Woodworking Table Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they’re after because most of the ideas and projects Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so he could collect enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more difficult to make the ideal choice. There are in fact many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People who are only getting started will find the ideas and projects in Ted’s package quite easy. Without doubt, intricate carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s easy step-by-step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will have the ability to find any project of their choice within this bundle quite easily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it will be backed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so thorough and vast it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking bundle made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that can be found across the internet. Ted has done his best to guide them in every conceivable way he can, through simple to comprehend textual directions, clear images and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find within. Therefore, it’s definitely worth buying!

Starting Your First Woodworking Shop Woodworking Table Projects

Woodworking is one hobby that could also be a rewarding career if you love to work with your hands and build beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to build all kinds of furniture, (beds, table, and chairs), with ease. After that you can sell your completed woodworking projects and make a handsome profit. Woodworking Table Projects.

It takes time to become proficient in the craft of woodworking. The nice thing about working up to that expert craftsman degree is you will have the ability to create some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living space. It’ll be a subject of conversation whenever you have friends come over to see. They’ll ask: How can you make it? Just how long can it take to finish the job? What type of tools did you use? How on earth did you create such a gorgeous piece of furniture? As you speak about your job, a feeling of pride will encounter you and do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Table Projects

If you are thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Woodworking Table Projects.

Start with an idea in your mind of what you want to build then get a really good woodworking project plan that’s geared toward novices. There are several little woodworking projects for beginners available for purchase from online woodworking merchants. Of course, you can begin with as expansive a woodworking plan as you choose. However, the odds are if you start out with a little woodworking job at first, you’ll have a better chance of keyword finishing the project.

Your woodworking project plan should include some lists! Length of: woodworking hardware, the quantity and type of wood required, and the essential hand tools and power tools to finish the undertaking. Note: A word of caution about buying woodworking tools. Only buy what you need to complete your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools aren’t cheap. The newcomer needs good woodworking tools, but it is simple to break the bank buying a lot of tools you may not utilize all that frequently. When you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t overlook that the wood glue and a brush to spread the wood glue! Obviously, you’ll require a dry area to work and may require a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You can always increase your arsenal as you get experience!

Woodworking Table Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. However, if you’re unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the writers in woodworking magazines do a story about how best to improve your woodworking craft. Whether it’s showing you the way to apply a finish to a finished project, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodworking Table Projects

If you’re a beginner and very interested in doing a DIY job for home then, woodworking could be fun. If you do not have the proper information, instruction, and skill, you may land up spending more time and money than you initially intended to spend. As a novice woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you must first have to be very interested in woodworking. Making something new with your own hands is a particular sense. Do not begin a project if you’re not interested, because this might land you in a terrible place.

2. Think of the primary reason for making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your skills and analyze the time that you have, before you begin with a job.

4. Start jobs that you can complete. If you’re in the midst of some work, then it’s wise not to start any project in any way.

Starting Your First Woodworking Shop Woodworking Table Projects

If you keep those essential points in your mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you want to start with. As a beginner, always pick a job which has a very basic build up or a simple structure. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you find the techniques, you could always proceed into the next level of woodworking projects, such as cabinets, sheds, and others. Beginning projects should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their resources. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Woodworking Table Projects

Tools would be the means whereby you will win the battle of woodworking. A lot of men and women believe power tools are requires. However, for novices, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters considerably easy for you. When you purchase a hammer, always check the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws out there in the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You can even buy keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the job much simple.

8. Other small and basic tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed price on woodworking projects. Dependent on the type of project you would like to finish, pricing can be determined. The simple the project, the less price it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Therefore, it’s better to fix a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you don’t have to purchase any more material aside from the wood ply.

Time and Instructions

Instructions are among the principal things which each and every beginner should follow. Instructions manual is quite easy to comprehend the procedure, what to do and the way to get it done. Time also plays an important role in the construction of woodworking projects. Woodworking projects require time and therefore it is crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword that can help you to reach success is proper planning. With proper planning and a strategy, it is likely to achieve success quickly. If you know the objective of woodworking, then the item that you need to build, the tools you require to own and the typical time you can give every day; then you’re ready to go.

