Woodworking Supply Store | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re following because most of the thoughts and projects Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure if they should be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are in fact many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. Those who are only getting started will find the ideas and projects in Ted’s package quite simple. No doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s simple step by step instructions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to have the ability to locate any job of their choice within this package quite readily, though there so many options.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it’ll be backed by a 60-day warranty, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large dimensions. Nonetheless, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that can be found across the internet. Ted has done his best to guide them in every possible way he could, through easy to understand textual instructions, clear images and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find inside. Therefore, it’s certainly worth buying!

The Benefits of Woodworking Woodworking Supply Store

Woodworking is 1 hobby that can also be a rewarding career if you like to work with your hands and construct beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you will have the ability to build all types of furniture, (table, beds, and chairs), effortlessly. You can then sell your finished woodworking projects and make a handsome profit. Woodworking Supply Store.

It requires time to become proficient at the craft of woodworking. The nice thing about working up to that expert craftsman level is you will be able to create some really nice furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living room. It’ll be a topic of conversation when you have friends come over to visit. They’ll ask: How can you make it? Where did you get the woodworking programs? Just how long can it take to complete the project? What type of wood did you use? What type of tools did you use? How on earth did you make such a beautiful item of furniture? As you discuss your job, a feeling of pride will come over you and do not be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Woodworking Supply Store

If you are thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Woodworking Supply Store.

Start with an idea in mind of what you want to construct then get a excellent woodworking project plan that is geared toward novices. There are numerous little woodworking projects for beginners available for sale from online woodworking retailers. Of course, you can start out with as expansive a woodworking program as you pick. On the other hand, the chances are if you begin with a little woodworking project initially, you will get a better prospect of keyword completing the job.

Your woodworking project plan should include some lists! Length of: woodworking equipment, the amount and type of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of warning about buying woodworking tools. Only buy what you need to complete your instant or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools aren’t affordable. The beginner needs good woodworking gear, but you can easily break the bank buying a great deal of tools you might not use all that often. When you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood adhesive! Of course, you’ll need a dry place to work and might require a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and much more woodworking power tools here, but the idea is to purchase the crucial hand and power tools which beginners will need. You may always add to your arsenal as you gain experience!

Woodworking Supply Store Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the authors in woodworking publications do a story about the best way best to increase your woodworking craft. When it is showing you how to apply an end to a completed project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is purchasing instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Supply Store

If you are just beginning and very enthusiastic about doing a DIY job for home afterward, woodworking could be fun. If you don’t have the proper information, instruction, and skill, you might land up spending more time and money than you originally intended to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be very interested in woodworking. Making something new with your hands is a special sense. Don’t begin a job if you are not interested, as this may land you at a terrible location.

2. Think of the primary reason behind making this woodworking project. Decide on the uses of the item you’re making.

3. Consider your skills and analyze the time you have, before you begin with a project.

4. Start jobs which you’re able to finish. If you’re in the middle of a work, then it’s better not to start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Supply Store

If you keep these essential things in your mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking jobs that you wish to start with. As a beginner, always pick a project which has a very basic construct up or a very simple construction. A few simple to start projects include, bird feeder, benches, shelves, etc.. The moment you find the techniques, you could always proceed to the next level of woodworking projects, like cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better knowledge of working with woods and their tools. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Woodworking Supply Store

Tools are the means through which you can win the battle of woodworking. A lot of men and women believe power tools are requires. However, for beginners, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things much easy for you. When you purchase a hammer, constantly assess the balance between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws available in the marketplace. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them can help you in advance woodworking. You can also purchase keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. However, this isn’t a tool for beginners, but having it would make work easier for you in a later stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills will make the task much simple.

8. Other small and basic tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking jobs. Based on the type of project that you want to finish, pricing can be set. The simple the project, the less cost it involves. But at the beginning buying the tools will probably be somewhat hefty. Because of this, it is much better to fix a budget first on the tools, then keyword on the project. Buying the basic tools will ensure that you do not need to buy any more material aside from the timber ply.

Time and Directions

Instructions are one of the primary things which each and every newcomer should follow. Instructions manual is quite simple to comprehend the procedure, what to do and how to get it done. It keyword is a systematic guide for completing the job. Time also plays a significant role in the construction of woodworking projects. Woodworking projects require time and so it’s crucial for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword that can help you to achieve success is proper preparation. With proper planning and a plan, it’s possible to achieve success immediately. If you understand the purpose of woodworking, the item you want to construct, the resources you require in order to own and the typical time it’s possible to give daily; then you’re ready to go.

Conclusion, Woodworking Supply Store

These tips and instruction will create the woodworking projects and plans for novices fast to complete. Always make sure that you have all of the vital tools, materials, area ready. Keep the instructions for constructing a product handy. Proper strategy and preparation will allow you to earn a fantastic woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Supply Store

Folks when looking for a way to pass time or desire an alternative method to make money they usually turn into a hobby that they enjoy. Woodworking is one of the hobbies people turn to do as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of projects one can think of. When starting out you have to be quite careful when choosing which job to begin with since you will find projects which may be too tough for a newbie. But don’t worry about that since we will provide you tips on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you choose your project you have to know if you have the available resources to work on such a job. Try not to invest a good deal of money on purchasing gear when starting out, buy more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the artistic hand and the normal hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Supply Store

Woodworking in your home will give you time to research unique jobs and find out a lot of things. That’s why it’s very important to spend less money when starting out so you can manage to make errors and at any time learning about various jobs.
It is very important that you know more about different kinds of wood available for creating projects. Expect carpenters use several types of wood quality for decorating pieces, learning what kind of wood that they use can allow you to prepare the wood you’ll need for certain jobs you might want to pursue.
As soon as you know the basics of wood selection and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good jobs to fulfill your needs.

Woodworking Supply Store practice makes perfect so make sure you practice your work every day if at all possible. Try out lots of designs using various tools so that you may find the hang of using the tools. When starting out you may make a range of errors but with time you will find out how to correctly use them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Supply Store

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum number of tools and equipment. A little home workshop can generate a broad array of simple projects that will help you develop your creative and construction abilities while rewarding you with practical and artistic wood products which you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s talk about where you’ll perform your woodworking, based on the size of your home, you may be able to create a dedicated space into your woodworking activities. This might be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your very first store. A heated shop detached from your house provides one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably create dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields found in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops is, clearly, the sound level. You can work without disturbing the rest of the household. A good compromise might be the garage of your property.

This might help decrease the problems of dust and sound, however based on where you reside, a keyword garage workshop may not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Woodworking Supply Store

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they add more space to work in. Woodworking Supply Store if you can have a dedicated place for a marathon all the better. Floor tools and bench top gear can remain in place from project to project. If this setup is not hopeless, at least try to create a bench area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. In the beginning, set up a bench area where you can store and use most of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Add a sturdy shelf below the bench to house your hands power tools along with a pegboard above the seat to hang other equipment. Put in a woodworking at one end of your bench on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Supply Store

The scope of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools at the regional construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other local ads. You will find plenty of quality lightly used tools out there that belong to individuals who stumbled on that one molding job around the house or obtained tools as presents that they won’t ever utilize. You can usually buy tools for all these sellers for under half of the initial cost and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and perhaps travel expenditures. Weigh out the advantages of traveling around town to save a few extra dollars on a inexpensive piece of equipment. The extra expense of time and travel in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal quantity of hand equipment yet produced sophisticated and intricate pieces. Focus on developing your abilities with your startup set of tools and avoid lamenting about the gear you wished you had.
Here’s a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uneasy.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire faster when exposed to elevated sound levels. Last, wear a cap to keep the dust out of your hair. I prefer a very simple ball cap with my ear muffs and eye protection. With this setup I’m shielding my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw after the favorite brand name, this may end up being the most versatile instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw can be employed to construct an whole house. Eventually, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a funding enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second project. After selecting the proper saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they are a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Start with a hybrid . These possess a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut curves. It is ideal for cutting holes in timber too like manage slots. At some point, you’ll want to obtain a ring saw. Bandsaws are much more versatile but a quality floor unit could be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch version. Through tough lessons learned, I have found that buying quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you do not want in your workshop. Buy an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Make a habit of returning every drill bit to its potential slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high tech range offer ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The mind typically comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce scope for overall work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more appropriate to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disk and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface space. As you embark on the first few projects you might discover that your palm sander with just a bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll get this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper edges, flatten high spots and fix any imperfections in timber bits. {Start with a typical number 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, good clamps are costly and it normally requires the beginner woodworker a couple of years to collect a detailed set of wood clamps. Start with a set of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a set of the maximum clamps which you could spend. You may get in touch with them for smaller glue jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enabled the user to rapidly open and close the limbs with no tedious handle turning. The timber beamed surfaces in your vice will periodically require replacement. I prefer to utilize soft walnut in my vices which won’t crush or damage many of the various woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of your most often used tools. Buy a good quality name brand tape measure with a wide tape usually in the 25-foot range. Although in your shop you may not use the tape at these spans, the bigger tape steps provide more rigid tapes that won’t flop around and slide off the end of planks. Measuring when you’re by yourself will be a great deal simpler, and naturally, quality tape measures can endure for several years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can help you in marking the right angles in addition to chemical angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. The expense of adhesive through all your projects is a little cost consideration. Therefore, it is sensible to decide on the very best. I have also found over the years that I get the best results with both indoor and outdoor jobs once I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Woodworking Supply Store

The peaceful gratification of woodworking is a wonderful experience in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the profitable skills of his time-tested hobby and enjoy job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Woodcraft Supply

Woodcraft Supply, LLC operates woodworking specialty retail stores across the United States (including 34 of 50 U.S. states). It also publishes a woodworking industry magazine, distributes consumer catalogs (in all 50 U.S. states and 117 countries)[1] and operates an ecommerce website.[2] The stores, catalogs and website combined sell about 20,000 products covering wood working tools, raw materials, instructional media and project kits.[3][4][5][6]

In the 1960s, Roger Wells bought Woodcraft and moved the headquarters to Woburn, Massachusetts. Woodcraft moved into a warehouse and corporate office after the success of its initial printed ads which led to creation of its catalog. Sam Ross, founder of SBR Inc., bought Woodcraft in 1972 and used his retail experience to build new stores and grow the company. In 1992, Sam Ross moved Woodcraft headquarters to Parkersburg, West Virginia.[8][9]

Woodcraft opened a new Boston area corporate location in Walpole, Massachusetts in 2013. That same year, Woodcraft and the Swiss toolmaker Pfeil celebrated 50 years as international business partners.[12]

Video: Woodworking Tools