Woodworking Tools Portland | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are following because all the ideas and jobs Ted’s resource are simple to understand and easy. Ted McGrath spent two years researching so he could gather enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking source.

Many might still appear unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more challenging to make the ideal option. There are in fact many things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. People who are just getting started will find the thoughts and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; however, they will find it really simple to follow Ted’s easy step-by-step directions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to locate any job of their choice within this package quite readily, even though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who buy it will be endorsed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large size. Nonetheless, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that are available across the internet. Ted has done his very best to direct them in every conceivable way he can, through easy to understand textual directions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. So, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools that beginners will need. You may always add to your arsenal as you gain experience!

Woodworking Tools Portland Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. But if you are not certain about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the writers in woodworking magazines do a story about the best way to increase your woodworking craft. When it is showing you the way you can apply a finish to a completed job, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Woodworking Tools Portland

If you are a beginner and very enthusiastic about doing a DIY job for house then, woodworking can be interesting. If you don’t have the proper information, instruction, and ability, you might wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential factors you need to remember, before starting with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Don’t begin a project if you’re not interested, as this may land you at a bad place.

2. Consider the primary reason for making this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your abilities and analyze the time that you have, until you begin with a job.

4. Start projects which you can finish. If you’re in the middle of some work, then it’s better to not start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Woodworking Tools Portland

If you maintain these essential things in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much as it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking jobs that you want to start with. As a newcomer, always pick a job that has quite a basic construct up or a very simple structure. A few simple to start projects include, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you can always proceed into the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning projects should always keyword be complicated and less frustrating so that you have a better knowledge of working with forests and their resources. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Woodworking Tools Portland

Tools are the ways through which you can win the battle of woodworking. Many people believe power tools are needs. But for beginners, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when mended with vises, provide ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things considerably simple for you. When you purchase a hammer, always assess the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are different types of saws available in the market. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Having all of them will help you in advance woodworking. You can also purchase keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but using it might make work simpler for you at a subsequent stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills will make the task much simple.

8. Additional small and fundamental tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed price on woodworking projects. Dependent on the type of job that you want to finish, pricing can be set. The simple the job, the less cost it involves. However, at the beginning purchasing the tools will probably be a little hefty. Therefore, it’s much better to resolve a budget first on the tools, then keyword on the project. Purchasing the basic tools will ensure that you don’t need to buy any more material other than the timber ply.

Time and Instructions

Directions are one of the principal things that each and every beginner should follow. Instructions guide is quite easy to comprehend the procedure, what to do and how to get it done. Time also plays an important part in the building of woodworking jobs. Woodworking projects require time and so it is crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to reach success is proper preparation. With proper planning and a plan, it’s likely to achieve success immediately. If you understand the objective of woodworking, then the item that you need to construct, the tools you require in order to own and the typical time you can give every day; then you’re all set to go.

Conclusion, Woodworking Tools Portland

These strategies and instruction will create the woodworking projects and strategies for beginners quickly to complete. Always make sure you have all the essential tools, materials, area prepared. Read the instructions for constructing a product handy. Appropriate strategy and planning will help you to earn a fantastic woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Woodworking Tools Portland

People when trying to find a way to pass time or desire an alternative way to make money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It’s very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you have to be quite cautious when choosing which job to begin with since you will find projects that may be too difficult for a beginner. But don’t worry about that since we are going to give you guidelines on the ideal means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, so before you pick your job you need to know whether you have the available resources to work on that job. Try not to spend a good deal of money on buying gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the hand and the normal hands.

Finding Woodworking Projects and Plans for Beginners Woodworking Tools Portland

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking in your home will give you time to explore unique projects and learn a lot of things. That is why it’s important to spend less money when starting out so you can afford to make errors and at some time learning about various projects.
It’s extremely important that you know about different kinds of wood available for making projects. Expect carpenters use several kinds of wood quality for decorating bits, learning which kind of wood that they use can allow you to prepare the wood you’ll need for certain projects you may choose to pursue.
Once you understand the fundamentals of wood choice and the usage of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in building good projects to satisfy your wants.

Woodworking Tools Portland practice makes perfect so be sure that you practice your work every day if at all possible. Try out a lot of layouts utilizing various tools so you may get the hang of using the tools. When starting out you can make a number of errors but with time you will learn how to correctly use them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Woodworking Tools Portland

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimal amount of gear and equipment. A small home workshop may generate a broad array of simple projects which can help you develop your creative and construction skills while rewarding you with artistic and practical wood products which you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us discuss where you will perform your woodworking, Depending on the dimensions of your home, you may have the ability to create a dedicated space into your woodworking tasks. This might be a reserved place on your garage or in your basement. In some cases, a detached shed or outbuilding might be ideal to set up your first shop. A heated shop detached from your house offers one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops would be, of course, the noise level. You can work without disturbing the rest of the household. A good compromise could be the garage of your property.

