Woodworking Tool Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they are after because all the ideas and jobs Ted’s resource are easy to understand and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it more difficult to make the right choice. There are in fact many things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. People that are just getting started will find the thoughts and jobs in Ted’s bundle quite simple. Without doubt, complicated carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s simple step-by-step directions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to locate any project of their choice in this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who purchase it’ll be backed by a 60-day guarantee, so if this woodworking package fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large size. Yet, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to direct them in every possible way he can, through simple to understand textual instructions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find within. So, it is definitely worth buying!

Starting Your First Woodworking Shop Woodworking Tool Plans

Woodworking is 1 hobby that could also be a rewarding career if you like to work with your hands and construct beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to construct all kinds of furniture, (beds, table, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. Woodworking Tool Plans.

It takes time to become proficient at the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you will be able to create some really wonderful furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living space. It will be a topic of conversation when you have friends come over to visit. They’ll ask: How can you make it? Just how long did it take to finish the project? What type of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you discuss your job, a feeling of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Woodworking Tool Plans

If you are thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it is ideal for beginners!

Where to Begin in Woodworking? Woodworking Tool Plans.

Begin with a concept in mind of what you would like to construct then get a excellent woodworking project plan that is geared toward novices. There are several small woodworking projects for novices available for purchase from online woodworking retailers. A couple of woodworking program suggestions for you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to name a couple. Of course, you can begin with as grand a woodworking program as you pick. On the other hand, the chances are if you begin using a little woodworking job initially, you’ll have a better prospect of keyword completing the project.

Your woodworking project plan must include some lists! Lists of: woodworking equipment, the amount and variety of wood needed, and the essential hand tools and power tools to complete the undertaking. Note: A word of warning about buying woodworking tools. Just buy what you need to complete your instant or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking tools, but it is simple to break the bank purchasing a great deal of tools you may not use all that often. If you do buy gear, buy quality. Do a little research and compare products. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t forget that the wood glue and a brush to spread the wood adhesive! Obviously, you will need a dry place to work and might need a pair of saw horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools , but the idea is to buy the crucial hand and power tools that novices will need. You may always increase your toolbox as you gain experience!

Woodworking Tool Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Every month the writers in woodworking publications do a story about the best way best to improve your woodworking craft. When it’s showing you the way you can apply an end to a finished project, or how to create a mortise and tenon joint, something new could be learned each month. Next, is purchasing educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodworking Tool Plans

If you’re a beginner and very interested in doing a DIY project for home then, woodworking could be interesting. If you do not have the right information, instruction, and ability, you may land up spending more money and time than you initially intended to spend. As a novice woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential factors you should keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you must first have to be somewhat interested in woodworking. Creating something new with your hands is a special feeling. Do not begin a job if you are not interested, as this may land you in a bad location.

2. Consider the primary reason for creating this woodworking project. Choose the uses of the item you are making.

3. Consider your abilities and analyze the time that you have, before you start with a job.

4. Start projects which you can complete. If you are in the middle of a work, then it’s better to not begin any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Tool Plans

If you maintain those essential points in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking jobs you wish to start with. As a newcomer, always pick a job which has quite a basic construct up or a very simple structure. Some easy to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always proceed to the next level of woodworking projects, like cabinets, sheds, and others. Beginning jobs should keyword be less complicated and less bothersome so you have a better knowledge of working with woods and their resources. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Woodworking Tool Plans

Tools would be the ways whereby you can win the battle of woodworking. A lot of men and women believe power tools are needs. But for beginners, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when mended with vises, provide ample space to work. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably easy for you. When you purchase a hammer, always assess the equilibrium between the weight and endure. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws out there on the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them will help you ahead of time woodworking. You might also buy keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. However, this isn’t a tool for novices, but using it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and basic tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed cost on woodworking projects. Dependent on the type of project you want to complete, pricing could be determined. The simple the project, the less cost it involves. But at the very beginning buying the tools will probably be somewhat hefty. Therefore, it’s better to resolve a budget first on the tools, then keyword on the undertaking. Buying the basic tools will make certain you do not have to purchase any more material aside from the wood ply.

