Woodworking Stores | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re following because all the ideas and jobs Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many might still seem unsure if they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more difficult to make the ideal choice. There are in fact many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. Those who are only getting started will discover the thoughts and jobs in Ted’s package quite simple. Without doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers are going to have the ability to find any job of their choice in this bundle quite readily, even though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it will be endorsed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Nonetheless, using a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast that it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking bundle created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to direct them in every possible way he can, through simple to understand textual directions, clear pictures and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find within. Therefore, it is definitely worth buying!

Starting Your First Woodworking Shop Woodworking Stores

Woodworking is 1 hobby that can also be a rewarding profession if you like to work with your hands and construct beautiful pieces of furniture from timber. When you learn the woodworking crafts and become a fine woodworking craftsman, you’ll be able to construct all types of furniture, (table, beds, and chairs), with ease. You can then sell your completed woodworking projects and make a handsome profit. Woodworking Stores.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman level is you’ll have the ability to build some really nice furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living room. It will be a subject of conversation when you have friends come over to see. They’ll ask: How can you make it? Where did you get the woodworking programs? How long can it take to finish the job? What kind of tools did you use? Just how on earth did you make such a gorgeous item of furniture? As you discuss your work, a sense of pride will encounter you and also do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Stores

If you’re thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Woodworking Stores.

Begin with a concept in mind of what you would like to construct then get a excellent woodworking project plan that is geared toward beginners. There are several small woodworking projects for novices available for purchase from online woodworking retailers. A few woodworking plan suggestions for you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to mention a couple. Of course, you can begin with as expansive a woodworking plan as you choose. On the other hand, the odds are if you start out using a little woodworking project initially, you will get a better chance of keyword completing the job.

Your woodworking project plan must incorporate some lists! Lists of: woodworking equipment, the quantity and type of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about buying woodworking tools. Only buy what you need to finish your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not cheap. The beginner needs good woodworking tools, but you can easily break the bank buying a great deal of tools you might not utilize all that often. If you do buy tools, buy quality. Do a little research and compare products. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t forget the wood glue and a brush to spread the wood adhesive! Of course, you’ll require a dry place to work and might need a pair of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and much more woodworking power tools here, but the idea is to purchase the essential hand and power tools that novices will need. You can always add to your toolbox as you get experience!

Woodworking Stores Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Every month the writers in woodworking magazines do a story on how to increase your woodworking craft. Whether it is showing you how you can apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodworking Stores

If you’re a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking could be interesting. If you do not have the proper information, education, and skill, you might wind up spending more money and time than you originally meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential aspects you should remember, before beginning with any woodworking project.

1. If you’re a beginner, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Do not start a job if you’re not interested, because this might land you in a terrible place.

2. Consider the primary reason for making this woodworking project. Choose the uses of this thing you are making.

3. Consider your abilities and examine the time that you have, until you begin with a project.

4. Start jobs which you can finish. If you are in the middle of a work, then it’s better not to start any project in any way.

Finding Woodworking Projects and Plans for Beginners Woodworking Stores

If you maintain those vital things in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking projects that you want to begin with. As a newcomer, always pick a job which has a very basic construct up or a simple construction. Some easy to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you find the techniques, you could always move into the next level of woodworking jobs, like cabinets, sheds, and others. Beginning jobs should keyword be less complicated and less bothersome so you have a better comprehension of working with forests and their resources. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Stores

Tools would be the ways through which you can win the battle of woodworking. A lot of people think that power tools are needs. But for beginners, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much easy for you. When you buy a hammer, constantly check the balance between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws available in the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them can help you ahead of time woodworking. You might also buy keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but using it might make work easier for you in a later stage.

7. Drill – Drill helps you make holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s not any fixed cost on woodworking jobs. Dependent on the sort of job you want to complete, pricing can be set. The easy the project, the less price it involves. However, at the beginning purchasing the tools will be somewhat hefty. Because of this, it’s much better to fix a budget on the resources, then keyword on the project. Buying the basic tools will make certain you don’t have to purchase any more material other than the timber ply.

Time and Instructions

Directions are among the principal things that each and every beginner should follow. Instructions guide is very simple to comprehend the process, what to do and the way to get it done. Time also has a significant part in the construction of woodworking jobs. Woodworking projects require time and therefore it is necessary for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most indispensable thing keyword that will help you to reach success is proper preparation. With proper planning and a strategy, it is likely to achieve success quickly. If you know the objective of woodworking, the thing that you need to build, the tools you need to own and the typical time you can devote daily; then you’re all set to go.

Conclusion, Woodworking Stores

All these tips and instruction will create the woodworking projects and plans for novices quickly to finish. Always ensure that you have all the essential tools, materials, area prepared. Keep the instructions for building an item handy. Proper strategy and planning will allow you to make a fantastic woodworking project for your property.

|

The Benefits of Woodworking Woodworking Stores

Folks when looking for a way to pass time or want an alternative method to make money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based company. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you have to be very careful when choosing which job to start out with since you will find projects which may be too tough for a beginner. But don’t be concerned about that since we are going to provide you tips on the ideal way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, therefore before you choose your job you need to be aware of if you have the available resources to work on that project. Try not to spend a good deal of cash on purchasing equipment when starting out, purchase more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will not be any gap between the artistic hand and the hands.