This can help decrease the problems of dust and sound, however depending on where you reside, a keyword garage layout may not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Woodworking Tools Portland

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Woodworking Tools Portland if you’re able to have a dedicated place for a workshop all the better. Floor tools and bench top equipment can stay in position from project to project. If this setup isn’t hopeless, at least attempt to make a chair area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. In the start, set up a seat area where you can store and use most of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will let you work comfortably while standing. Add a sturdy shelf below the seat to house your hand power tools along with a pegboard over the bench to hang other equipment. Put in a woodworking vice at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodworking Tools Portland

The scope of your start-up equipment will be mostly based on your financial plan. Whether you have got large financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, then buy your quality tools in your local construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other local advertisements. There are plenty of quality gently used tools out there that belong to individuals who embarked on that 1 molding job around the house or obtained tools as gifts that they will never utilize. You can usually purchase tools for all these sellers for under half the initial cost and save even more money if you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will take additional time and perhaps travel expenses. Weigh out the advantages of traveling around town to save a couple added bucks on a inexpensive piece of equipment. The excess cost of travel and time in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand equipment yet generated sophisticated and complex pieces. Concentrate on developing your skills with your startup set of resources and prevent lamenting about the gear you wished you had.
Here’s a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when exposed to high noise levels. Select powerful hearing protection which you find comfortable and effective. These can contain earplugs or complete ear keyword muff protectors. I find that a quality pair of ear muff protectors is perfect for hearing protection.

Lastly, wear a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. With this setup I am protecting my eyes and my ears. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw following the popular brand name, this may prove to be the most flexible tool in a start-up workshop. In reality, in the hands of an expert, a power hand saw can be used to construct an whole house. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your second job. After selecting the proper saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot just cut corners. It’s ideal for cutting holes in wood too like handle slots. Eventually, you’re going to want to get a band saw. Bandsaws are even more flexible but a quality floor unit could be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this case, is more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you do not want in your workshop. Buy an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning each drill bit to its potential slot in the holder after every use. Last, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents happen. Even though the most ordinary, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These kinds of hammers are more suited to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle pretty much any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you’ll likely upgrade to a floor model disc and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface space. As you embark on your first few projects you’ll discover your palm sander with just a bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get that this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools allow you to taper borders, flatten high spots and correct any imperfections in timber bits. {Start with a standard number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, good clamps are expensive and it usually takes the beginner woodworker a few years to collect a detailed set of timber clamps. Start with a set of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure is still the same. Receive a pair of the maximum clamps which you can spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A shop vice installed in the end of the seat is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enable the user to quickly open and close the limbs with no tedious handle rotation. The wood beamed surfaces in your vice will periodically need replacement. I would rather utilize soft pine in my vices that won’t crush or damage many of the various woods that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of your most frequently used tools. Buy a good excellent name brand tape measure with a wide tape typically from the 25-foot range. Even though in your store you may not use the tape at these lengths, the bigger tape measures offer more rigid tapes which won’t flop around and slip off the ending of boards. Measuring when you’re on your own will be a lot simpler, and naturally, quality tape measures can endure for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can help you in marking the ideal angles in addition to compound angles. Get the number two and three Robertson set. I find that the Robertson format works best for many woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes along the way.

Adhesives: Not many glues are created equal. Avoid inexpensive home brands sold as carpenter’s glue. The expense of glue through all of your jobs is a little cost consideration. For that reason, it makes sense to go with the very best. I also have discovered over time that I get the best results with both indoor and outdoor projects once I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Woodworking Tools Portland

The peaceful gratification of woodworking is a wonderful adventure in this era of rushed lives, smartphones, and time-starved careers. With a minimum investment at the most basic equipment and tools, everyone can learn the profitable skills of his time-tested avocation and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Chainsaws in popular culture

Chainsaws have appeared in countless films being used for their intended purpose, but this rarely if ever is given a prominent role in the plot. More prominent however is portrayals of chainsaws as weapons or torture devices.

Among the earliest films to portray chainsaws as weapons are Dark of the Sun (1968) and The Wizard of Gore (1970).[1] Wes Craven's 1972 film The Last House on the Left, would be referred to as “The original Chainsaw Massacre” in advertising campaigns during later re-releases.[2]

In 1974, arguably the most famous and influential chainsaw use in a film was seen when Tobe Hooper's The Texas Chain Saw Massacre was released. The film, loosely based on famous murderer Ed Gein (though unlike the killers in the film Gein did not use chainsaws), would etch the chainsaw into the public mind as an object of gruesome terror, even though actual chainsaw to flesh contact was only seen once in the whole movie. It would be followed by a direct sequel, two standalone sequels and in 2003 a remake which would receive its own prequel. Following its release, many horror films, especially lower budget ones, began to incorporate chainsaw gore scenes, a trend which continues to the present day.

Video: Woodworking Tools