Time and Directions

Instructions are among the principal things that every beginner should follow. Instructions manual is very easy to understand the process, what to do and the way to get it done. Time also has an important role in the construction of woodworking projects. Woodworking projects demand time and so it is necessary for a novice to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword that can allow you to achieve success is proper preparation. With proper planning and a strategy, it is likely to achieve success immediately. If you know the objective of woodworking, the item that you want to build, the tools you need to own and the average time it’s possible to devote daily; then you’re ready to go.

Conclusion, Woodworking Tool Plans

These tips and education will create the woodworking projects and plans for beginners fast to finish. Always ensure that you have all of the essential tools, materials, space ready. Read the instructions for building a product handy. Proper strategy and planning can help you to earn a fantastic woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Tool Plans

Folks if you’re looking for a way to pass time or want an alternate method to generate money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you have to be quite careful when choosing which project to start out with since there are jobs that can be too tough for a beginner. But don’t worry about that because we are going to give you guidelines on the right way to start woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, therefore before you choose your project you need to be aware of whether you’ve got the available resources to work on such a job. Try not to spend a lot of cash on buying equipment when starting out, buy more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will be no gap between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Woodworking Tool Plans

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking at home will provide you time to explore different projects and learn a lot of things. That’s why it’s very important to spend less money when starting out so that you can manage to make errors and at any time learning about different jobs.
It is extremely important you know about different types of wood available for making jobs. Anticipate carpenters use different types of wood quality for decorating pieces, learning which type of wood they use can help you prepare the wood you’ll need for certain projects you may want to pursue.
Once you understand the basics of wood choice and the usage of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in building good jobs to satisfy your wants.

Woodworking Tool Plans practice makes perfect so make sure that you practice your work every day if possible. Try out lots of layouts utilizing various tools so that you can get the hang of working with the tools. When starting out you can earn a range of errors but with time you will find out how to correctly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Woodworking Tool Plans

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal number of tools and equipment. A little home workshop may generate a wide array of simple projects which will help you develop your creative and construction skills while rewarding you with practical and artistic wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will perform your woodworking, Depending on the dimensions of your house, you may have the ability to produce a dedicated space to your woodworking activities. This may be a reserved place on your garage or on your basement. In some cases, a detached shed or outbuilding may be ideal to prepare your very first store. A heated store detached from your house provides one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably produce dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air yields located in the cellar draw up dust into the upper levels of the home. Another advantage of detached workshops is, of course, the noise level. You can work without bothering the remainder of the household. A good compromise could be the garage of your property.

This can help minimize the problems of dust and noise, however depending on where you live, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Woodworking Tool Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they add more space to function in. Woodworking Tool Plans if you can have a dedicated spot for a marathon all the better. Floor gear and bench top equipment can stay in position from project to project. If this installation is not impossible, at least try to create a bench area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and equipment. In the beginning, establish a seat area where you can shop and use the majority of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to home your hands power tools and a pegboard over the seat to hang additional equipment. Put in a woodworking at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Tool Plans

The scope of your start-up equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, purchase your quality tools at your local building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other local ads. There are an abundance of quality gently used tools out there that belong to individuals who stumbled on that one molding project around the home or received tools as presents which they will never use. You can usually buy tools for these sellers for less than half of the original cost and save even more money should you create a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will take extra time and possibly travel expenses. Weigh out the advantages of traveling across town to save a few added bucks on a cheap piece of equipment. The excess cost of time and travel in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal quantity of hand equipment yet produced sophisticated and complex pieces. Concentrate on developing your abilities with your startup set of tools and prevent lamenting about the equipment you wished you had.
Here is a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together if you find them uneasy.

