Woodworking Tools Canada | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they are after because most of the thoughts and projects Ted’s source are simple to understand and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking source.

Many might still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are in fact many things that place Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. People that are just getting started will discover the thoughts and jobs in Ted’s bundle quite easy. Without doubt, complicated carpentry is involved; however, they will find it really simple to follow Ted’s easy step by step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to find any project of their choice within this bundle quite readily, though there so many options.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who purchase it’ll be backed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down because of its large dimensions. Yet, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overrun considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found across the net. Ted has done his very best to direct them in every conceivable way he could, through simple to comprehend textual instructions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find inside. So, it’s certainly worth buying!

Starting Your First Woodworking Shop Woodworking Tools Canada

Woodworking is 1 hobby that could also be a rewarding profession if you love to work together with your hands and construct beautiful pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you’ll have the ability to build all kinds of furniture, (beds, table, and chairs), effortlessly. You can then sell your finished woodworking jobs and make a handsome profit. Woodworking Tools Canada.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to that expert craftsman degree is you will be able to build some really nice furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living room. It’ll be a subject of conversation whenever you have friends come over to see. They’ll ask: How can you create it? Where did you get the woodworking programs? Just how long can it take to complete the job? What type of wood did you use? What type of tools did you use? How on earth did you create such a beautiful piece of furniture? As you discuss your work, a sense of pride will encounter you and do not be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Woodworking Tools Canada

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to begin in Woodworking? Woodworking Tools Canada.

Begin with a concept in mind of what you want to construct and then get a really good woodworking project plan that is geared toward beginners. There are several small woodworking projects for beginners available for purchase from online woodworking merchants. Of course, you can start out with as expansive a woodworking program as you choose. However, the odds are if you begin with a small woodworking project initially, you’ll have a better chance of keyword finishing the project.

Your woodworking project plan must include some lists! Lists of: woodworking equipment, the amount and variety of wood required, and the required hand tools and power tools to complete the project. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your immediate or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t cheap. The newcomer needs good woodworking gear, but it is simple to break the bank buying a lot of tools you might not use all that often. When you do buy tools, buy quality. Do a little research and compare products. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t forget that the wood glue and a brush to spread the wood glue! Of course, you’ll need a dry place to work and may require a pair of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the crucial hand and power tools that novices will need. You can always increase your toolbox as you get experience!

Woodworking Tools Canada Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Every month the writers in woodworking publications do a story about the best way to improve your woodworking craft. Whether it’s showing you the way you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is purchasing educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodworking Tools Canada

If you’re just beginning and very enthusiastic about doing a DIY project for home then, woodworking could be fun. If you don’t have the proper information, instruction, and skill, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential factors you should keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you should first have to be very interested in woodworking. Making something new with your own hands is a special feeling. Don’t begin a project if you’re not interested, because this might land you at a terrible place.

2. Think of the primary reason for making this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your skills and analyze the time you have, until you start with a project.

4. Start projects that you’re able to finish. If you are in the midst of a work, then it’s wise not to begin any project at all.

Starting Your First Woodworking Shop Woodworking Tools Canada

If you keep those vital points in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking projects you want to begin with. As a beginner, always pick a job which has quite a basic construct up or a very simple construction. Some easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you could always proceed to the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should keyword be less complicated and less bothersome so that you have a better knowledge of working with woods and their resources. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Woodworking Tools Canada

Tools are the ways through which you will win the struggle of woodworking. A lot of men and women think that power tools are requires. But for beginners, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when mended with vises, offer ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things much easy for you. When you buy a hammer, always check the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws out there in the market. Choose a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you in advance woodworking. You might also purchase keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but using it would make work easier for you in a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the job much simple.

8. Other small and basic tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed price on woodworking jobs. Based on the type of job that you want to complete, pricing could be determined. The easy the project, the less price it involves. However, at the beginning purchasing the tools will be somewhat hefty. Because of this, it is much better to fix a budget on the resources, then keyword on the undertaking. Buying the basic tools will make certain you do not need to purchase any more material other than the wood ply.

Time and Directions

Instructions are one of the primary things which every newcomer should follow. It’s like the woodworking Bible. Instructions manual is quite easy to comprehend the procedure, what to do and the way to get it done. It keyword is a systematic manual for finishing the job. Time also plays an important part in the building of woodworking jobs. Woodworking projects require time and therefore it’s necessary for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword that will help you to achieve success is proper planning. With proper planning and a strategy, it is possible to achieve success immediately. If you understand the purpose of woodworking, the thing that you need to build, the tools you need to possess and the average time it’s possible to devote daily; then you are ready to go.

Conclusion, Woodworking Tools Canada

These strategies and instruction is likely to create the woodworking projects and strategies for novices fast to complete. Always make sure you have all of the essential tools, materials, space prepared. Read the instructions for constructing an item handy. Proper strategy and planning will allow you to make a great woodworking project for your property.

|

Starting Your First Woodworking Shop Woodworking Tools Canada

Folks when looking for a way to pass time or want an alternate way to generate money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can consider. When starting out you have to be quite cautious when choosing which job to begin with because there are jobs that can be too tough for a newbie. But don’t be concerned about that since we will provide you guidelines on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, therefore before you choose your project you need to know if you’ve got the available resources to work on that job. Try not to invest a lot of cash on purchasing equipment when starting out, purchase more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there will not be any difference between the artistic hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Tools Canada

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking in your home will give you time to explore unique jobs and find out so many things. That is why it’s important to spend less money when starting out so that you can manage to make errors and at any time learning about various jobs.
It’s very important you know more about the different types of wood available for making projects. Expect carpenters utilize several types of wood quality for decorating pieces, learning what kind of wood they use will allow you to prepare the wood you will need for certain jobs you may choose to pursue.
As soon as you know the basics of wood selection and the usage of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to satisfy your wants.