Conclusion, Woodworking Table Projects

These strategies and education will make the woodworking projects and strategies for novices quickly to finish. Always ensure you have all of the essential tools, materials, area prepared. Keep the instructions for building a product handy. Proper strategy and preparation can allow you to make a fantastic woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Table Projects

Folks if you’re trying to find a way to pass time or desire an alternate method to generate money they generally turn to a hobby that they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you have to be quite careful when choosing which project to begin with since there are jobs which can be too tough for a newbie. But do not worry about that since we are going to provide you guidelines on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, therefore before you choose your project you have to be aware of if you have the available resources to work on that project. Try not to invest a lot of money on purchasing gear when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will not be any difference between the hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Table Projects

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking in your home will give you time to explore different projects and find out so many things. That’s why it’s important to invest less money when starting out so you can manage to make errors and at any time learning about various jobs.
It is extremely important you know more about different kinds of wood available for creating projects. Anticipate carpenters use different types of wood quality for decorating pieces, learning what type of wood they use can help you prepare the wood you will need for certain jobs you might want to pursue.
Once you know the basics of wood selection and the use of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to satisfy your needs.

Woodworking Table Projects practice makes perfect so be sure you practice your work daily if possible. Try out a lot of layouts utilizing various tools so you may find the hang of using the tools. When starting out you may make a number of errors but with time you will find out how to correctly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Table Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum amount of tools and equipment. A small home workshop can produce a wide array of simple projects which can help you develop your creative and building abilities while rewarding you with artistic and practical wood products that you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s discuss where you will perform your woodworking, based on the size of your house, you may have the ability to produce a dedicated space to your woodworking activities. This may be a reserved spot in your garage or in your basement. In some cases, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably produce dust that travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the top levels of the home. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without disturbing the rest of the family. A fantastic compromise could be the garage of your home.

This can help decrease the difficulties of dust and sound, however based on where you reside, a keyword garage layout might not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Woodworking Table Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they include more space to function in. Woodworking Table Projects if you’re able to have a dedicated place for a workshop all the better. Floor gear and bench top gear can remain in place from project to project. If this installation isn’t impossible, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and gear. At the start, set up a seat area where you can shop and use the majority of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf beneath the bench to house your hand power tools and a pegboard above the bench to hang other equipment. Put in a woodworking vice at one end of the bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Table Projects

The reach of your start-up equipment will be largely based on your budget. Whether you have got big financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, then purchase your quality tools at your local building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local ads. You will find an abundance of quality lightly used programs out there which belong to individuals who embarked on that 1 molding job around the home or obtained tools as presents which they won’t ever utilize. You can usually buy tools for these sellers for under half the original price and save even more money if you make a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require extra time and perhaps travel expenditures. Weigh the advantages of traveling across town to save a few added bucks on a cheap piece of equipment. The excess expense of time and travel in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum amount of hand equipment yet generated sophisticated and complex bits. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the gear you wished you’d.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and influence safety. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this can prove to be the most versatile tool in a startup workshop. In reality, in the hands of a professional, a power hand saw can be employed to build an entire property. At some point, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your next project. After selecting the proper saw install an excellent blade. Most skill saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Start with a hybrid blade. These have a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument can’t only cut corners. It’s perfect for cutting holes in timber too like manage slots. Eventually, you’ll want to get a ring saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the conventional 3/8 inch version. Down the road, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slip often. This is one annoyance you do not need on your workshop. Buy an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries happen. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The mind usually comes loose and the tool becomes useless. Pick a title brand quality hammer in the 16-ounce range for general work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll probably upgrade to a floor model disc and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you’ll discover your palm sander using a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and fix any imperfections in wood pieces. {Start with a standard amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are costly and it normally takes the novice woodworker a few years to accumulate a detailed set of timber clamps. Begin with a set of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure is still the same. Get a pair of the longest clamps that you can afford. You can get in touch with them for smaller glue jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed at the end of your bench is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer rapid release mechanisms that enabled the consumer to quickly open and close the limbs with no dull handle turning. The wood clamping surfaces on your vice will periodically require replacement. I would rather utilize soft walnut in my vices which won’t crush or damage lots of the various woods that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most frequently used tools. Purchase a good quality name brand tape measure with a broad tape usually in the 25-foot range. Even though in your store you may not use the tape at these spans, the bigger tape steps provide more rigid tapes which will not flop around and slide off the end of planks. Measuring when you’re by yourself will be a great deal simpler, and of course, quality tape steps can endure for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can assist you in marking the ideal angles in addition to compound angles. Get the number three and two Robertson set. I discover the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes along the way.

Adhesives: Not all glues are created equal. Avoid cheap home brands marketed as carpenter’s glue. The cost of glue through all of your jobs is a little cost consideration. For that reason, it is sensible to go with the best. I also have discovered over time that I get the best results with both indoor and outdoor projects once I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Woodworking Table Projects

The peaceful satisfaction of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved careers. With a minimum investment at the most basic tools and equipment, everyone can learn the rewarding skills of his time-tested hobby and revel in job after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects