name brand tape measure with a wide tape usually in the 25-foot selection. Even though in your shop you might not use the tape in these lengths, the bigger tape measures provide more rigid tapes which will not flop around and slip off the ending of boards. Assessing when you are by yourself will be a lot easier, and of course, quality tape measures can last for many decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will help you in marking the right angles in addition to chemical angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works best for many woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. The expense of glue through all of your jobs is a little cost consideration. Therefore, it is sensible to decide on the best. I have also discovered over time that I get the best results with both indoor and outdoor jobs when I use quality outside grade adhesive. All these resin-based compounds unlike conventional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Woodworking Stand

The peaceful gratification of woodworking is a wonderful adventure in this era of hurried lives, smartphones, and time-starved careers. With a minimal investment at the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking joints

Joinery is a part of woodworking that involves joining together pieces of timber or lumber, to produce more complex items. Some wood joints employ fasteners, bindings, or adhesives, while others use only wood elements. The characteristics of wooden joints - strength, flexibility, toughness, appearance, etc. - derive from the properties of the materials involved and the purpose of the joint. Therefore, different joinery techniques are used to meet differing requirements. For example, the joinery used to construct a house can be different from that used to make puzzle toys, although some concepts overlap.

This must be taken into account when joining wood parts together, otherwise the joint is destined to fail. Gluing boards with the grain running perpendicular to each other is often the reason for split boards, or broken joints. Furniture from the 18th century, while made by master craftsmen, did not take this into account. The result is this masterful work suffers from broken bracket feet, which was often attached with a glue block which ran perpendicular to the base pieces. The glue blocks were fastened with both glue and nails, resulting in unequal expansion and contraction between the pieces. This was also the cause of splitting of wide boards, which were commonly used during that period.

In modern woodworking it is even more critical, as heating and air conditioning cause major changes in the moisture content of the wood. All woodworking joints must take these changes into account, and allow for the resulting movement.[3]

Video: Woodworking Tools