Starting Your First Woodworking Shop Woodworking Stores

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking in your home will give you time to research different projects and learn a lot of things. That’s why it’s very important to invest less money when starting out so you can manage to make mistakes and at some time learning about various jobs.
It’s extremely important that you know more about different types of wood available for making projects. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning what type of wood that they use can allow you to prepare the wood you will need for specific jobs you may choose to pursue.
As soon as you know the fundamentals of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good projects to fulfill your wants.

Woodworking Stores practice makes perfect so be sure you practice your work every day if possible. Try out a lot of designs utilizing various tools so you may get the hang of working with the tools. When starting out you may make a range of errors but with time you will learn how to correctly use them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Woodworking Stores

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You can begin on a shoestring with a minimum amount of gear and equipment. A small home workshop can produce a wide array of simple projects which will allow you to develop your creative and building skills while rewarding you with practical and artistic wood products that you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us talk about where you’ll do your woodworking, based on the dimensions of your home, you may be able to create a dedicated space into your woodworking activities. This may be a reserved place on your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to set up your first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably create dust which travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the cellar draw dust up into the upper levels of the home. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the remainder of the household. A good compromise might be the garage of your home.

This can help minimize the problems of dust and sound, however based on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

Starting Your First Woodworking Shop Woodworking Stores

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they include more space to work in. Woodworking Stores if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top gear can remain in position from project to project. If this installation is not impossible, at least attempt to create a bench area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and equipment. At the beginning, establish a seat area where you can shop and use most of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf beneath the seat to house your hand power tools and a pegboard over the seat to hang other gear. Install a woodworking at one end of the seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Stores

The reach of your startup equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, purchase your quality tools in your local building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local advertisements. There are an abundance of quality gently used tools out there that belong to people who stumbled on that 1 molding project around the home or obtained tools as presents which they will never use. You can usually buy tools for these sellers for less than half of the initial cost and save even more money should you make a package deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and possibly travel expenses. Weigh the advantages of traveling around town to save a few added bucks on a inexpensive piece of gear. The extra expense of time and travel in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum quantity of hand equipment yet generated sophisticated and complex bits. Concentrate on developing your abilities with your startup set of tools and prevent lamenting about the gear you wished you had.
Here is a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence security. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together if you find them uncomfortable.

The next bit of critical safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. With this setup I’m protecting my eyes and my ears. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw after the popular brand name, this can prove to be the most versatile instrument in a startup workshop. In fact, in the hands of an expert, a power hand saw could be employed to construct an whole house. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These tend to cut back and will burn out before you start your next project. After choosing the right saw install an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a good saw. Keep this blade for a backup and install a quality blade with carbide teeth. Begin with a hybrid blade. All these possess a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t only cut curves. It is perfect for cutting holes in wood also like manage slots. At some point, you’re going to want to obtain a band saw. Bandsaws are even more versatile but a quality floor unit can be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the standard 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not need on your workshop. Buy an range of quality carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents happen. Although the most frequent, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for general work and a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These types of hammers are more suited to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage just about any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you will probably update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll discover your palm sander with just a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an extra source of 100 grit paper. You’ll get this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in theory, these tools allow you to taper borders, flatten high spots and correct any imperfections in timber bits. {Begin with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually requires the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, but the structure remains the same. Receive a pair of the longest clamps which you can afford. You may contact them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the consumer to quickly open and close the jaws without dull handle turning. The timber clamping surfaces on your vice will periodically require replacement. I prefer to utilize soft pine in my vices that won’t crush or damage lots of the various forests that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of the most frequently used tools. Purchase a fantastic quality name brand tape measure with a broad tape typically in the 25-foot range. Even though in your shop you might not be using the tape at these spans, the larger tape steps provide more rigid tapes which will not flop around and slide off the ending of boards. Assessing when you are on your own will be a lot simpler, and of course, quality tape measures can endure for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can assist you in marking the ideal angles in addition to compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover that the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood documents. The expense of adhesive through all of your jobs is a little cost consideration. For that reason, it makes sense to go with the very best. I also have discovered over time that I get the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Woodworking Stores

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of hurried lives, smartphones, and time-starved careers. With a minimum investment in the most basic equipment and tools, everyone can learn the rewarding abilities of his time-tested hobby and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodcraft Supply

Woodcraft Supply, LLC operates woodworking specialty retail stores across the United States (including 34 of 50 U.S. states). It also publishes a woodworking industry magazine, distributes consumer catalogs (in all 50 U.S. states and 117 countries)[1] and operates an ecommerce website.[2] The stores, catalogs and website combined sell about 20,000 products covering wood working tools, raw materials, instructional media and project kits.[3][4][5][6]

In the 1960s, Roger Wells bought Woodcraft and moved the headquarters to Woburn, Massachusetts. Woodcraft moved into a warehouse and corporate office after the success of its initial printed ads which led to creation of its catalog. Sam Ross, founder of SBR Inc., bought Woodcraft in 1972 and used his retail experience to build new stores and grow the company. In 1992, Sam Ross moved Woodcraft headquarters to Parkersburg, West Virginia.[8][9]

Woodcraft opened a new Boston area corporate location in Walpole, Massachusetts in 2013. That same year, Woodcraft and the Swiss toolmaker Pfeil celebrated 50 years as international business partners.[12]

Video: Woodworking Tools