The next piece of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those sound levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire quicker when subjected to elevated noise levels. These may contain earplugs or full ear keyword muff protectors. I find that a quality set of ear muff protectors is perfect for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. I prefer a simple ball cap with my ear muffs and eye protection. With this setup I am protecting my eyes and my ears. I am keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often known as a skill saw after the favorite brand name, this may end up being the most flexible instrument in a start-up workshop. In reality, in the hands of a professional, a power hand saw can be employed to build an entire house. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you start your second job. After selecting the right saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut curves. It is ideal for cutting holes in timber too like handle slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their battery life tends to be poor and to make things worse keyless chucks come loose and slide often. This is one annoyance you do not want in your workshop. Buy an assortment of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its potential slot in the holder after every use. Last, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop accidents occur. Although the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the head and handle. The head typically comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce scope for overall work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll likely update to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander with just a little bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll get that this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in concept, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber bits. {Start with a standard number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, good clamps are costly and it normally requires the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Begin with a set of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the longest clamps that you can afford. You may contact them for smaller glue jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A shop vice installed in the end of the bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enabled the user to rapidly open and close the limbs without tedious handle turning. The timber clamping surfaces in your vice will occasionally require replacement. I prefer to utilize soft walnut in my vices which won’t crush or damage lots of the different forests that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of the most often used tools. Purchase a good quality name brand tape measure with a broad tape usually in the 25-foot selection. Even though in your store you may not use the tape in these spans, the larger tape steps offer more rigid tapes that won’t flop around and slide off the ending of planks. Measuring when you are by yourself will be a lot simpler, and of course, quality tape steps can last for many years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood.

What is Woodworking? How to Become a Master Woodworker From Your Own Home Woodworking Tool Plans

Woodworking is referred to as the building or the production of objects from wood. It is possible to produce a lot of different items from woodworking and these objects are often as big as gazebos or as small as wooden toys. No matter how big or small your personal project maybe you will be very likely to do that aim with woodworking. Additionally, woodworking has lots of personal in addition to emotional benefits! In this article, I will briefly identify some of the benefits for youpersonally.

Woodworking as a Career:

A lot of individuals who love to use their hands have turned that love into a profession through woodworking. People who build things from wood are usually known keyword as carpenters. Carpenters can operate on a number of woodworking jobs and occupation types. For example, some carpenters own their carpentry company and these individuals have the luxury to set their job hours. This advantage enables carpenters the chance to spend additional time with their families and have less job strain. Raising kids is a very difficult task regardless of what way you approach the task! To get a carpenter who possesses their own company, this job might not be as hard because that individual is going to have more time to be a part of his or her child’s lifetime. By playing a bigger part in the life span of your child you will be having a greater influence on the type of character that child develops into, which is a massive concern for any loving parent. In addition to these benefits, carpentry may also have health benefits too.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Tool Plans

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood round a whole lot. This results in more physical activity, which leads to better physical health. Keeping your body physically healthy is really important and keyword will help prevent the occurrence of various illnesses later on in life. By being physically fit you can reduce chances you will have a heart attack, have seizures, turned into a diabetic, and lower the chances of having a range of other illnesses.

Woodworking Tool Plans, Do It Yourself Woodworking Saves Money:

I always feel as I paid way too far when I visit home improvement shops and buy patio furniture, and I am sure that I am not the only person who has felt this way! A successful business owner once advised me to always raise the sales price of a commodity to double everything you got it for. In this manner, you can always decrease the merchandise to 50 percent off and still come out without acquiring any losses. This sounds like it may be exactly the same tactic that home improvement shops use in selling their wooden furniture products. Regardless, there is a way that you can get around paying the extra cash and that has to do with building it yourself. Luckily, there are several really excellent woodworking products that offer thousands of detailed woodworking keyword strategies for countless different project types. So, you can really build whatever you need or see in any home improvement store. Doing something does take a bit of time but the time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects