X 4 Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they’re after because most of the thoughts and jobs Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more challenging to make the right option. There are actually lots of things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. People who are just getting started will discover the thoughts and projects in Ted’s bundle quite easy. Without doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s easy step by step directions. Currently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to locate any job of their choice in this package quite readily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who purchase it will be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast it contains just about every woodworking project a woodworker might be interested in building.

This woodworking bundle created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that are available throughout the internet. Ted has done his very best to guide them in every possible way he could, through easy to understand textual directions, clear pictures and even movies too.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools that beginners will need. You may always add to your arsenal as you gain experience!

X 4 Furniture Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to complete your project. However, if you’re not certain about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the writers in woodworking magazines do a story about how best to increase your woodworking craft. Whether it is showing you how you can apply an end to a completed job, or how to make a mortise and tenon joint, something new can be learned every month. Next, is purchasing educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home X 4 Furniture Plans

If you’re a beginner and very interested in doing a DIY job for home then, woodworking can be fun. If you don’t have the proper information, education, and skill, you might wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential aspects you should keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be somewhat interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a job if you are not interested, as this may land you at a terrible place.

2. Think of the primary reason for making this woodworking project. Choose the uses of the thing you are making.

3. Consider your abilities and examine the time that you have, before you begin with a project.

4. Start jobs which you can finish. If you are in the midst of some work, then it is better to not start any project in any way.

How to Become a Master Woodworker From Your Own Home X 4 Furniture Plans

If you keep these vital points in mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you wish to start with. As a newcomer, always select a project that has a very basic construct up or a simple structure. A few easy to start projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you could always proceed to the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so you have a better knowledge of working with woods and their resources. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, X 4 Furniture Plans

Tools are the ways whereby you will win the battle of woodworking. A lot of people believe power tools are requires. However, for beginners, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters much easy for you. When you purchase a hammer, always check the equilibrium between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there in the market. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them will help you in advance woodworking. You might even buy keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but having it might make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking jobs. Dependent on the type of project you would like to complete, pricing can be determined. The simple the job, the less cost it involves. But at the beginning buying the tools will probably be a little hefty. Because of this, it is better to fix a budget on the resources, then keyword on the project. Buying the basic tools will ensure that you don’t need to buy any more material aside from the timber ply.

Time and Directions

Instructions are one of the primary things which each and every beginner should follow. It’s like the woodworking Bible. Instructions guide is very simple to comprehend the procedure, what to do and how to get it done. It keyword is a systematic guide for finishing the project. Time also has an important role in the construction of woodworking jobs. Woodworking projects demand time and therefore it is necessary for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword that can allow you to achieve success is proper preparation. With proper planning and a plan, it is likely to achieve success quickly. If you know the purpose of woodworking, then the thing that you need to build, the resources you require to own and the average time you can give daily; then you’re all set to go.

Conclusion, X 4 Furniture Plans

These tips and education will make the woodworking projects and plans for beginners fast to complete. Always make sure that you have all of the essential tools, materials, area ready. Keep the instructions for constructing an item handy. Appropriate strategy and preparation will help you to make a great woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking X 4 Furniture Plans

Folks when looking for a way to pass time or want an alternate way to make money they generally turn into a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be very cautious when choosing which project to start out with because you will find jobs which may be too tough for a beginner. But do not be concerned about that since we will provide you guidelines on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, so before you choose your job you have to be aware of whether you have the available tools to work on such a project. Try not to spend a good deal of money on purchasing equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking X 4 Furniture Plans

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking at home will give you time to explore unique projects and learn a lot of things. That’s why it’s very important to spend less money when starting out so that you can afford to make errors and at some time learning about various jobs.
It’s extremely important that you know about different types of wood available for creating jobs. Expect carpenters utilize different kinds of wood quality for decorating pieces, learning what type of wood they use will allow you to prepare the wood you’ll need for specific projects you may choose to pursue.
Once you understand the basics of wood choice and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good projects to satisfy your wants.

X 4 Furniture Plans practice makes perfect so make sure you practice your work daily if possible. Try out a lot of layouts utilizing various tools so you can find the hang of using the tools. When starting out you may make a number of errors but with time you will learn how to properly use them and create quality projects.

|

Starting Your First Woodworking Shop X 4 Furniture Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimum amount of gear and equipment. A little home workshop can generate a wide array of simple projects which can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products which you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you’ll do your woodworking, Depending on the size of your home, you may have the ability to produce a dedicated space to your woodworking tasks. This might be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be perfect to set up your first store. A heated shop detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields located in the cellar draw dust up into the upper levels of the house. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without bothering the remainder of the family. A fantastic compromise might be the garage of your property.

This might help decrease the problems of dust and sound, however depending on where you live, a keyword garage layout might not be practical during extremes of cold or hot weather.