Woodworking Tools Canada practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of layouts utilizing a variety of tools so you can find the hang of working with the tools. When starting out you may earn a range of errors but with time you will find out how to properly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Tools Canada

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimum amount of tools and equipment. A small home workshop can produce a wide variety of simple projects which will help you develop your creative and building abilities while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us talk about where you will do your woodworking, Depending on the dimensions of your house, you may be able to create a dedicated space to your woodworking activities. This may be a reserved spot on your garage or on your basement. Sometimes, a detached shed or outbuilding might be perfect to set up your very first shop. A heated shop detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns located in the cellar draw dust up into the upper levels of the house. Another advantage of detached workshops is, of course, the sound level. You can work without bothering the rest of the household. A fantastic compromise could be the garage of your home.

This might help minimize the difficulties of dust and sound, however based on where you reside, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Tools Canada

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to work in. Woodworking Tools Canada if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top gear can remain in position from project to project. If this setup isn’t impossible, at least attempt to create a bench area where equipment could be saved and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and gear. In the start, establish a seat area where you are able to shop and use most of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. That will let you work comfortably while standing. Add a sturdy shelf below the bench to home your hand power tools and a pegboard above the bench to hang additional equipment. Put in a woodworking vice at one end of your bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Tools Canada

The reach of your start-up equipment will be largely based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools in your regional construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional ads. There are plenty of quality lightly used programs out there which belong to people who stumbled on that one molding job around the home or obtained tools as gifts that they will never use. You can usually purchase tools for all these sellers for under half of the original cost and save even more money if you create a package deal for all their unused equipment. Of course, getting tools from private people will take additional time and perhaps travel expenses. Weigh out the benefits of traveling across town to save a couple extra bucks on a inexpensive piece of equipment. The excess expense of time and travel in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal quantity of hand gear yet produced sophisticated and complex bits. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the equipment you wished you had.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next piece of critical safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. I prefer a very simple ball cap with my ear muffs and eye protection. With this set up I am shielding my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often known as a skill saw after the favorite name, this can end up being the most flexible tool in a startup workshop. In fact, in the hands of a professional, a power hand saw can be employed to construct an whole property. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your next job. After choosing the right saw install an excellent blade. Most saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid . These have a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument cannot only cut curves. It is ideal for cutting holes in timber too like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the standard 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this case, is more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need in your workshop. Purchase an range of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning every drill piece to its prospective slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the head and handle. The head typically comes loose and the tool becomes useless. Pick a title brand quality hammer in the 16-ounce range for general work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These types of hammers are more appropriate to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you will probably upgrade to a floor version disk and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface area. As you embark on the first few projects you might find your palm sander using a bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll find that this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper edges, flatten high spots and fix any imperfections in timber pieces. {Begin with a typical amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally takes the beginner woodworker a few years to accumulate a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the longest clamps which you could spend. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A store vice installed at the end of the seat is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enabled the consumer to quickly open and close the jaws with no dull handle rotation. The wood beamed surfaces in your vice will periodically require replacement. I prefer to utilize soft pine in my vices which won’t crush or damage many of the various forests that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most frequently used tools. Buy a good quality name brand tape measure with a broad tape usually in the 25-foot selection. Although in your store you may not use the tape at these lengths, the bigger tape measures offer more rigid tapes which won’t flop around and slip off the end of planks. Measuring when you’re by yourself will be a great deal simpler, and of course, quality tape measures can endure for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can assist you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I find the Robertson format works great for most woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes along the way.

Adhesives: Not many glues are made equal. Stay away from cheap house brands marketed as carpenter’s glue. The expense of glue through all of your projects is a minor cost consideration. For that reason, it makes sense to go with the best. I also have found over time that I get the best results with both indoor and outdoor projects once I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Woodworking Tools Canada

The peaceful gratification of woodworking is an excellent adventure in this day and age of rushed lives, smart phones, and time-starved careers. With a minimal investment in the most basic tools and equipment, anyone can learn the rewarding skills of his time-tested hobby and revel in project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Lee Valley Tools

The company is family-owned. The founder, Leonard Lee, was a recipient of the Order of Canada. He founded the company in 1978, in Ottawa, Ontario. Over the next ten years, the company opened several more stores (Toronto, Vancouver) and started manufacturing its own line of tools (starting with the Veritas Dovetail Marker in 1982). Since then, it has continued opening stores, manufacturing more diverse tools, and selling through mail order and the Internet. In 1998, Canica Design was launched. Canica is a medical design company associated with Lee Valley Tools[1] which arose out of consultations between Leonard Lee and surgeon Michael Bell after Lee found that Bell was using Lee Valley tools in his plastic surgery practice.

Lee Valley Tools is notable for enforcing and codifying the concept of “pay slope”[2] limiting the pay at the highest levels in the company based on what the lowest paid employees earn. They earned a slot in the Forbes Top 500 Employers list in 2018.[3]

The primary business is mail-order and retail, purveying mainly woodworking and gardening tools and equipment, as well as woodworking hardware and gifts. The consumer part of the business runs under the main company name, Lee Valley Tools.

Video: Woodworking Projects