The Benefits of Woodworking X 4 Furniture Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they add more space to work in. X 4 Furniture Plans if you can have a dedicated place for a marathon all the greater. Floor tools and bench top equipment can remain in place from project to project. If this installation isn’t hopeless, at least attempt to make a chair area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and gear. At the start, set up a bench area where you can shop and use most of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Insert a sturdy shelf below the bench to home your hands power tools along with a pegboard over the bench to hang other gear. Install a woodworking vice at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, X 4 Furniture Plans

The scope of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools at the local construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional advertisements. There are plenty of quality lightly used tools out there that belong to individuals who embarked on that 1 molding project around the home or received tools as presents that they won’t ever use. You can usually purchase tools for these sellers for less than half the original cost and save even more money should you create a package deal for all their unused equipment. Of course, getting tools from private individuals will take additional time and perhaps travel expenses. Weigh the benefits of traveling across town to save a couple added bucks on a cheap piece of gear. The extra cost of time and travel in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand equipment yet produced sophisticated and complex bits. Focus on developing your skills with your start-up set of tools and avoid lamenting about the equipment you wished you’d.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together if you find them uncomfortable.

The next piece of crucial safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire quicker when exposed to elevated noise levels. Last, wear a cap to keep the dust from your hair. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the favorite name, this may end up being the most flexible instrument in a startup workshop. In fact, in the hands of a professional, a power hand saw could be used to build an whole house. As mentioned before get a quality brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your next job. After choosing the proper saw install an excellent blade. Most saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut corners. It’s perfect for cutting holes in timber also like handle slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the standard 3/8 inch model. Through tough lessons learned, I have found that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not want on your workshop. Buy an assortment of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after every use. Last, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents occur. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the head and handle. The head usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These types of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you will likely upgrade to a floor version disk and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might discover your palm sander using a bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks with 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an extra source of 100 grit paper. You’ll find this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in wood bits. {Start with a typical number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it usually requires the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Start with a set of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, but the structure is still the same. Get a set of the maximum clamps that you can afford. You can get in touch with them for smaller glue jobs and expand them to their full length for bigger projects.

Shop Vice: A shop vice installed at the end of your seat is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the better vices offer you quick release mechanisms that enable the consumer to rapidly open and close the limbs without dull handle rotation. The timber clamping surfaces in your vice will periodically need replacement. I prefer to utilize soft walnut in my vices which will not crush or damage many of the different woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among the most frequently used tools. Purchase a good excellent name brand tape measure with a broad tape typically in the 25-foot range. Although in your store you might not use the tape in these lengths, the larger tape steps provide more rigid tapes which won’t flop around and slide off the ending of planks. Measuring when you are on your own will be a great deal easier, and of course, quality tape steps can last for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will assist you in marking the right angles in addition to chemical angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works best for most woodworking jobs and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood files. The expense of glue through all of your projects is a little cost consideration. Therefore, it is sensible to go with the best. I have also found over the years that I receive the best results with both indoor and outdoor projects once I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, X 4 Furniture Plans

The peaceful gratification of woodworking is an excellent experience in this era of rushed lives, smart phones, and time-starved livelihood. With a minimum investment at the most basic equipment and tools, everyone can learn the rewarding skills of his time-tested hobby and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Nebraska Furniture Mart

Nebraska Furniture Mart is the largest home furnishing store in North America selling furniture, flooring, appliances and electronics. NFM was founded in 1937 by Belarus-born Rose Blumkin, universally known as Mrs. B., in Omaha, Nebraska, United States. Under the motto "sell cheap and tell the truth,"[1] she worked in the business until age 103. In 1983, Mrs. B. sold a majority interest to Berkshire Hathaway in a handshake deal with Warren Buffett.[1][2]

Nebraska Furniture Mart was founded in 1937 by Rose Blumkin (born December 3, 1893-1998), universally known as "Mrs. B.", in Omaha, Nebraska. Blumkin, borrowed the initial $500 investment from her brother,[1] while her husband Isadore continued to run their second hand clothing store.[2] At one point early on, the Blumkins had to sell their own home furnishings to pay off a debt. Mrs. B set the Mart apart by selling products cheaper than the other furniture store around. The bigger competitors were able to successfully get the furniture suppliers to stop selling to the Mart because of the prices. Rather than give up and raise prices, Mrs. B went to other suppliers around the country while still underselling her competitors.[2]

In 1983, at age 89, Mrs. B sold 80%[3] of Nebraska Furniture Mart to Warren Buffett in a one-page handshake deal.[2][1] Buffett bought the company without auditing her inventory or books, instead basing the deal on his own shopping experience at the Mart and his respect for the Blumkin family.[4] Mrs. B sold the business due to her belief that if she sold before her death, her children wouldn't fight over the company. She continued to work at the store, putting in her normal 70 hour work week, using an electric scooter to get around.[2] Soon after the sale, Buffett would say, “Put her up against the top graduates of the top business schools or chief executives of the Fortune 500 and, assuming an even start with the same resources, she’d run rings around them.”[4]

Video: Woodworking Projects